[PATCH] m68k: mac: Fix typo in comment

[Xiang wangx <wangxiang@cdjrlc.com>]

Delete the redundant word 'an'.
Delete the redundant word 'and'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
---
 arch/m68k/mac/iop.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index de156a027f5b..b0e1db19f45f 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -25,7 +25,7 @@
  *		  check this.)
  * 990605 (jmt) - Rearranged things a bit wrt IOP detection; iop_present is
  *		  gone, IOP base addresses are now in an array and the
- *		  globally-visible functions take an IOP number instead of an
+ *		  globally-visible functions take an IOP number instead of
  *		  an actual base address.
  * 990610 (jmt) - Finished the message passing framework and it seems to work.
  *		  Sending _definitely_ works; my adb-bus.c mods can send
@@ -66,7 +66,7 @@
  * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
  * channel is connected to a specific software driver on the IOP. For example
  * on the SCC IOP there is one channel for each serial port. Each channel has
- * an incoming and and outgoing message queue with a depth of one.
+ * an incoming and outgoing message queue with a depth of one.
  *
  * A message is 32 bytes plus a state byte for the channel (MSG_IDLE, MSG_NEW,
  * MSG_RCVD, MSG_COMPLETE). To send a message you copy the message into the
-- 
2.36.1