mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Pankaj Raghav <p.raghav@samsung.com>
To: hch@lst.de, agk@redhat.com, damien.lemoal@opensource.wdc.com,
	axboe@kernel.dk, snitzer@kernel.org
Cc: linux-kernel@vger.kernel.org, Johannes.Thumshirn@wdc.com,
	linux-nvme@lists.infradead.org, pankydev8@gmail.com,
	matias.bjorling@wdc.com, linux-block@vger.kernel.org,
	bvanassche@acm.org, gost.dev@samsung.com, dm-devel@redhat.com,
	hare@suse.de, jaegeuk@kernel.org,
	Pankaj Raghav <p.raghav@samsung.com>,
	Luis Chamberlain <mcgrof@kernel.org>
Subject: [PATCH v13 06/13] null_blk: allow zoned devices with non power-of-2 zone sizes
Date: Mon, 12 Sep 2022 10:21:57 +0200	[thread overview]
Message-ID: <20220912082204.51189-7-p.raghav@samsung.com> (raw)
In-Reply-To: <20220912082204.51189-1-p.raghav@samsung.com>

Convert the power-of-2(po2) based calculation with zone size to be generic
in null_zone_no with optimization for po2 zone sizes.

The nr_zones calculation in null_init_zoned_dev has been replaced with a
division without special handling for po2 zone sizes as this function is
called only during the initialization and will not be invoked in the hot
path.

Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
---
 drivers/block/null_blk/main.c     |  5 ++---
 drivers/block/null_blk/null_blk.h |  1 +
 drivers/block/null_blk/zoned.c    | 18 +++++++++++-------
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/block/null_blk/main.c b/drivers/block/null_blk/main.c
index 1f154f92f4c2..3b24125d8594 100644
--- a/drivers/block/null_blk/main.c
+++ b/drivers/block/null_blk/main.c
@@ -1976,9 +1976,8 @@ static int null_validate_conf(struct nullb_device *dev)
 	if (dev->queue_mode == NULL_Q_BIO)
 		dev->mbps = 0;
 
-	if (dev->zoned &&
-	    (!dev->zone_size || !is_power_of_2(dev->zone_size))) {
-		pr_err("zone_size must be power-of-two\n");
+	if (dev->zoned && !dev->zone_size) {
+		pr_err("Invalid zero zone size\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/block/null_blk/null_blk.h b/drivers/block/null_blk/null_blk.h
index 94ff68052b1e..f63b6bed1bb3 100644
--- a/drivers/block/null_blk/null_blk.h
+++ b/drivers/block/null_blk/null_blk.h
@@ -83,6 +83,7 @@ struct nullb_device {
 	unsigned int imp_close_zone_no;
 	struct nullb_zone *zones;
 	sector_t zone_size_sects;
+	unsigned int zone_size_sects_shift;
 	bool need_zone_res_mgmt;
 	spinlock_t zone_res_lock;
 
diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index 55a69e48ef8b..015f6823706c 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -16,7 +16,10 @@ static inline sector_t mb_to_sects(unsigned long mb)
 
 static inline unsigned int null_zone_no(struct nullb_device *dev, sector_t sect)
 {
-	return sect >> ilog2(dev->zone_size_sects);
+	if (dev->zone_size_sects_shift)
+		return sect >> dev->zone_size_sects_shift;
+
+	return div64_u64(sect, dev->zone_size_sects);
 }
 
 static inline void null_lock_zone_res(struct nullb_device *dev)
@@ -65,10 +68,6 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	sector_t sector = 0;
 	unsigned int i;
 
-	if (!is_power_of_2(dev->zone_size)) {
-		pr_err("zone_size must be power-of-two\n");
-		return -EINVAL;
-	}
 	if (dev->zone_size > dev->size) {
 		pr_err("Zone size larger than device capacity\n");
 		return -EINVAL;
@@ -86,9 +85,14 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 	zone_capacity_sects = mb_to_sects(dev->zone_capacity);
 	dev_capacity_sects = mb_to_sects(dev->size);
 	dev->zone_size_sects = mb_to_sects(dev->zone_size);
-	dev->nr_zones = round_up(dev_capacity_sects, dev->zone_size_sects)
-		>> ilog2(dev->zone_size_sects);
 
+	if (is_power_of_2(dev->zone_size_sects))
+		dev->zone_size_sects_shift = ilog2(dev->zone_size_sects);
+	else
+		dev->zone_size_sects_shift = 0;
+
+	dev->nr_zones =	DIV_ROUND_UP_SECTOR_T(dev_capacity_sects,
+					      dev->zone_size_sects);
 	dev->zones = kvmalloc_array(dev->nr_zones, sizeof(struct nullb_zone),
 				    GFP_KERNEL | __GFP_ZERO);
 	if (!dev->zones)
-- 
2.25.1


  parent reply	other threads:[~2022-09-12  8:23 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20220912082205eucas1p1e5fb1acfb0b2a2fe6261520ace90c883@eucas1p1.samsung.com>
2022-09-12  8:21 ` [PATCH v13 00/13] support zoned block devices with non-power-of-2 " Pankaj Raghav
     [not found]   ` <CGME20220912082206eucas1p25336d07279850f7009be6b5d1fccf558@eucas1p2.samsung.com>
2022-09-12  8:21     ` [PATCH v13 01/13] block: make bdev_nr_zones and disk_zone_no generic for npo2 zone size Pankaj Raghav
2022-09-12 10:03       ` Johannes Thumshirn
2022-09-14 17:19       ` Chaitanya Kulkarni
     [not found]   ` <CGME20220912082207eucas1p14b1bcefc6045a0a835e83db8ed810d5e@eucas1p1.samsung.com>
2022-09-12  8:21     ` [PATCH v13 02/13] block: rearrange bdev_{is_zoned,zone_sectors,get_queue} helper in blkdev.h Pankaj Raghav
2022-09-12 10:03       ` Johannes Thumshirn
2022-09-14 17:19       ` Chaitanya Kulkarni
     [not found]   ` <CGME20220912082209eucas1p2747fa09635df54a6c76821585776672f@eucas1p2.samsung.com>
2022-09-12  8:21     ` [PATCH v13 03/13] block: allow blk-zoned devices to have non-power-of-2 zone size Pankaj Raghav
2022-09-12 10:04       ` Johannes Thumshirn
     [not found]   ` <CGME20220912082210eucas1p2a27e358b12b0e4b06a7e00938251c90c@eucas1p2.samsung.com>
2022-09-12  8:21     ` [PATCH v13 04/13] nvmet: Allow ZNS target to support non-power_of_2 zone sizes Pankaj Raghav
2022-09-14 17:16       ` Chaitanya Kulkarni
     [not found]   ` <CGME20220912082211eucas1p2d7cbc34d8ba679e525442128698a1116@eucas1p2.samsung.com>
2022-09-12  8:21     ` [PATCH v13 05/13] nvme: zns: Allow ZNS drives that have non-power_of_2 zone size Pankaj Raghav
2022-09-14 17:16       ` Chaitanya Kulkarni
     [not found]   ` <CGME20220912082212eucas1p1032064dd2ac1638d7d18be7e6fe5344e@eucas1p1.samsung.com>
2022-09-12  8:21     ` Pankaj Raghav [this message]
2022-09-12 10:06       ` [PATCH v13 06/13] null_blk: allow zoned devices with non power-of-2 zone sizes Johannes Thumshirn
2022-09-14 17:17       ` Chaitanya Kulkarni
     [not found]   ` <CGME20220912082213eucas1p239d6095dab9b042f05efd3a6e82bac9c@eucas1p2.samsung.com>
2022-09-12  8:21     ` [PATCH v13 07/13] zonefs: allow non power of 2 zoned devices Pankaj Raghav
2022-09-12 10:07       ` Johannes Thumshirn
2022-09-14 17:17       ` Chaitanya Kulkarni
     [not found]   ` <CGME20220912082214eucas1p1a5796db60e6972eace43c3ab6976248c@eucas1p1.samsung.com>
2022-09-12  8:21     ` [PATCH v13 08/13] dm-zoned: ensure only power of 2 zone sizes are allowed Pankaj Raghav
2022-09-12 10:07       ` Johannes Thumshirn
     [not found]   ` <CGME20220912082216eucas1p1d3068e7578a88007515c2f4f5ebcc2a8@eucas1p1.samsung.com>
2022-09-12  8:22     ` [PATCH v13 09/13] dm-zone: use generic helpers to calculate offset from zone start Pankaj Raghav
2022-09-12 10:08       ` Johannes Thumshirn
     [not found]   ` <CGME20220912082217eucas1p15e4ba29d1438990db4acf5c3f6ca5d4f@eucas1p1.samsung.com>
2022-09-12  8:22     ` [PATCH v13 10/13] dm-table: allow zoned devices with non power-of-2 zone sizes Pankaj Raghav
2022-09-12 10:08       ` Johannes Thumshirn
     [not found]   ` <CGME20220912082218eucas1p23b4bcf6d76947724b9a7468a4b82a7f6@eucas1p2.samsung.com>
2022-09-12  8:22     ` [PATCH v13 11/13] dm: call dm_zone_endio after the target endio callback for zoned devices Pankaj Raghav
     [not found]   ` <CGME20220912082219eucas1p28467ed150230da8a65e4c957975fe438@eucas1p2.samsung.com>
2022-09-12  8:22     ` [PATCH v13 12/13] dm: introduce DM_EMULATED_ZONES target feature flag Pankaj Raghav
     [not found]   ` <CGME20220912082220eucas1p24605fdcf22aedc4c40d5303da8f17ad5@eucas1p2.samsung.com>
2022-09-12  8:22     ` [PATCH v13 13/13] dm: add power-of-2 target for zoned devices with non power-of-2 zone sizes Pankaj Raghav
2022-09-14 16:52       ` Mike Snitzer
2022-09-14 19:16         ` Pankaj Raghav
2022-09-16 17:57           ` Pankaj Raghav
2022-09-16 18:04             ` Mike Snitzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220912082204.51189-7-p.raghav@samsung.com \
    --to=p.raghav@samsung.com \
    --cc=Johannes.Thumshirn@wdc.com \
    --cc=agk@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@acm.org \
    --cc=damien.lemoal@opensource.wdc.com \
    --cc=dm-devel@redhat.com \
    --cc=gost.dev@samsung.com \
    --cc=hare@suse.de \
    --cc=hch@lst.de \
    --cc=jaegeuk@kernel.org \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=matias.bjorling@wdc.com \
    --cc=mcgrof@kernel.org \
    --cc=pankydev8@gmail.com \
    --cc=snitzer@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®