[PATCH v3 1/2] misc: pci_endpoint_test: Aggregate params checking for xfer

[PATCH v3 1/2] misc: pci_endpoint_test: Aggregate params checking for xfer

[Shunsuke Mie]

Each transfer test functions have same parameter checking code. This patch
unites those to an introduced function.

Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
---
Changes in v3:
* Remove duplicated logging and change to use dev_dbg().

Changes in v2:
* New patch
---
---
 drivers/misc/pci_endpoint_test.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 8f786a225dcf..39d477bb0989 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -332,6 +332,17 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
 	return false;
 }
 
+static int pci_endpoint_test_validate_xfer_params(struct device *dev,
+		struct pci_endpoint_test_xfer_param *param, size_t alignment)
+{
+	if (param->size > SIZE_MAX - alignment) {
+		dev_dbg(dev, "Maximum transfer data size exceeded\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 				   unsigned long arg)
 {
@@ -363,9 +374,11 @@ static bool pci_endpoint_test_copy(struct pci_endpoint_test *test,
 		return false;
 	}
 
+	err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+	if (err)
+		return false;
+
 	size = param.size;
-	if (size > SIZE_MAX - alignment)
-		goto err;
 
 	use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
 	if (use_dma)
@@ -497,9 +510,11 @@ static bool pci_endpoint_test_write(struct pci_endpoint_test *test,
 		return false;
 	}
 
+	err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+	if (err)
+		return false;
+
 	size = param.size;
-	if (size > SIZE_MAX - alignment)
-		goto err;
 
 	use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
 	if (use_dma)
@@ -595,9 +610,11 @@ static bool pci_endpoint_test_read(struct pci_endpoint_test *test,
 		return false;
 	}
 
+	err = pci_endpoint_test_validate_xfer_params(dev, &param, alignment);
+	if (err)
+		return false;
+
 	size = param.size;
-	if (size > SIZE_MAX - alignment)
-		goto err;
 
 	use_dma = !!(param.flags & PCITEST_FLAGS_USE_DMA);
 	if (use_dma)
-- 
2.17.1

[PATCH v3 2/2] misc: pci_endpoint_test: Fix pci_endpoint_test_{copy,write,read}() panic

[Shunsuke Mie]

The dma_map_single() doesn't permit zero length mapping. It causes a follow
panic.

A panic was reported on arm64:

[   60.137988] ------------[ cut here ]------------
[   60.142630] kernel BUG at kernel/dma/swiotlb.c:624!
[   60.147508] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[   60.152992] Modules linked in: dw_hdmi_cec crct10dif_ce simple_bridge rcar_fdp1 vsp1 rcar_vin videobuf2_vmalloc rcar_csi2 v4l
2_mem2mem videobuf2_dma_contig videobuf2_memops pci_endpoint_test videobuf2_v4l2 videobuf2_common rcar_fcp v4l2_fwnode v4l2_asyn
c videodev mc gpio_bd9571mwv max9611 pwm_rcar ccree at24 authenc libdes phy_rcar_gen3_usb3 usb_dmac display_connector pwm_bl
[   60.186252] CPU: 0 PID: 508 Comm: pcitest Not tainted 6.0.0-rc1rpci-dev+ #237
[   60.193387] Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT)
[   60.201302] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   60.208263] pc : swiotlb_tbl_map_single+0x2c0/0x590
[   60.213149] lr : swiotlb_map+0x88/0x1f0
[   60.216982] sp : ffff80000a883bc0
[   60.220292] x29: ffff80000a883bc0 x28: 0000000000000000 x27: 0000000000000000
[   60.227430] x26: 0000000000000000 x25: ffff0004c0da20d0 x24: ffff80000a1f77c0
[   60.234567] x23: 0000000000000002 x22: 0001000040000010 x21: 000000007a000000
[   60.241703] x20: 0000000000200000 x19: 0000000000000000 x18: 0000000000000000
[   60.248840] x17: 0000000000000000 x16: 0000000000000000 x15: ffff0006ff7b9180
[   60.255977] x14: ffff0006ff7b9180 x13: 0000000000000000 x12: 0000000000000000
[   60.263113] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
[   60.270249] x8 : 0001000000000010 x7 : ffff0004c6754b20 x6 : 0000000000000000
[   60.277385] x5 : ffff0004c0da2090 x4 : 0000000000000000 x3 : 0000000000000001
[   60.284521] x2 : 0000000040000000 x1 : 0000000000000000 x0 : 0000000040000010
[   60.291658] Call trace:
[   60.294100]  swiotlb_tbl_map_single+0x2c0/0x590
[   60.298629]  swiotlb_map+0x88/0x1f0
[   60.302115]  dma_map_page_attrs+0x188/0x230
[   60.306299]  pci_endpoint_test_ioctl+0x5e4/0xd90 [pci_endpoint_test]
[   60.312660]  __arm64_sys_ioctl+0xa8/0xf0
[   60.316583]  invoke_syscall+0x44/0x108
[   60.320334]  el0_svc_common.constprop.0+0xcc/0xf0
[   60.325038]  do_el0_svc+0x2c/0xb8
[   60.328351]  el0_svc+0x2c/0x88
[   60.331406]  el0t_64_sync_handler+0xb8/0xc0
[   60.335587]  el0t_64_sync+0x18c/0x190
[   60.339251] Code: 52800013 d2e00414 35fff45c d503201f (d4210000)
[   60.345344] ---[ end trace 0000000000000000 ]---

To fix it, this patch adds a checking the payload length if it is zero.

Fixes: 343dc693f7b7 ("misc: pci_endpoint_test: Prevent some integer overflows")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
---
Changes in v3:
* Change to use dev_dbg() instead of the dev_err().

Changes in v2:
* Move a checking code to an introduced function in previous patch.
---
---
 drivers/misc/pci_endpoint_test.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index 39d477bb0989..11530b4ec389 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -335,6 +335,11 @@ static bool pci_endpoint_test_msi_irq(struct pci_endpoint_test *test,
 static int pci_endpoint_test_validate_xfer_params(struct device *dev,
 		struct pci_endpoint_test_xfer_param *param, size_t alignment)
 {
+	if (!param->size) {
+		dev_dbg(dev, "Data size is zero\n");
+		return -EINVAL;
+	}
+
 	if (param->size > SIZE_MAX - alignment) {
 		dev_dbg(dev, "Maximum transfer data size exceeded\n");
 		return -EINVAL;
-- 
2.17.1