mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
	<pabeni@redhat.com>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>,
	<vladimir.oltean@nxp.com>, <grygorii.strashko@ti.com>,
	<vigneshr@ti.com>, <nsekhar@ti.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <kishon@ti.com>,
	Siddharth Vadapalli <s-vadapalli@ti.com>
Subject: [PATCH v2 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G
Date: Thu, 2 Jun 2022 17:15:56 +0530	[thread overview]
Message-ID: <20220602114558.6204-2-s-vadapalli@ti.com> (raw)
In-Reply-To: <20220602114558.6204-1-s-vadapalli@ti.com>

Update bindings for TI K3 J7200 SoC which contains 5 ports (4 external
ports) CPSW5G module and add compatible for it.

Changes made:
    - Add new compatible ti,j7200-cpswxg-nuss for CPSW5G.
    - Extend pattern properties for new compatible.
    - Change maximum number of CPSW ports to 4 for new compatible.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 .../bindings/net/ti,k3-am654-cpsw-nuss.yaml   | 140 ++++++++++++------
 1 file changed, 98 insertions(+), 42 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index b8281d8be940..ec57bde7ac26 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -57,6 +57,7 @@ properties:
       - ti,am654-cpsw-nuss
       - ti,j721e-cpsw-nuss
       - ti,am642-cpsw-nuss
+      - ti,j7200-cpswxg-nuss
 
   reg:
     maxItems: 1
@@ -108,48 +109,103 @@ properties:
         const: 1
       '#size-cells':
         const: 0
-
-    patternProperties:
-      port@[1-2]:
-        type: object
-        description: CPSWxG NUSS external ports
-
-        $ref: ethernet-controller.yaml#
-
-        properties:
-          reg:
-            minimum: 1
-            maximum: 2
-            description: CPSW port number
-
-          phys:
-            maxItems: 1
-            description: phandle on phy-gmii-sel PHY
-
-          label:
-            description: label associated with this port
-
-          ti,mac-only:
-            $ref: /schemas/types.yaml#/definitions/flag
-            description:
-              Specifies the port works in mac-only mode.
-
-          ti,syscon-efuse:
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-            items:
-              - items:
-                  - description: Phandle to the system control device node which
-                      provides access to efuse
-                  - description: offset to efuse registers???
-            description:
-              Phandle to the system control device node which provides access
-              to efuse IO range with MAC addresses
-
-        required:
-          - reg
-          - phys
-
-    additionalProperties: false
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - ti,am654-cpsw-nuss
+                  - ti,j721e-cpsw-nuss
+                  - ti,am642-cpsw-nuss
+        then:
+          patternProperties:
+            port@[1-2]:
+              type: object
+              description: CPSWxG NUSS external ports
+
+              $ref: ethernet-controller.yaml#
+
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 2
+                  description: CPSW port number
+
+                phys:
+                  maxItems: 1
+                  description: phandle on phy-gmii-sel PHY
+
+                label:
+                  description: label associated with this port
+
+                ti,mac-only:
+                  $ref: /schemas/types.yaml#/definitions/flag
+                  description:
+                    Specifies the port works in mac-only mode.
+
+                ti,syscon-efuse:
+                  $ref: /schemas/types.yaml#/definitions/phandle-array
+                  items:
+                    - items:
+                        - description: Phandle to the system control device node which
+                            provides access to efuse
+                        - description: offset to efuse registers???
+                  description:
+                    Phandle to the system control device node which provides access
+                    to efuse IO range with MAC addresses
+
+              required:
+                - reg
+                - phys
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - ti,j7200-cpswxg-nuss
+        then:
+          patternProperties:
+            port@[1-4]:
+              type: object
+              description: CPSWxG NUSS external ports
+
+              $ref: ethernet-controller.yaml#
+
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 4
+                  description: CPSW port number
+
+                phys:
+                  maxItems: 1
+                  description: phandle on phy-gmii-sel PHY
+
+                label:
+                  description: label associated with this port
+
+                ti,mac-only:
+                  $ref: /schemas/types.yaml#/definitions/flag
+                  description:
+                    Specifies the port works in mac-only mode.
+
+                ti,syscon-efuse:
+                  $ref: /schemas/types.yaml#/definitions/phandle-array
+                  items:
+                    - items:
+                        - description: Phandle to the system control device node which
+                            provides access to efuse
+                        - description: offset to efuse registers???
+                  description:
+                    Phandle to the system control device node which provides access
+                    to efuse IO range with MAC addresses
+
+              required:
+                - reg
+                - phys
+
+  additionalProperties: false
 
 patternProperties:
   "^mdio@[0-9a-f]+$":
-- 
2.36.1


  reply	other threads:[~2022-06-02 11:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-02 11:45 [PATCH v2 0/3] J7200: CPSW5G: Add support for QSGMII mode to am65-cpsw driver Siddharth Vadapalli
2022-06-02 11:45 ` Siddharth Vadapalli [this message]
2022-06-05 22:43   ` [PATCH v2 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Update bindings for J7200 CPSW5G Rob Herring
2022-06-06  6:20     ` Siddharth Vadapalli
2022-06-02 11:45 ` [PATCH v2 2/3] net: ethernet: ti: am65-cpsw: Add support " Siddharth Vadapalli
2022-06-02 11:45 ` [PATCH v2 3/3] net: ethernet: ti: am65-cpsw: Move phy_set_mode_ext() to correct location Siddharth Vadapalli
2022-06-03  2:48 ` [PATCH v2 0/3] J7200: CPSW5G: Add support for QSGMII mode to am65-cpsw driver Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220602114558.6204-2-s-vadapalli@ti.com \
    --to=s-vadapalli@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=grygorii.strashko@ti.com \
    --cc=kishon@ti.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®