[PATCH AUTOSEL 4.19 1/9] ASoC: nau8824: Fix semaphore unbalance at error paths

[PATCH AUTOSEL 4.19 1/9] ASoC: nau8824: Fix semaphore unbalance at error paths

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 5628560e90395d3812800a8e44a01c32ffa429ec ]

The semaphore of nau8824 wasn't properly unlocked at some error
handling code paths, hence this may result in the unbalance (and
potential lock-up).  Fix them to handle the semaphore up properly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/nau8824.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c
index 4af87340b1655..4f18bb272e929 100644
--- a/sound/soc/codecs/nau8824.c
+++ b/sound/soc/codecs/nau8824.c
@@ -1075,6 +1075,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_component *component = dai->component;
 	struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component);
 	unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div;
+	int err = -EINVAL;
 
 	nau8824_sema_acquire(nau8824, HZ);
 
@@ -1091,7 +1092,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream,
 		osr &= NAU8824_DAC_OVERSAMPLE_MASK;
 		if (nau8824_clock_check(nau8824, substream->stream,
 			nau8824->fs, osr))
-			return -EINVAL;
+			goto error;
 		regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER,
 			NAU8824_CLK_DAC_SRC_MASK,
 			osr_dac_sel[osr].clk_src << NAU8824_CLK_DAC_SRC_SFT);
@@ -1101,7 +1102,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream,
 		osr &= NAU8824_ADC_SYNC_DOWN_MASK;
 		if (nau8824_clock_check(nau8824, substream->stream,
 			nau8824->fs, osr))
-			return -EINVAL;
+			goto error;
 		regmap_update_bits(nau8824->regmap, NAU8824_REG_CLK_DIVIDER,
 			NAU8824_CLK_ADC_SRC_MASK,
 			osr_adc_sel[osr].clk_src << NAU8824_CLK_ADC_SRC_SFT);
@@ -1122,7 +1123,7 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream,
 		else if (bclk_fs <= 256)
 			bclk_div = 0;
 		else
-			return -EINVAL;
+			goto error;
 		regmap_update_bits(nau8824->regmap,
 			NAU8824_REG_PORT0_I2S_PCM_CTRL_2,
 			NAU8824_I2S_LRC_DIV_MASK | NAU8824_I2S_BLK_DIV_MASK,
@@ -1143,15 +1144,17 @@ static int nau8824_hw_params(struct snd_pcm_substream *substream,
 		val_len |= NAU8824_I2S_DL_32;
 		break;
 	default:
-		return -EINVAL;
+		goto error;
 	}
 
 	regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1,
 		NAU8824_I2S_DL_MASK, val_len);
+	err = 0;
 
+ error:
 	nau8824_sema_release(nau8824);
 
-	return 0;
+	return err;
 }
 
 static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
@@ -1160,8 +1163,6 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 	struct nau8824 *nau8824 = snd_soc_component_get_drvdata(component);
 	unsigned int ctrl1_val = 0, ctrl2_val = 0;
 
-	nau8824_sema_acquire(nau8824, HZ);
-
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBM_CFM:
 		ctrl2_val |= NAU8824_I2S_MS_MASTER;
@@ -1203,6 +1204,8 @@ static int nau8824_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return -EINVAL;
 	}
 
+	nau8824_sema_acquire(nau8824, HZ);
+
 	regmap_update_bits(nau8824->regmap, NAU8824_REG_PORT0_I2S_PCM_CTRL_1,
 		NAU8824_I2S_DF_MASK | NAU8824_I2S_BP_MASK |
 		NAU8824_I2S_PCMB_EN, ctrl1_val);
-- 
2.35.1

[PATCH AUTOSEL 4.19 2/9] regulator: pfuze100: Fix the global-out-of-bounds access in pfuze100_regulator_probe()

[Sasha Levin]

From: Xiaolei Wang <xiaolei.wang@windriver.com>

[ Upstream commit 78e1e867f44e6bdc72c0e6a2609a3407642fb30b ]

The pfuze_chip::regulator_descs is an array of size
PFUZE100_MAX_REGULATOR, the pfuze_chip::pfuze_regulators
is the pointer to the real regulators of a specific device.
The number of real regulator is supposed to be less than
the PFUZE100_MAX_REGULATOR, so we should use the size of
'regulator_num * sizeof(struct pfuze_regulator)' in memcpy().
This fixes the out of bounds access bug reported by KASAN.

Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20220825111922.1368055-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/pfuze100-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 8b1940110561a..b1d73a6c7809e 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -710,7 +710,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		((pfuze_chip->chip_id == PFUZE3000) ? "3000" : "3001"))));
 
 	memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
-		sizeof(pfuze_chip->regulator_descs));
+		regulator_num * sizeof(struct pfuze_regulator));
 
 	ret = pfuze_parse_regulators_dt(pfuze_chip);
 	if (ret)
-- 
2.35.1

[PATCH AUTOSEL 4.19 3/9] rxrpc: Fix local destruction being repeated

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit d3d863036d688313f8d566b87acd7d99daf82749 ]

If the local processor work item for the rxrpc local endpoint gets requeued
by an event (such as an incoming packet) between it getting scheduled for
destruction and the UDP socket being closed, the rxrpc_local_destroyer()
function can get run twice.  The second time it can hang because it can end
up waiting for cleanup events that will never happen.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/rxrpc/local_object.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/rxrpc/local_object.c b/net/rxrpc/local_object.c
index fe190a6918727..5a01479aae3f3 100644
--- a/net/rxrpc/local_object.c
+++ b/net/rxrpc/local_object.c
@@ -452,6 +452,9 @@ static void rxrpc_local_processor(struct work_struct *work)
 		container_of(work, struct rxrpc_local, processor);
 	bool again;
 
+	if (local->dead)
+		return;
+
 	trace_rxrpc_local(local->debug_id, rxrpc_local_processing,
 			  atomic_read(&local->usage), NULL);
 
-- 
2.35.1

[PATCH AUTOSEL 4.19 4/9] ALSA: hda/sigmatel: Keep power up while beep is enabled

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ]

It seems that the beep playback doesn't work well on IDT codec devices
when the codec auto-pm is enabled.  Keep the power on while the beep
switch is enabled.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544
Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_sigmatel.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 85c33f528d7b3..2f6e4e3afd8f2 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -222,6 +222,7 @@ struct sigmatel_spec {
 
 	/* beep widgets */
 	hda_nid_t anabeep_nid;
+	bool beep_power_on;
 
 	/* SPDIF-out mux */
 	const char * const *spdif_labels;
@@ -4463,6 +4464,26 @@ static int stac_suspend(struct hda_codec *codec)
 	stac_shutup(codec);
 	return 0;
 }
+
+static int stac_check_power_status(struct hda_codec *codec, hda_nid_t nid)
+{
+	struct sigmatel_spec *spec = codec->spec;
+	int ret = snd_hda_gen_check_power_status(codec, nid);
+
+#ifdef CONFIG_SND_HDA_INPUT_BEEP
+	if (nid == spec->gen.beep_nid && codec->beep) {
+		if (codec->beep->enabled != spec->beep_power_on) {
+			spec->beep_power_on = codec->beep->enabled;
+			if (spec->beep_power_on)
+				snd_hda_power_up_pm(codec);
+			else
+				snd_hda_power_down_pm(codec);
+		}
+		ret |= spec->beep_power_on;
+	}
+#endif
+	return ret;
+}
 #else
 #define stac_suspend		NULL
 #endif /* CONFIG_PM */
@@ -4475,6 +4496,7 @@ static const struct hda_codec_ops stac_patch_ops = {
 	.unsol_event = snd_hda_jack_unsol_event,
 #ifdef CONFIG_PM
 	.suspend = stac_suspend,
+	.check_power_status = stac_check_power_status,
 #endif
 	.reboot_notify = stac_shutup,
 };
-- 
2.35.1

[PATCH AUTOSEL 4.19 5/9] ALSA: usb-audio: Fix an out-of-bounds bug in __snd_usb_parse_audio_interface()

[Sasha Levin]

From: Dongxiang Ke <kdx.glider@gmail.com>

[ Upstream commit e53f47f6c1a56d2af728909f1cb894da6b43d9bf ]

There may be a bad USB audio device with a USB ID of (0x04fa, 0x4201) and
the number of it's interfaces less than 4, an out-of-bounds read bug occurs
when parsing the interface descriptor for this device.

Fix this by checking the number of interfaces.

Signed-off-by: Dongxiang Ke <kdx.glider@gmail.com>
Link: https://lore.kernel.org/r/20220906024928.10951-1-kdx.glider@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/stream.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/usb/stream.c b/sound/usb/stream.c
index 9a950aaf5e356..1cfb30465df7d 100644
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -1111,7 +1111,7 @@ int snd_usb_parse_audio_interface(struct snd_usb_audio *chip, int iface_no)
 	 * Dallas DS4201 workaround: It presents 5 altsettings, but the last
 	 * one misses syncpipe, and does not produce any sound.
 	 */
-	if (chip->usb_id == USB_ID(0x04fa, 0x4201))
+	if (chip->usb_id == USB_ID(0x04fa, 0x4201) && num >= 4)
 		num = 4;
 
 	for (i = 0; i < num; i++) {
-- 
2.35.1

[PATCH AUTOSEL 4.19 6/9] net: usb: qmi_wwan: add Quectel RM520N

[Sasha Levin]

From: "jerry.meng" <jerry-meng@foxmail.com>

[ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ]

add support for Quectel RM520N which is based on Qualcomm SDX62 chip.

0x0801: DIAG + NMEA + AT + MODEM + RMNET

T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=0801 Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=RM520N-GL
S:  SerialNumber=384af524
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=88(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: jerry.meng <jerry-meng@foxmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index fcf21a1ca7761..8d10c29ba1763 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1049,6 +1049,7 @@ static const struct usb_device_id products[] = {
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)},	/* Quectel EM160R-GL */
 	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)},	/* Quectel RM520N */
 
 	/* 3. Combined interface devices matching on interface number */
 	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
-- 
2.35.1

[PATCH AUTOSEL 4.19 7/9] scsi: mpt3sas: Fix use-after-free warning

[Sasha Levin]

From: Sreekanth Reddy <sreekanth.reddy@broadcom.com>

[ Upstream commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 ]

Fix the following use-after-free warning which is observed during
controller reset:

refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0

Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index d899f216245e5..c8d97dc2ca63d 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3215,6 +3215,7 @@ static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc)
 		fw_event = list_first_entry(&ioc->fw_event_list,
 				struct fw_event_work, list);
 		list_del_init(&fw_event->list);
+		fw_event_work_put(fw_event);
 	}
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 
@@ -3249,7 +3250,6 @@ _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
 		if (cancel_work_sync(&fw_event->work))
 			fw_event_work_put(fw_event);
 
-		fw_event_work_put(fw_event);
 	}
 }
 
-- 
2.35.1

[PATCH AUTOSEL 4.19 8/9] MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()

[Sasha Levin]

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

[ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ]

For irq_domain_associate() to work the virq descriptor has to be
pre-allocated in advance. Otherwise the following happens:

WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8
error: virq128 is not allocated
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1
        ...
Call Trace:
[<ffffffff801344c4>] show_stack+0x9c/0x130
[<ffffffff80769550>] dump_stack+0x90/0xd0
[<ffffffff801576d0>] __warn+0x118/0x130
[<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70
[<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8
[<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c
[<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388
[<ffffffff80a452cc>] init_IRQ+0x4c/0xf4
[<ffffffff80a3cc00>] start_kernel+0x404/0x698

Use irq_alloc_desc_at() to avoid the above problem.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/cavium-octeon/octeon-irq.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 43e4fc1b373ca..3e5cf5515c01f 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -127,6 +127,16 @@ static void octeon_irq_free_cd(struct irq_domain *d, unsigned int irq)
 static int octeon_irq_force_ciu_mapping(struct irq_domain *domain,
 					int irq, int line, int bit)
 {
+	struct device_node *of_node;
+	int ret;
+
+	of_node = irq_domain_get_of_node(domain);
+	if (!of_node)
+		return -EINVAL;
+	ret = irq_alloc_desc_at(irq, of_node_to_nid(of_node));
+	if (ret < 0)
+		return ret;
+
 	return irq_domain_associate(domain, irq, line << 6 | bit);
 }
 
-- 
2.35.1

[PATCH AUTOSEL 4.19 9/9] mksysmap: Fix the mismatch of 'L0' symbols in System.map

[Sasha Levin]

From: Youling Tang <tangyouling@loongson.cn>

[ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ]

When System.map was generated, the kernel used mksysmap to filter the
kernel symbols, we need to filter "L0" symbols in LoongArch architecture.

$ cat System.map | grep L0
9000000000221540 t L0

The L0 symbol exists in System.map, but not in .tmp_System.map. When
"cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms
data" error message in link-vmlinux.sh script.

Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/mksysmap | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/mksysmap b/scripts/mksysmap
index 9aa23d15862a0..ad8bbc52267d0 100755
--- a/scripts/mksysmap
+++ b/scripts/mksysmap
@@ -41,4 +41,4 @@
 # so we just ignore them to let readprofile continue to work.
 # (At least sparc64 has __crc_ in the middle).
 
-$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)' > $2
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)\|\( \.L\)\|\( L0\)' > $2
-- 
2.35.1