[PATCH 1/3] media: s5p-mfc: Fix in register read and write for H264

[PATCH 1/3] media: s5p-mfc: Fix in register read and write for H264

[Smitha T Murthy]

Few of the H264 encoder registers written were not getting reflected
since the read values was not stored and getting overwritten.

Fixes: 6a9c6f6812579 ("[media] s5p-mfc: Add variants to access mfc registers")

Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
---
 .../platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c      | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
index 8227004f6746..c0df5ac9fcff 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_opr_v6.c
@@ -1060,7 +1060,7 @@ static int s5p_mfc_set_enc_params_h264(struct s5p_mfc_ctx *ctx)
 	}
 
 	/* aspect ratio VUI */
-	readl(mfc_regs->e_h264_options);
+	reg = readl(mfc_regs->e_h264_options);
 	reg &= ~(0x1 << 5);
 	reg |= ((p_h264->vui_sar & 0x1) << 5);
 	writel(reg, mfc_regs->e_h264_options);
@@ -1083,7 +1083,7 @@ static int s5p_mfc_set_enc_params_h264(struct s5p_mfc_ctx *ctx)
 
 	/* intra picture period for H.264 open GOP */
 	/* control */
-	readl(mfc_regs->e_h264_options);
+	reg = readl(mfc_regs->e_h264_options);
 	reg &= ~(0x1 << 4);
 	reg |= ((p_h264->open_gop & 0x1) << 4);
 	writel(reg, mfc_regs->e_h264_options);
@@ -1097,23 +1097,23 @@ static int s5p_mfc_set_enc_params_h264(struct s5p_mfc_ctx *ctx)
 	}
 
 	/* 'WEIGHTED_BI_PREDICTION' for B is disable */
-	readl(mfc_regs->e_h264_options);
+	reg = readl(mfc_regs->e_h264_options);
 	reg &= ~(0x3 << 9);
 	writel(reg, mfc_regs->e_h264_options);
 
 	/* 'CONSTRAINED_INTRA_PRED_ENABLE' is disable */
-	readl(mfc_regs->e_h264_options);
+	reg = readl(mfc_regs->e_h264_options);
 	reg &= ~(0x1 << 14);
 	writel(reg, mfc_regs->e_h264_options);
 
 	/* ASO */
-	readl(mfc_regs->e_h264_options);
+	reg = readl(mfc_regs->e_h264_options);
 	reg &= ~(0x1 << 6);
 	reg |= ((p_h264->aso & 0x1) << 6);
 	writel(reg, mfc_regs->e_h264_options);
 
 	/* hier qp enable */
-	readl(mfc_regs->e_h264_options);
+	reg = readl(mfc_regs->e_h264_options);
 	reg &= ~(0x1 << 8);
 	reg |= ((p_h264->open_gop & 0x1) << 8);
 	writel(reg, mfc_regs->e_h264_options);
@@ -1134,7 +1134,7 @@ static int s5p_mfc_set_enc_params_h264(struct s5p_mfc_ctx *ctx)
 	writel(reg, mfc_regs->e_h264_num_t_layer);
 
 	/* frame packing SEI generation */
-	readl(mfc_regs->e_h264_options);
+	reg = readl(mfc_regs->e_h264_options);
 	reg &= ~(0x1 << 25);
 	reg |= ((p_h264->sei_frame_packing & 0x1) << 25);
 	writel(reg, mfc_regs->e_h264_options);
-- 
2.17.1

[PATCH 2/3] media: s5p-mfc: Clear workbit to handle error condition

[Smitha T Murthy]

During error on CLOSE_INSTANCE command, ctx_work_bits was not getting cleared.
During consequent mfc execution NULL pointer dereferencing of this context led
to kernel panic. This patch fixes this issue by making sure to clear
ctx_work_bits always.

Fixes: 818cd91ab8c6e ("[media] s5p-mfc: Extract open/close MFC instance commands)

Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
---
 drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
index 72d70984e99a..6d3c92045c05 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_ctrl.c
@@ -468,8 +468,10 @@ void s5p_mfc_close_mfc_inst(struct s5p_mfc_dev *dev, struct s5p_mfc_ctx *ctx)
 	s5p_mfc_hw_call(dev->mfc_ops, try_run, dev);
 	/* Wait until instance is returned or timeout occurred */
 	if (s5p_mfc_wait_for_done_ctx(ctx,
-				S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0))
+				S5P_MFC_R2H_CMD_CLOSE_INSTANCE_RET, 0)){
+		clear_work_bit_irqsave(ctx);
 		mfc_err("Err returning instance\n");
+	}
 
 	/* Free resources */
 	s5p_mfc_hw_call(dev->mfc_ops, release_codec_buffers, ctx);
-- 
2.17.1

[PATCH 3/3] media: s5p-mfc: Fix to handle reference queue during finishing

[Smitha T Murthy]

On receiving last buffer driver puts MFC to MFCINST_FINISHING state which in
turn skips transferring of frame from SRC to REF queue. This causes driver to
stop MFC encoding and last frame is lost.

This patch guarantees safe handling of frames during MFCINST_FINISHING and
correct clearing of workbit to avoid early stopping of encoding.

Fixes: af93574678108 ("[media] MFC: Add MFC 5.1 V4L2 driver")

Cc: stable@vger.kernel.org
Cc: linux-fsd@tesla.com
Signed-off-by: Smitha T Murthy <smitha.t@samsung.com>
---
 drivers/media/platform/samsung/s5p-mfc/s5p_mfc_enc.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_enc.c
index b65e506665af..e064bdd74f2e 100644
--- a/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/platform/samsung/s5p-mfc/s5p_mfc_enc.c
@@ -1218,6 +1218,7 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx)
 	unsigned long mb_y_addr, mb_c_addr;
 	int slice_type;
 	unsigned int strm_size;
+	bool src_ready;
 
 	slice_type = s5p_mfc_hw_call(dev->mfc_ops, get_enc_slice_type, dev);
 	strm_size = s5p_mfc_hw_call(dev->mfc_ops, get_enc_strm_size, dev);
@@ -1257,7 +1258,8 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx)
 			}
 		}
 	}
-	if ((ctx->src_queue_cnt > 0) && (ctx->state == MFCINST_RUNNING)) {
+	if ((ctx->src_queue_cnt > 0) && (ctx->state == MFCINST_RUNNING ||
+				ctx->state == MFCINST_FINISHING)) {
 		mb_entry = list_entry(ctx->src_queue.next, struct s5p_mfc_buf,
 									list);
 		if (mb_entry->flags & MFC_BUF_FLAG_USED) {
@@ -1288,7 +1290,13 @@ static int enc_post_frame_start(struct s5p_mfc_ctx *ctx)
 		vb2_set_plane_payload(&mb_entry->b->vb2_buf, 0, strm_size);
 		vb2_buffer_done(&mb_entry->b->vb2_buf, VB2_BUF_STATE_DONE);
 	}
-	if ((ctx->src_queue_cnt == 0) || (ctx->dst_queue_cnt == 0))
+
+	src_ready = true;
+	if ((ctx->state == MFCINST_RUNNING) && (ctx->src_queue_cnt == 0))
+		src_ready = false;
+	if ((ctx->state == MFCINST_FINISHING) && (ctx->ref_queue_cnt == 0))
+		src_ready = false;
+	if ((!src_ready) || (ctx->dst_queue_cnt == 0))
 		clear_work_bit(ctx);
 
 	return 0;
-- 
2.17.1