[PATCH v2 1/5] ASoC: mchp-spdifrx: disable end of block interrupt on failures

[Claudiu Beznea <claudiu.beznea@microchip.com>]

Disable end of block interrupt in case of wait for completion timeout
or errors to undo previously enable operation (done in
mchp_spdifrx_isr_blockend_en()). Otherwise we can end up with an
unbalanced reference counter for this interrupt.

Fixes: ef265c55c1ac ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 sound/soc/atmel/mchp-spdifrx.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/sound/soc/atmel/mchp-spdifrx.c b/sound/soc/atmel/mchp-spdifrx.c
index 0d37b78b94a0..b6a753893d90 100644
--- a/sound/soc/atmel/mchp-spdifrx.c
+++ b/sound/soc/atmel/mchp-spdifrx.c
@@ -288,15 +288,17 @@ static void mchp_spdifrx_isr_blockend_en(struct mchp_spdifrx_dev *dev)
 	spin_unlock_irqrestore(&dev->blockend_lock, flags);
 }
 
-/* called from atomic context only */
+/* called from atomic/non-atomic context */
 static void mchp_spdifrx_isr_blockend_dis(struct mchp_spdifrx_dev *dev)
 {
-	spin_lock(&dev->blockend_lock);
+	unsigned int flags;
+
+	spin_lock_irqsave(&dev->blockend_lock);
 	dev->blockend_refcount--;
 	/* don't enable BLOCKEND interrupt if it's already enabled */
 	if (dev->blockend_refcount == 0)
 		regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_BLOCKEND);
-	spin_unlock(&dev->blockend_lock);
+	spin_unlock_irqrestore(&dev->blockend_lock);
 }
 
 static irqreturn_t mchp_spdif_interrupt(int irq, void *dev_id)
@@ -575,6 +577,7 @@ static int mchp_spdifrx_subcode_ch_get(struct mchp_spdifrx_dev *dev,
 	if (ret <= 0) {
 		dev_dbg(dev->dev, "user data for channel %d timeout\n",
 			channel);
+		mchp_spdifrx_isr_blockend_dis(dev);
 		return ret;
 	}
 
-- 
2.34.1