From: Takashi Iwai <tiwai@suse.de>
To: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 07/12] drm/udl: Drop unneeded alignment
Date: Thu, 8 Sep 2022 11:51:10 +0200 [thread overview]
Message-ID: <20220908095115.23396-8-tiwai@suse.de> (raw)
In-Reply-To: <20220908095115.23396-1-tiwai@suse.de>
The alignment of damaged area was needed for the original udlfb driver
that tried to trim the superfluous copies between front and backend
buffers and handle data in long int. It's not the case for udl DRM
driver, hence we can omit the whole unneeded alignment, as well as the
dead code.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
drivers/gpu/drm/udl/udl_modeset.c | 28 +--------------------
drivers/gpu/drm/udl/udl_transfer.c | 40 ------------------------------
2 files changed, 1 insertion(+), 67 deletions(-)
diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c
index cbdda2d8b882..c9b837ac26a7 100644
--- a/drivers/gpu/drm/udl/udl_modeset.c
+++ b/drivers/gpu/drm/udl/udl_modeset.c
@@ -242,28 +242,6 @@ static long udl_log_cpp(unsigned int cpp)
return __ffs(cpp);
}
-static int udl_aligned_damage_clip(struct drm_rect *clip, int x, int y,
- int width, int height)
-{
- int x1, x2;
-
- if (WARN_ON_ONCE(x < 0) ||
- WARN_ON_ONCE(y < 0) ||
- WARN_ON_ONCE(width < 0) ||
- WARN_ON_ONCE(height < 0))
- return -EINVAL;
-
- x1 = ALIGN_DOWN(x, sizeof(unsigned long));
- x2 = ALIGN(width + (x - x1), sizeof(unsigned long)) + x1;
-
- clip->x1 = x1;
- clip->y1 = y;
- clip->x2 = x2;
- clip->y2 = y + height;
-
- return 0;
-}
-
static int udl_handle_damage(struct drm_framebuffer *fb,
const struct iosys_map *map,
int x, int y, int width, int height)
@@ -281,11 +259,7 @@ static int udl_handle_damage(struct drm_framebuffer *fb,
return ret;
log_bpp = ret;
- ret = udl_aligned_damage_clip(&clip, x, y, width, height);
- if (ret)
- return ret;
- else if ((clip.x2 > fb->width) || (clip.y2 > fb->height))
- return -EINVAL;
+ drm_rect_init(&clip, x, y, width, height);
ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
if (ret)
diff --git a/drivers/gpu/drm/udl/udl_transfer.c b/drivers/gpu/drm/udl/udl_transfer.c
index 176ef2a6a731..a431208dda85 100644
--- a/drivers/gpu/drm/udl/udl_transfer.c
+++ b/drivers/gpu/drm/udl/udl_transfer.c
@@ -25,46 +25,6 @@
#define MIN_RAW_PIX_BYTES 2
#define MIN_RAW_CMD_BYTES (RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
-/*
- * Trims identical data from front and back of line
- * Sets new front buffer address and width
- * And returns byte count of identical pixels
- * Assumes CPU natural alignment (unsigned long)
- * for back and front buffer ptrs and width
- */
-#if 0
-static int udl_trim_hline(const u8 *bback, const u8 **bfront, int *width_bytes)
-{
- int j, k;
- const unsigned long *back = (const unsigned long *) bback;
- const unsigned long *front = (const unsigned long *) *bfront;
- const int width = *width_bytes / sizeof(unsigned long);
- int identical = width;
- int start = width;
- int end = width;
-
- for (j = 0; j < width; j++) {
- if (back[j] != front[j]) {
- start = j;
- break;
- }
- }
-
- for (k = width - 1; k > j; k--) {
- if (back[k] != front[k]) {
- end = k+1;
- break;
- }
- }
-
- identical = start + (width - end);
- *bfront = (u8 *) &front[start];
- *width_bytes = (end - start) * sizeof(unsigned long);
-
- return identical * sizeof(unsigned long);
-}
-#endif
-
static inline u16 pixel32_to_be16(const uint32_t pixel)
{
return (((pixel >> 3) & 0x001f) |
--
2.35.3
next prev parent reply other threads:[~2022-09-08 9:51 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 9:51 [PATCH v3 00/12] drm/udl: More fixes Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 01/12] drm/udl: Restore display mode on resume Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 02/12] drm/udl: Add reset_resume Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 03/12] drm/udl: Enable damage clipping Takashi Iwai
2022-09-08 13:09 ` Thomas Zimmermann
2022-09-08 9:51 ` [PATCH v3 04/12] Revert "drm/udl: Kill pending URBs at suspend and disconnect" Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 05/12] drm/udl: Suppress error print for -EPROTO at URB completion Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 06/12] drm/udl: Increase the default URB list size to 20 Takashi Iwai
2022-09-08 9:51 ` Takashi Iwai [this message]
2022-09-08 9:51 ` [PATCH v3 08/12] drm/udl: Pass rectangle directly to udl_handle_damage() Takashi Iwai
2022-09-08 12:47 ` Thomas Zimmermann
2022-09-08 12:54 ` Takashi Iwai
2022-09-08 13:07 ` Thomas Zimmermann
2022-09-08 9:51 ` [PATCH v3 09/12] drm/udl: Fix potential URB leaks Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 10/12] drm/udl: Fix inconsistent urbs.count value during udl_free_urb_list() Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 11/12] drm/udl: Don't re-initialize stuff at retrying the URB list allocation Takashi Iwai
2022-09-08 9:51 ` [PATCH v3 12/12] drm/udl: Sync pending URBs at the end of suspend Takashi Iwai
2022-09-12 7:06 ` [PATCH v3 00/12] drm/udl: More fixes Thomas Zimmermann
2022-09-12 11:51 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220908095115.23396-8-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=daniel.vetter@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®