mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Maxim Levitsky <mlevitsk@redhat.com>
To: Vitaly Kuznetsov <vkuznets@redhat.com>,
	kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
	Sean Christopherson <seanjc@google.com>
Cc: Anirudh Rayabharam <anrayabh@linux.microsoft.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>,
	linux-hyperv@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 23/25] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs
Date: Tue, 12 Jul 2022 15:11:23 +0300	[thread overview]
Message-ID: <b9523b41105fb3405f770b428921bfc932ad6fef.camel@redhat.com> (raw)
In-Reply-To: <20220708144223.610080-24-vkuznets@redhat.com>

On Fri, 2022-07-08 at 16:42 +0200, Vitaly Kuznetsov wrote:
> Using raw host MSR values for setting up nested VMX control MSRs is
> incorrect as some features need to disabled, e.g. when KVM runs as
> a nested hypervisor on Hyper-V and uses Enlightened VMCS or when a
> workaround for IA32_PERF_GLOBAL_CTRL is applied. For non-nested VMX, this
> is done in setup_vmcs_config() and the result is stored in vmcs_config.
> Use it for setting up allowed-1 bits in nested VMX MSRs too.
> 
> Suggested-by: Sean Christopherson <seanjc@google.com>
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> ---
>  arch/x86/kvm/vmx/nested.c | 30 ++++++++++++------------------
>  arch/x86/kvm/vmx/nested.h |  2 +-
>  arch/x86/kvm/vmx/vmx.c    |  5 ++---
>  3 files changed, 15 insertions(+), 22 deletions(-)
> 
> diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
> index 09654d5c2144..3d386c663fac 100644
> --- a/arch/x86/kvm/vmx/nested.c
> +++ b/arch/x86/kvm/vmx/nested.c
> @@ -6565,8 +6565,10 @@ static u64 nested_vmx_calc_vmcs_enum_msr(void)
>   * bit in the high half is on if the corresponding bit in the control field
>   * may be on. See also vmx_control_verify().
>   */
> -void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
> +void nested_vmx_setup_ctls_msrs(struct vmcs_config *vmcs_conf, u32 ept_caps)
>  {
> +       struct nested_vmx_msrs *msrs = &vmcs_conf->nested;
> +
>         /*
>          * Note that as a general rule, the high half of the MSRs (bits in
>          * the control fields which may be 1) should be initialized by the
> @@ -6583,11 +6585,10 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
>          */
>  
>         /* pin-based controls */
> -       rdmsr(MSR_IA32_VMX_PINBASED_CTLS,
> -               msrs->pinbased_ctls_low,
> -               msrs->pinbased_ctls_high);
>         msrs->pinbased_ctls_low =
>                 PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR;
> +
> +       msrs->pinbased_ctls_high = vmcs_conf->pin_based_exec_ctrl;
>         msrs->pinbased_ctls_high &=
>                 PIN_BASED_EXT_INTR_MASK |
>                 PIN_BASED_NMI_EXITING |
> @@ -6598,12 +6599,10 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
>                 PIN_BASED_VMX_PREEMPTION_TIMER;
>  
>         /* exit controls */
> -       rdmsr(MSR_IA32_VMX_EXIT_CTLS,
> -               msrs->exit_ctls_low,
> -               msrs->exit_ctls_high);
>         msrs->exit_ctls_low =
>                 VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR;
>  
> +       msrs->exit_ctls_high = vmcs_conf->vmexit_ctrl;
>         msrs->exit_ctls_high &=
>  #ifdef CONFIG_X86_64
>                 VM_EXIT_HOST_ADDR_SPACE_SIZE |
> @@ -6619,11 +6618,10 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
>         msrs->exit_ctls_low &= ~VM_EXIT_SAVE_DEBUG_CONTROLS;
>  
>         /* entry controls */
> -       rdmsr(MSR_IA32_VMX_ENTRY_CTLS,
> -               msrs->entry_ctls_low,
> -               msrs->entry_ctls_high);
>         msrs->entry_ctls_low =
>                 VM_ENTRY_ALWAYSON_WITHOUT_TRUE_MSR;
> +
> +       msrs->entry_ctls_high = vmcs_conf->vmentry_ctrl;
>         msrs->entry_ctls_high &=
>  #ifdef CONFIG_X86_64
>                 VM_ENTRY_IA32E_MODE |
> @@ -6637,11 +6635,10 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
>         msrs->entry_ctls_low &= ~VM_ENTRY_LOAD_DEBUG_CONTROLS;
>  
>         /* cpu-based controls */
> -       rdmsr(MSR_IA32_VMX_PROCBASED_CTLS,
> -               msrs->procbased_ctls_low,
> -               msrs->procbased_ctls_high);
>         msrs->procbased_ctls_low =
>                 CPU_BASED_ALWAYSON_WITHOUT_TRUE_MSR;
> +
> +       msrs->procbased_ctls_high = vmcs_conf->cpu_based_exec_ctrl;
>         msrs->procbased_ctls_high &=
>                 CPU_BASED_INTR_WINDOW_EXITING |
>                 CPU_BASED_NMI_WINDOW_EXITING | CPU_BASED_USE_TSC_OFFSETTING |
> @@ -6675,12 +6672,9 @@ void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps)
>          * depend on CPUID bits, they are added later by
>          * vmx_vcpu_after_set_cpuid.
>          */
> -       if (msrs->procbased_ctls_high & CPU_BASED_ACTIVATE_SECONDARY_CONTROLS)
> -               rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
> -                     msrs->secondary_ctls_low,
> -                     msrs->secondary_ctls_high);
> -
>         msrs->secondary_ctls_low = 0;
> +
> +       msrs->secondary_ctls_high = vmcs_conf->cpu_based_2nd_exec_ctrl;
>         msrs->secondary_ctls_high &=
>                 SECONDARY_EXEC_DESC |
>                 SECONDARY_EXEC_ENABLE_RDTSCP |
> diff --git a/arch/x86/kvm/vmx/nested.h b/arch/x86/kvm/vmx/nested.h
> index c92cea0b8ccc..fae047c6204b 100644
> --- a/arch/x86/kvm/vmx/nested.h
> +++ b/arch/x86/kvm/vmx/nested.h
> @@ -17,7 +17,7 @@ enum nvmx_vmentry_status {
>  };
>  
>  void vmx_leave_nested(struct kvm_vcpu *vcpu);
> -void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, u32 ept_caps);
> +void nested_vmx_setup_ctls_msrs(struct vmcs_config *vmcs_conf, u32 ept_caps);
>  void nested_vmx_hardware_unsetup(void);
>  __init int nested_vmx_hardware_setup(int (*exit_handlers[])(struct kvm_vcpu *));
>  void nested_vmx_set_vmcs_shadowing_bitmap(void);
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index e462e5b9c0a1..35285109856f 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -7306,7 +7306,7 @@ static int __init vmx_check_processor_compat(void)
>         if (setup_vmcs_config(&vmcs_conf, &vmx_cap) < 0)
>                 return -EIO;
>         if (nested)
> -               nested_vmx_setup_ctls_msrs(&vmcs_conf.nested, vmx_cap.ept);
> +               nested_vmx_setup_ctls_msrs(&vmcs_conf, vmx_cap.ept);
>         if (memcmp(&vmcs_config, &vmcs_conf, sizeof(struct vmcs_config)) != 0) {
>                 printk(KERN_ERR "kvm: CPU %d feature inconsistency!\n",
>                                 smp_processor_id());
> @@ -8281,8 +8281,7 @@ static __init int hardware_setup(void)
>         setup_default_sgx_lepubkeyhash();
>  
>         if (nested) {
> -               nested_vmx_setup_ctls_msrs(&vmcs_config.nested,
> -                                          vmx_capability.ept);
> +               nested_vmx_setup_ctls_msrs(&vmcs_config, vmx_capability.ept);
>  
>                 r = nested_vmx_hardware_setup(kvm_vmx_exit_handlers);
>                 if (r)


Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>

Best regards,
	Maxim Levitsky


  reply	other threads:[~2022-07-12 12:11 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-08 14:41 [PATCH v3 00/25] KVM: VMX: Support updated eVMCSv1 revision + use vmcs_config for L1 VMX MSRs Vitaly Kuznetsov
2022-07-08 14:41 ` [PATCH v3 01/25] KVM: x86: hyper-v: Expose access to debug MSRs in the partition privilege flags Vitaly Kuznetsov
2022-07-12 11:49   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 02/25] x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vitaly Kuznetsov
2022-07-08 14:42 ` [PATCH v3 03/25] x86/hyperv: Update " Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-12 12:19     ` Vitaly Kuznetsov
2022-07-08 14:42 ` [PATCH v3 04/25] KVM: VMX: Define VMCS-to-EVMCS conversion for the new fields Vitaly Kuznetsov
2022-07-12 11:50   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 05/25] KVM: nVMX: Support several new fields in eVMCSv1 Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 06/25] KVM: x86: hyper-v: Cache HYPERV_CPUID_NESTED_FEATURES CPUID leaf Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-13 15:45     ` Vitaly Kuznetsov
2022-07-08 14:42 ` [PATCH v3 07/25] KVM: selftests: Add ENCLS_EXITING_BITMAP{,HIGH} VMCS fields Vitaly Kuznetsov
2022-07-12 11:51   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 08/25] KVM: selftests: Switch to updated eVMCSv1 definition Vitaly Kuznetsov
2022-07-12 11:52   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 09/25] KVM: VMX: nVMX: Support TSC scaling and PERF_GLOBAL_CTRL with enlightened VMCS Vitaly Kuznetsov
2022-07-12 11:53   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 10/25] KVM: selftests: Enable TSC scaling in evmcs selftest Vitaly Kuznetsov
2022-07-12 11:54   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 11/25] KVM: VMX: Get rid of eVMCS specific VMX controls sanitization Vitaly Kuznetsov
2022-07-12 11:54   ` Maxim Levitsky
2022-07-12 12:14     ` Vitaly Kuznetsov
2022-07-12 12:16       ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 12/25] KVM: VMX: Check VM_ENTRY_IA32E_MODE in setup_vmcs_config() Vitaly Kuznetsov
2022-07-12 11:55   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 13/25] KVM: VMX: Check CPU_BASED_{INTR,NMI}_WINDOW_EXITING " Vitaly Kuznetsov
2022-07-12 11:55   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 14/25] KVM: VMX: Tweak the special handling of SECONDARY_EXEC_ENCLS_EXITING " Vitaly Kuznetsov
2022-07-12 11:56   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 15/25] KVM: VMX: Extend VMX controls macro shenanigans Vitaly Kuznetsov
2022-07-12 11:56   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 16/25] KVM: VMX: Move CPU_BASED_CR8_{LOAD,STORE}_EXITING filtering out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-12 11:56   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 17/25] KVM: VMX: Add missing VMEXIT controls to vmcs_config Vitaly Kuznetsov
2022-07-12 11:57   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 18/25] KVM: VMX: Add missing CPU based VM execution " Vitaly Kuznetsov
2022-07-12 11:57   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 19/25] KVM: VMX: Adjust CR3/INVPLG interception for EPT=y at runtime, not setup Vitaly Kuznetsov
2022-07-12 11:58   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 20/25] KVM: x86: VMX: Replace some Intel model numbers with mnemonics Vitaly Kuznetsov
2022-07-12 11:58   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 21/25] KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config() Vitaly Kuznetsov
2022-07-12 11:59   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 22/25] KVM: nVMX: Always set required-1 bits of pinbased_ctls to PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR Vitaly Kuznetsov
2022-07-12 12:02   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 23/25] KVM: nVMX: Use sanitized allowed-1 bits for VMX control MSRs Vitaly Kuznetsov
2022-07-12 12:11   ` Maxim Levitsky [this message]
2022-07-08 14:42 ` [PATCH v3 24/25] KVM: VMX: Cache MSR_IA32_VMX_MISC in vmcs_config Vitaly Kuznetsov
2022-07-12 12:11   ` Maxim Levitsky
2022-07-08 14:42 ` [PATCH v3 25/25] KVM: nVMX: Use cached host MSR_IA32_VMX_MISC value for setting up nested MSR Vitaly Kuznetsov
2022-07-12 12:11   ` Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b9523b41105fb3405f770b428921bfc932ad6fef.camel@redhat.com \
    --to=mlevitsk@redhat.com \
    --cc=anrayabh@linux.microsoft.com \
    --cc=jmattson@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=seanjc@google.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®