From: Aradhya Bhatia <a-bhatia1@ti.com>
To: Tomi Valkeinen <tomba@kernel.org>, Jyri Sarha <jyri.sarha@iki.fi>,
Rob Herring <robh+dt@kernel.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Rahul T R <r-ravikumar@ti.com>,
DRI Development List <dri-devel@lists.freedesktop.org>,
Devicetree List <devicetree@vger.kernel.org>,
Linux Kernel List <linux-kernel@vger.kernel.org>
Subject: [RFC PATCH v5 0/6] Add DSS support for AM625 SoC
Date: Wed, 28 Sep 2022 23:22:17 +0530 [thread overview]
Message-ID: <20220928175223.15225-1-a-bhatia1@ti.com> (raw)
This patch series adds a new compatible for the Display SubSyetem
controller on TI's AM625 SoC. It further adds the required support for
the same in the tidss driver. The AM625-DSS is a newer version of the DSS
from the AM65X version with the major change being the addition of
another OLDI TX. With the help of 2 OLDI TXes, the AM625 DSS supports
OLDI displays with a resolution of upto 2K.
This patch set further adds support for the OLDI on AM625, and is, in
essence, the second version of the following patch series:
https://patchwork.kernel.org/project/dri-devel/list/?series=660970&state=%2A&archive=both
The changes in the above-mentioned series forced some re-works in this
series, and are better reviewed as a single set.
TODO:
- Support for OLDI Bridges that work on clone / dual-link modes is yet
to be added.
- The pixel clock for the OLDI VP passes through a clock divider, which
was being explicitly set in previous series, but that was not the
right way. That patch has been dropped and a newer implementation is
in works.
Note:
- Due to lack of hardware, only dual-link mode has been tested.
Changelog:
V5:
- Rebase for current merge window
- Add max DT ports in DSS features
- Combine the OLDI support series
(Changes from OLDI support series v1)
- Address Tomi Valkeinen's comments
1. Update the OLDI link detection approach
2. Add port #3 for 2nd OLDI TX
3. Configure 2 panel-bridges for cloned panels
4. Drop the OLDI clock set patch
5. Drop rgb565-to-888 patch
V4:
- Rebase for current merge window
- Add acked and reviewed by tags
V3:
- Change yaml enum in alphabetical order
- Correct a typo
V2:
- Remove redundant regsiter array
Aradhya Bhatia (6):
dt-bindings: display: ti,am65x-dss: Add am625 dss compatible
dt-bindings: display: ti: am65x-dss: Add new port for am625-dss
drm/tidss: Add support for AM625 DSS
drm/tidss: Add support to configure OLDI mode for am625-dss.
drm/tidss: Add IO CTRL and Power support for OLDI TX in am625
drm/tidss: Enable Dual and Duplicate Modes for OLDI
.../bindings/display/ti/ti,am65x-dss.yaml | 22 ++-
drivers/gpu/drm/tidss/tidss_dispc.c | 155 ++++++++++++++++--
drivers/gpu/drm/tidss/tidss_dispc.h | 11 ++
drivers/gpu/drm/tidss/tidss_dispc_regs.h | 6 +
drivers/gpu/drm/tidss/tidss_drv.c | 1 +
drivers/gpu/drm/tidss/tidss_drv.h | 3 +
drivers/gpu/drm/tidss/tidss_kms.c | 146 ++++++++++++++---
7 files changed, 304 insertions(+), 40 deletions(-)
--
2.37.0
next reply other threads:[~2022-09-28 17:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 17:52 Aradhya Bhatia [this message]
2022-09-28 17:52 ` [RFC PATCH v5 1/6] dt-bindings: display: ti,am65x-dss: Add am625 dss compatible Aradhya Bhatia
2022-10-12 11:28 ` Tomi Valkeinen
2022-09-28 17:52 ` [RFC PATCH v5 2/6] dt-bindings: display: ti: am65x-dss: Add new port for am625-dss Aradhya Bhatia
2022-09-28 18:14 ` Krzysztof Kozlowski
2022-09-28 17:52 ` [RFC PATCH v5 3/6] drm/tidss: Add support for AM625 DSS Aradhya Bhatia
2022-10-12 11:40 ` Tomi Valkeinen
2022-10-12 12:09 ` Tomi Valkeinen
2022-09-28 17:52 ` [RFC PATCH v5 4/6] drm/tidss: Add support to configure OLDI mode for am625-dss Aradhya Bhatia
2022-10-12 12:23 ` Tomi Valkeinen
2022-10-18 7:00 ` Aradhya Bhatia
2022-10-24 7:17 ` Tomi Valkeinen
2022-09-28 17:52 ` [RFC PATCH v5 5/6] drm/tidss: Add IO CTRL and Power support for OLDI TX in am625 Aradhya Bhatia
2022-10-12 12:29 ` Tomi Valkeinen
2022-10-19 17:14 ` Aradhya Bhatia
2022-09-28 17:52 ` [RFC PATCH v5 6/6] drm/tidss: Enable Dual and Duplicate Modes for OLDI Aradhya Bhatia
2022-10-12 12:35 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928175223.15225-1-a-bhatia1@ti.com \
--to=a-bhatia1@ti.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jyri.sarha@iki.fi \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=r-ravikumar@ti.com \
--cc=robh+dt@kernel.org \
--cc=tomba@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®