mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
	Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	Maxim Levitsky <mlevitsk@redhat.com>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 13/25] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING in setup_vmcs_config()
Date: Fri,  8 Jul 2022 16:42:11 +0200	[thread overview]
Message-ID: <20220708144223.610080-14-vkuznets@redhat.com> (raw)
In-Reply-To: <20220708144223.610080-1-vkuznets@redhat.com>

CPU_BASED_{INTR,NMI}_WINDOW_EXITING controls are toggled dynamically by
vmx_enable_{irq,nmi}_window, handle_interrupt_window(), handle_nmi_window()
but setup_vmcs_config() doesn't check their existence. Add the check and
filter the controls out in vmx_exec_control().

Note: KVM explicitly supports CPUs without VIRTUAL_NMIS and all these CPUs
are supposedly lacking NMI_WINDOW_EXITING too. Adjust cpu_has_virtual_nmis()
accordingly.

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
---
 arch/x86/kvm/vmx/capabilities.h | 3 ++-
 arch/x86/kvm/vmx/vmx.c          | 8 +++++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/vmx/capabilities.h b/arch/x86/kvm/vmx/capabilities.h
index 069d8d298e1d..07e7492fe72a 100644
--- a/arch/x86/kvm/vmx/capabilities.h
+++ b/arch/x86/kvm/vmx/capabilities.h
@@ -82,7 +82,8 @@ static inline bool cpu_has_vmx_basic_inout(void)
 
 static inline bool cpu_has_virtual_nmis(void)
 {
-	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
+	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS &&
+		vmcs_config.cpu_based_exec_ctrl & CPU_BASED_NMI_WINDOW_EXITING;
 }
 
 static inline bool cpu_has_vmx_preemption_timer(void)
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 1aaec4d19e1b..ce54f13d8da1 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2487,10 +2487,12 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 	      CPU_BASED_MWAIT_EXITING |
 	      CPU_BASED_MONITOR_EXITING |
 	      CPU_BASED_INVLPG_EXITING |
-	      CPU_BASED_RDPMC_EXITING;
+	      CPU_BASED_RDPMC_EXITING |
+	      CPU_BASED_INTR_WINDOW_EXITING;
 
 	opt = CPU_BASED_TPR_SHADOW |
 	      CPU_BASED_USE_MSR_BITMAPS |
+	      CPU_BASED_NMI_WINDOW_EXITING |
 	      CPU_BASED_ACTIVATE_SECONDARY_CONTROLS |
 	      CPU_BASED_ACTIVATE_TERTIARY_CONTROLS;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
@@ -4299,6 +4301,10 @@ static u32 vmx_exec_control(struct vcpu_vmx *vmx)
 {
 	u32 exec_control = vmcs_config.cpu_based_exec_ctrl;
 
+	/* INTR_WINDOW_EXITING and NMI_WINDOW_EXITING are toggled dynamically */
+	exec_control &= ~(CPU_BASED_INTR_WINDOW_EXITING |
+			  CPU_BASED_NMI_WINDOW_EXITING);
+
 	if (vmx->vcpu.arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)
 		exec_control &= ~CPU_BASED_MOV_DR_EXITING;
 
-- 
2.35.3


  parent reply	other threads:[~2022-07-08 14:43 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-08 14:41 [PATCH v3 00/25] KVM: VMX: Support updated eVMCSv1 revision + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-07-08 14:41 ` [PATCH v3 01/25] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags Vitaly Kuznetsov
2022-07-12 11:49   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 02/25] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-07-08 14:42 ` [PATCH v3 03/25] x86/hyperv: Update " Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-12 12:19     ` Vitaly Kuznetsov
2022-07-08 14:42 ` [PATCH v3 04/25] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-07-12 11:50   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 05/25] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 06/25] KVM: x86: hyper-v: Cache HYPERV_CPUID_NESTED_FEATURES CPUID leaf Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-13 15:45     ` Vitaly Kuznetsov
2022-07-08 14:42 ` [PATCH v3 07/25] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 08/25] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-07-12 11:52   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 09/25] KVM: VMX: nVMX: Support TSC scaling and PERF_GLOBAL_CTRL with enlightened VMCS Vitaly Kuznetsov
2022-07-12 11:53   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 10/25] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-07-12 11:54   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 11/25] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-12 11:54   ` Maxim Levitsky
2022-07-12 12:14     ` Vitaly Kuznetsov
2022-07-12 12:16       ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 12/25] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-07-12 11:55   ` Maxim Levitsky
2022-07-08 14:42 ` Vitaly Kuznetsov [this message]
2022-07-12 11:55   ` [PATCH v3 13/25] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 14/25] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-07-12 11:56   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 15/25] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-07-12 11:56   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 16/25] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-12 11:56   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 17/25] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-12 11:57   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 18/25] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-12 11:57   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 19/25] KVM: VMX: Adjust CR3/INVPLG interception for EPT=y at runtime, not setup Vitaly Kuznetsov
2022-07-12 11:58   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 20/25] KVM: x86: VMX: Replace some Intel model numbers with mnemonics Vitaly Kuznetsov
2022-07-12 11:58   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 21/25] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-12 11:59   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 22/25] KVM: nVMX: Always set required-1 bits of pinbased_ctls to PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR Vitaly Kuznetsov
2022-07-12 12:02   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 23/25] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-12 12:11   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 24/25] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-07-12 12:11   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 25/25] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-07-12 12:11   ` Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220708144223.610080-14-vkuznets@redhat.com \
    --to=vkuznets@redhat.com \
    --cc=anrayabh@linux.microsoft.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlevitsk@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®