From: Marco Felsch <m.felsch@pengutronix.de>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
laurent.pinchart+renesas@ideasonboard.com,
jacopo+renesas@jmondi.org, akinobu.mita@gmail.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel@pengutronix.de
Subject: [PATCH 1/4] media: mt9m111: add V4L2_CID_PIXEL_RATE support
Date: Thu, 18 Aug 2022 16:47:09 +0200 [thread overview]
Message-ID: <20220818144712.997477-1-m.felsch@pengutronix.de> (raw)
Add support to report the PIXEL_RATE so a host or bridge device can ask
the sensor.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
drivers/media/i2c/mt9m111.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index afc86efa9e3e..cdaf283e1309 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -908,6 +908,8 @@ static int mt9m111_s_ctrl(struct v4l2_ctrl *ctrl)
return mt9m111_set_test_pattern(mt9m111, ctrl->val);
case V4L2_CID_COLORFX:
return mt9m111_set_colorfx(mt9m111, ctrl->val);
+ case V4L2_CID_PIXEL_RATE:
+ return 0;
}
return -EINVAL;
@@ -1249,6 +1251,7 @@ static int mt9m111_probe(struct i2c_client *client)
{
struct mt9m111 *mt9m111;
struct i2c_adapter *adapter = client->adapter;
+ unsigned long mclk_rate;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
@@ -1271,6 +1274,13 @@ static int mt9m111_probe(struct i2c_client *client)
if (IS_ERR(mt9m111->clk))
return PTR_ERR(mt9m111->clk);
+ ret = clk_prepare_enable(mt9m111->clk);
+ if (ret < 0)
+ return ret;
+
+ mclk_rate = clk_get_rate(mt9m111->clk);
+ clk_disable_unprepare(mt9m111->clk);
+
mt9m111->regulator = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(mt9m111->regulator)) {
dev_err(&client->dev, "regulator not found: %ld\n",
@@ -1285,7 +1295,7 @@ static int mt9m111_probe(struct i2c_client *client)
mt9m111->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
- v4l2_ctrl_handler_init(&mt9m111->hdl, 7);
+ v4l2_ctrl_handler_init(&mt9m111->hdl, 8);
v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops,
@@ -1309,6 +1319,9 @@ static int mt9m111_probe(struct i2c_client *client)
BIT(V4L2_COLORFX_NEGATIVE) |
BIT(V4L2_COLORFX_SOLARIZATION)),
V4L2_COLORFX_NONE);
+ v4l2_ctrl_new_std(&mt9m111->hdl, &mt9m111_ctrl_ops, V4L2_CID_PIXEL_RATE,
+ mclk_rate, mclk_rate, 1, mclk_rate);
+
mt9m111->subdev.ctrl_handler = &mt9m111->hdl;
if (mt9m111->hdl.error) {
ret = mt9m111->hdl.error;
--
2.30.2
next reply other threads:[~2022-08-18 14:47 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-18 14:47 Marco Felsch [this message]
2022-08-18 14:47 ` [PATCH 2/4] media: mt9m111: fix subdev API usage Marco Felsch
2022-08-19 7:16 ` Jacopo Mondi
2022-08-19 7:28 ` Marco Felsch
2022-08-19 7:40 ` Jacopo Mondi
2022-08-22 6:28 ` Sakari Ailus
2022-08-22 7:51 ` Marco Felsch
2022-08-22 9:17 ` Sakari Ailus
2022-08-18 14:47 ` [PATCH 3/4] media: mt9m111: fix device power usage Marco Felsch
2022-08-19 7:26 ` Jacopo Mondi
2022-08-19 7:32 ` Marco Felsch
2022-08-22 6:31 ` Sakari Ailus
2022-08-22 7:54 ` Marco Felsch
2022-08-22 9:18 ` Sakari Ailus
2022-08-23 14:44 ` Marco Felsch
2023-01-16 22:14 ` Sakari Ailus
2023-01-17 11:29 ` Marco Felsch
2023-01-17 11:32 ` Sakari Ailus
2022-08-18 14:47 ` [PATCH 4/4] media: mt9m111: remove .s_power callback Marco Felsch
2022-08-18 16:14 ` Jacopo Mondi
2022-08-19 7:18 ` Marco Felsch
2022-08-19 7:35 ` Jacopo Mondi
2022-08-19 8:06 ` Marco Felsch
2022-08-19 8:17 ` Jacopo Mondi
2022-08-18 16:11 ` [PATCH 1/4] media: mt9m111: add V4L2_CID_PIXEL_RATE support Jacopo Mondi
2022-08-19 7:56 ` Marco Felsch
2022-08-19 8:15 ` Jacopo Mondi
2022-08-19 9:04 ` Marco Felsch
2022-08-19 9:46 ` Jacopo Mondi
2022-08-19 10:06 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220818144712.997477-1-m.felsch@pengutronix.de \
--to=m.felsch@pengutronix.de \
--cc=akinobu.mita@gmail.com \
--cc=jacopo+renesas@jmondi.org \
--cc=kernel@pengutronix.de \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®