[PATCH] m68k: mac: Fix typo in comment

[PATCH] m68k: mac: Fix typo in comment

[Xiang wangx]

Delete the redundant word 'an'.
Delete the redundant word 'and'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
---
 arch/m68k/mac/iop.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index de156a027f5b..b0e1db19f45f 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -25,7 +25,7 @@
  *		  check this.)
  * 990605 (jmt) - Rearranged things a bit wrt IOP detection; iop_present is
  *		  gone, IOP base addresses are now in an array and the
- *		  globally-visible functions take an IOP number instead of an
+ *		  globally-visible functions take an IOP number instead of
  *		  an actual base address.
  * 990610 (jmt) - Finished the message passing framework and it seems to work.
  *		  Sending _definitely_ works; my adb-bus.c mods can send
@@ -66,7 +66,7 @@
  * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
  * channel is connected to a specific software driver on the IOP. For example
  * on the SCC IOP there is one channel for each serial port. Each channel has
- * an incoming and and outgoing message queue with a depth of one.
+ * an incoming and outgoing message queue with a depth of one.
  *
  * A message is 32 bytes plus a state byte for the channel (MSG_IDLE, MSG_NEW,
  * MSG_RCVD, MSG_COMPLETE). To send a message you copy the message into the
-- 
2.36.1

Re: [PATCH] m68k: mac: Fix typo in comment

[Geert Uytterhoeven]

Hi Xiang,

On Fri, Jun 10, 2022 at 10:22 AM Xiang wangx <wangxiang@cdjrlc.com> wrote:
> Delete the redundant word 'an'.
> Delete the redundant word 'and'.
>
> Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>

Thanks for your patch!

> --- a/arch/m68k/mac/iop.c
> +++ b/arch/m68k/mac/iop.c
> @@ -25,7 +25,7 @@
>   *               check this.)
>   * 990605 (jmt) - Rearranged things a bit wrt IOP detection; iop_present is
>   *               gone, IOP base addresses are now in an array and the
> - *               globally-visible functions take an IOP number instead of an
> + *               globally-visible functions take an IOP number instead of

OK

>   *               an actual base address.
>   * 990610 (jmt) - Finished the message passing framework and it seems to work.
>   *               Sending _definitely_ works; my adb-bus.c mods can send
> @@ -66,7 +66,7 @@
>   * a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
>   * channel is connected to a specific software driver on the IOP. For example
>   * on the SCC IOP there is one channel for each serial port. Each channel has
> - * an incoming and and outgoing message queue with a depth of one.
> + * an incoming and outgoing message queue with a depth of one.

The second "and" should not be deleted, but replaced by "an".

>   *
>   * A message is 32 bytes plus a state byte for the channel (MSG_IDLE, MSG_NEW,
>   * MSG_RCVD, MSG_COMPLETE). To send a message you copy the message into the

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds