mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 08/12] drm/udl: Pass rectangle directly to udl_handle_damage()
Date: Thu,  8 Sep 2022 11:51:11 +0200	[thread overview]
Message-ID: <20220908095115.23396-9-tiwai@suse.de> (raw)
In-Reply-To: <20220908095115.23396-1-tiwai@suse.de>

Just for some code simplification.

Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 drivers/gpu/drm/udl/udl_modeset.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c
index c9b837ac26a7..0142fc6a478a 100644
--- a/drivers/gpu/drm/udl/udl_modeset.c
+++ b/drivers/gpu/drm/udl/udl_modeset.c
@@ -244,14 +244,13 @@ static long udl_log_cpp(unsigned int cpp)
 
 static int udl_handle_damage(struct drm_framebuffer *fb,
 			     const struct iosys_map *map,
-			     int x, int y, int width, int height)
+			     struct drm_rect *clip)
 {
 	struct drm_device *dev = fb->dev;
 	void *vaddr = map->vaddr; /* TODO: Use mapping abstraction properly */
 	int i, ret;
 	char *cmd;
 	struct urb *urb;
-	struct drm_rect clip;
 	int log_bpp;
 
 	ret = udl_log_cpp(fb->format->cpp[0]);
@@ -259,8 +258,6 @@ static int udl_handle_damage(struct drm_framebuffer *fb,
 		return ret;
 	log_bpp = ret;
 
-	drm_rect_init(&clip, x, y, width, height);
-
 	ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
 	if (ret)
 		return ret;
@@ -272,11 +269,11 @@ static int udl_handle_damage(struct drm_framebuffer *fb,
 	}
 	cmd = urb->transfer_buffer;
 
-	for (i = clip.y1; i < clip.y2; i++) {
+	for (i = clip->y1; i < clip->y2; i++) {
 		const int line_offset = fb->pitches[0] * i;
-		const int byte_offset = line_offset + (clip.x1 << log_bpp);
-		const int dev_byte_offset = (fb->width * i + clip.x1) << log_bpp;
-		const int byte_width = (clip.x2 - clip.x1) << log_bpp;
+		const int byte_offset = line_offset + (clip->x1 << log_bpp);
+		const int dev_byte_offset = (fb->width * i + clip->x1) << log_bpp;
+		const int byte_width = (clip->x2 - clip->x1) << log_bpp;
 		ret = udl_render_hline(dev, log_bpp, &urb, (char *)vaddr,
 				       &cmd, byte_offset, dev_byte_offset,
 				       byte_width);
@@ -329,6 +326,7 @@ udl_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 	struct udl_device *udl = to_udl(dev);
 	struct drm_display_mode *mode = &crtc_state->mode;
 	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
+	struct drm_rect clip;
 	char *buf;
 	char *wrptr;
 	int color_depth = UDL_COLOR_DEPTH_16BPP;
@@ -354,7 +352,8 @@ udl_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
 
 	udl->mode_buf_len = wrptr - buf;
 
-	udl_handle_damage(fb, &shadow_plane_state->data[0], 0, 0, fb->width, fb->height);
+	drm_rect_init(&clip, 0, 0, fb->width, fb->height);
+	udl_handle_damage(fb, &shadow_plane_state->data[0], &clip);
 
 	/* enable display */
 	udl_crtc_write_mode_to_hw(crtc);
@@ -396,8 +395,7 @@ udl_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
 		return;
 
 	if (drm_atomic_helper_damage_merged(old_plane_state, state, &rect))
-		udl_handle_damage(fb, &shadow_plane_state->data[0], rect.x1, rect.y1,
-				  rect.x2 - rect.x1, rect.y2 - rect.y1);
+		udl_handle_damage(fb, &shadow_plane_state->data[0], &rect);
 }
 
 static const struct drm_simple_display_pipe_funcs udl_simple_display_pipe_funcs = {
-- 
2.35.3


  parent reply	other threads:[~2022-09-08  9:52 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-08  9:51 [PATCH v3 00/12] drm/udl: More fixes Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 01/12] drm/udl: Restore display mode on resume Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 02/12] drm/udl: Add reset_resume Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 03/12] drm/udl: Enable damage clipping Takashi Iwai
2022-09-08 13:09   ` Thomas Zimmermann
2022-09-08  9:51 ` [PATCH v3 04/12] Revert "drm/udl: Kill pending URBs at suspend and disconnect" Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 05/12] drm/udl: Suppress error print for -EPROTO at URB completion Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 06/12] drm/udl: Increase the default URB list size to 20 Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 07/12] drm/udl: Drop unneeded alignment Takashi Iwai
2022-09-08  9:51 ` Takashi Iwai [this message]
2022-09-08 12:47   ` [PATCH v3 08/12] drm/udl: Pass rectangle directly to udl_handle_damage() Thomas Zimmermann
2022-09-08 12:54     ` Takashi Iwai
2022-09-08 13:07       ` Thomas Zimmermann
2022-09-08  9:51 ` [PATCH v3 09/12] drm/udl: Fix potential URB leaks Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 10/12] drm/udl: Fix inconsistent urbs.count value during udl_free_urb_list() Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 11/12] drm/udl: Don't re-initialize stuff at retrying the URB list allocation Takashi Iwai
2022-09-08  9:51 ` [PATCH v3 12/12] drm/udl: Sync pending URBs at the end of suspend Takashi Iwai
2022-09-12  7:06 ` [PATCH v3 00/12] drm/udl: More fixes Thomas Zimmermann
2022-09-12 11:51   ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220908095115.23396-9-tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®