[PATCH 1/6] ASoC: dapm: Initialise kcontrol data for mux/demux controls

[PATCH 1/6] ASoC: dapm: Initialise kcontrol data for mux/demux controls

[Charles Keepax]

DAPM keeps a copy of the current value of mux/demux controls,
however this value is only initialised in the case of autodisable
controls. This leads to false notification events when first
modifying a DAPM kcontrol that has a non-zero default.

Autodisable controls are left as they are, since they already
initialise the value, and there would be more work required to
support autodisable muxes where the first option isn't disabled
and/or that isn't the default.

Technically this issue could affect mixer/switch elements as well,
although not on any of the devices I am currently running. There
is also a little more work to do to address the issue there due to
that side supporting stereo controls, so that has not been tackled
in this patch.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/soc-dapm.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 869c76506b669..a8e842e02cdc2 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -62,6 +62,8 @@ struct snd_soc_dapm_widget *
 snd_soc_dapm_new_control_unlocked(struct snd_soc_dapm_context *dapm,
 			 const struct snd_soc_dapm_widget *widget);
 
+static unsigned int soc_dapm_read(struct snd_soc_dapm_context *dapm, int reg);
+
 /* dapm power sequences - make this per codec in the future */
 static int dapm_up_seq[] = {
 	[snd_soc_dapm_pre] = 1,
@@ -442,6 +444,9 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget,
 
 			snd_soc_dapm_add_path(widget->dapm, data->widget,
 					      widget, NULL, NULL);
+		} else if (e->reg != SND_SOC_NOPM) {
+			data->value = soc_dapm_read(widget->dapm, e->reg) &
+				      (e->mask << e->shift_l);
 		}
 		break;
 	default:
-- 
2.30.2

[PATCH 2/6] ASoC: cs35l41: Add ASP TX3/4 source to register patch

[Charles Keepax]

The mixer controls for ASP TX3/4 are set to values that are not included
in their enumeration control. This will cause spurious event
notifications when the controls are first changed, as the register value
changes whilst the actual visible enumeration value does not. Use the
register patch to set them to a known value, zero, which equates to zero
fill, thereby avoiding the spurious notifications.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/cs35l41-lib.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs35l41-lib.c b/sound/soc/codecs/cs35l41-lib.c
index 0c7d1c7912798..04be71435491e 100644
--- a/sound/soc/codecs/cs35l41-lib.c
+++ b/sound/soc/codecs/cs35l41-lib.c
@@ -37,8 +37,8 @@ static const struct reg_default cs35l41_reg[] = {
 	{ CS35L41_DAC_PCM1_SRC,			0x00000008 },
 	{ CS35L41_ASP_TX1_SRC,			0x00000018 },
 	{ CS35L41_ASP_TX2_SRC,			0x00000019 },
-	{ CS35L41_ASP_TX3_SRC,			0x00000020 },
-	{ CS35L41_ASP_TX4_SRC,			0x00000021 },
+	{ CS35L41_ASP_TX3_SRC,			0x00000000 },
+	{ CS35L41_ASP_TX4_SRC,			0x00000000 },
 	{ CS35L41_DSP1_RX1_SRC,			0x00000008 },
 	{ CS35L41_DSP1_RX2_SRC,			0x00000009 },
 	{ CS35L41_DSP1_RX3_SRC,			0x00000018 },
@@ -644,6 +644,8 @@ static const struct reg_sequence cs35l41_reva0_errata_patch[] = {
 	{ CS35L41_DSP1_XM_ACCEL_PL0_PRI, 0x00000000 },
 	{ CS35L41_PWR_CTRL2,		 0x00000000 },
 	{ CS35L41_AMP_GAIN_CTRL,	 0x00000000 },
+	{ CS35L41_ASP_TX3_SRC,		 0x00000000 },
+	{ CS35L41_ASP_TX4_SRC,		 0x00000000 },
 };
 
 static const struct reg_sequence cs35l41_revb0_errata_patch[] = {
@@ -655,6 +657,8 @@ static const struct reg_sequence cs35l41_revb0_errata_patch[] = {
 	{ CS35L41_DSP1_XM_ACCEL_PL0_PRI, 0x00000000 },
 	{ CS35L41_PWR_CTRL2,		 0x00000000 },
 	{ CS35L41_AMP_GAIN_CTRL,	 0x00000000 },
+	{ CS35L41_ASP_TX3_SRC,		 0x00000000 },
+	{ CS35L41_ASP_TX4_SRC,		 0x00000000 },
 };
 
 static const struct reg_sequence cs35l41_revb2_errata_patch[] = {
@@ -666,6 +670,8 @@ static const struct reg_sequence cs35l41_revb2_errata_patch[] = {
 	{ CS35L41_DSP1_XM_ACCEL_PL0_PRI, 0x00000000 },
 	{ CS35L41_PWR_CTRL2,		 0x00000000 },
 	{ CS35L41_AMP_GAIN_CTRL,	 0x00000000 },
+	{ CS35L41_ASP_TX3_SRC,		 0x00000000 },
+	{ CS35L41_ASP_TX4_SRC,		 0x00000000 },
 };
 
 static const struct reg_sequence cs35l41_fs_errata_patch[] = {
-- 
2.30.2

[PATCH 3/6] ASoC: cs47l15: Fix event generation for low power mux control

[Charles Keepax]

cs47l15_in1_adc_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the value is
changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/cs47l15.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs47l15.c b/sound/soc/codecs/cs47l15.c
index 391fd7da331fd..1c7d52bef8935 100644
--- a/sound/soc/codecs/cs47l15.c
+++ b/sound/soc/codecs/cs47l15.c
@@ -122,6 +122,9 @@ static int cs47l15_in1_adc_put(struct snd_kcontrol *kcontrol,
 		snd_soc_kcontrol_component(kcontrol);
 	struct cs47l15 *cs47l15 = snd_soc_component_get_drvdata(component);
 
+	if (!!ucontrol->value.integer.value[0] == cs47l15->in1_lp_mode)
+		return 0;
+
 	switch (ucontrol->value.integer.value[0]) {
 	case 0:
 		/* Set IN1 to normal mode */
@@ -150,7 +153,7 @@ static int cs47l15_in1_adc_put(struct snd_kcontrol *kcontrol,
 		break;
 	}
 
-	return 0;
+	return 1;
 }
 
 static const struct snd_kcontrol_new cs47l15_snd_controls[] = {
-- 
2.30.2

[PATCH 4/6] ASoC: madera: Fix event generation for OUT1 demux

[Charles Keepax]

madera_out1_demux_put returns the value of
snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for
the kcontrol. This is obviously different to the expected return a 1 if
the control was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/madera.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/madera.c b/sound/soc/codecs/madera.c
index 272041c6236a9..8095a87117cf8 100644
--- a/sound/soc/codecs/madera.c
+++ b/sound/soc/codecs/madera.c
@@ -618,7 +618,13 @@ int madera_out1_demux_put(struct snd_kcontrol *kcontrol,
 end:
 	snd_soc_dapm_mutex_unlock(dapm);
 
-	return snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+	ret = snd_soc_dapm_mux_update_power(dapm, kcontrol, mux, e, NULL);
+	if (ret < 0) {
+		dev_err(madera->dev, "Failed to update demux power state: %d\n", ret);
+		return ret;
+	}
+
+	return change;
 }
 EXPORT_SYMBOL_GPL(madera_out1_demux_put);
 
-- 
2.30.2

[PATCH 5/6] ASoC: madera: Fix event generation for rate controls

[Charles Keepax]

madera_adsp_rate_put always returns zero regardless of if the control
value was updated. This results in missing notifications to user-space
of the control change. Update the handling to return 1 when the
value is changed.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/codecs/madera.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/madera.c b/sound/soc/codecs/madera.c
index 8095a87117cf8..b9f19fbd29114 100644
--- a/sound/soc/codecs/madera.c
+++ b/sound/soc/codecs/madera.c
@@ -899,7 +899,7 @@ static int madera_adsp_rate_put(struct snd_kcontrol *kcontrol,
 	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	const int adsp_num = e->shift_l;
 	const unsigned int item = ucontrol->value.enumerated.item[0];
-	int ret;
+	int ret = 0;
 
 	if (item >= e->items)
 		return -EINVAL;
@@ -916,10 +916,10 @@ static int madera_adsp_rate_put(struct snd_kcontrol *kcontrol,
 			 "Cannot change '%s' while in use by active audio paths\n",
 			 kcontrol->id.name);
 		ret = -EBUSY;
-	} else {
+	} else if (priv->adsp_rate_cache[adsp_num] != e->values[item]) {
 		/* Volatile register so defer until the codec is powered up */
 		priv->adsp_rate_cache[adsp_num] = e->values[item];
-		ret = 0;
+		ret = 1;
 	}
 
 	mutex_unlock(&priv->rate_lock);
-- 
2.30.2

[PATCH 6/6] ASoC: dapm: Move stereo autodisable check

[Charles Keepax]

Tidy up the code a little, rather than repeating the check of
mc->autodisable move the stereo error check to be under the
existing if for mc->autodisable.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
 sound/soc/soc-dapm.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index a8e842e02cdc2..b05231414c1d0 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -370,14 +370,14 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget,
 	case snd_soc_dapm_mixer_named_ctl:
 		mc = (struct soc_mixer_control *)kcontrol->private_value;
 
-		if (mc->autodisable && snd_soc_volsw_is_stereo(mc))
-			dev_warn(widget->dapm->dev,
-				 "ASoC: Unsupported stereo autodisable control '%s'\n",
-				 ctrl_name);
-
 		if (mc->autodisable) {
 			struct snd_soc_dapm_widget template;
 
+			if (snd_soc_volsw_is_stereo(mc))
+				dev_warn(widget->dapm->dev,
+					 "ASoC: Unsupported stereo autodisable control '%s'\n",
+					 ctrl_name);
+
 			name = kasprintf(GFP_KERNEL, "%s %s", ctrl_name,
 					 "Autodisable");
 			if (!name) {
-- 
2.30.2

Re: (subset) [PATCH 1/6] ASoC: dapm: Initialise kcontrol data for mux/demux controls

[Mark Brown]

On Thu, 23 Jun 2022 11:51:15 +0100, Charles Keepax wrote:
> DAPM keeps a copy of the current value of mux/demux controls,
> however this value is only initialised in the case of autodisable
> controls. This leads to false notification events when first
> modifying a DAPM kcontrol that has a non-zero default.
> 
> Autodisable controls are left as they are, since they already
> initialise the value, and there would be more work required to
> support autodisable muxes where the first option isn't disabled
> and/or that isn't the default.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[6/6] ASoC: dapm: Move stereo autodisable check
      commit: 4d6c2b46d81765e920007f76185a8d1fb5e41ca3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark