From: Aradhya Bhatia <a-bhatia1@ti.com>
To: Tomi Valkeinen <tomba@kernel.org>, Jyri Sarha <jyri.sarha@iki.fi>,
Rob Herring <robh+dt@kernel.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Rahul T R <r-ravikumar@ti.com>,
DRI Development List <dri-devel@lists.freedesktop.org>,
Devicetree List <devicetree@vger.kernel.org>,
Linux Kernel List <linux-kernel@vger.kernel.org>
Subject: [RFC PATCH v5 3/6] drm/tidss: Add support for AM625 DSS
Date: Wed, 28 Sep 2022 23:22:20 +0530 [thread overview]
Message-ID: <20220928175223.15225-4-a-bhatia1@ti.com> (raw)
In-Reply-To: <20220928175223.15225-1-a-bhatia1@ti.com>
Add support for the DSS controller on TI's new AM625 SoC in the tidss
driver.
The first video port (VP0) in am625-dss can output OLDI signals through
2 OLDI TXes. A 3rd port has been added with "DISPC_VP_OLDI" bus type.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
---
drivers/gpu/drm/tidss/tidss_dispc.c | 61 ++++++++++++++++++++++++++++-
drivers/gpu/drm/tidss/tidss_dispc.h | 3 ++
drivers/gpu/drm/tidss/tidss_drv.c | 1 +
3 files changed, 64 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
index dd3c6a606ae2..34f0da4bb3e3 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -93,6 +93,7 @@ const struct dispc_features dispc_k2g_feats = {
.common_regs = tidss_k2g_common_regs,
.num_vps = 1,
+ .num_max_ports = 1,
.vp_name = { "vp1" },
.ovr_name = { "ovr1" },
.vpclk_name = { "vp1" },
@@ -168,6 +169,7 @@ const struct dispc_features dispc_am65x_feats = {
.common_regs = tidss_am65x_common_regs,
.num_vps = 2,
+ .num_max_ports = 2,
.vp_name = { "vp1", "vp2" },
.ovr_name = { "ovr1", "ovr2" },
.vpclk_name = { "vp1", "vp2" },
@@ -257,6 +259,7 @@ const struct dispc_features dispc_j721e_feats = {
.common_regs = tidss_j721e_common_regs,
.num_vps = 4,
+ .num_max_ports = 4,
.vp_name = { "vp1", "vp2", "vp3", "vp4" },
.ovr_name = { "ovr1", "ovr2", "ovr3", "ovr4" },
.vpclk_name = { "vp1", "vp2", "vp3", "vp4" },
@@ -275,6 +278,57 @@ const struct dispc_features dispc_j721e_feats = {
.vid_order = { 1, 3, 0, 2 },
};
+const struct dispc_features dispc_am625_feats = {
+ .max_pclk_khz = {
+ [DISPC_VP_DPI] = 165000,
+ [DISPC_VP_OLDI] = 165000,
+ },
+
+ .scaling = {
+ .in_width_max_5tap_rgb = 1280,
+ .in_width_max_3tap_rgb = 2560,
+ .in_width_max_5tap_yuv = 2560,
+ .in_width_max_3tap_yuv = 4096,
+ .upscale_limit = 16,
+ .downscale_limit_5tap = 4,
+ .downscale_limit_3tap = 2,
+ /*
+ * The max supported pixel inc value is 255. The value
+ * of pixel inc is calculated like this: 1+(xinc-1)*bpp.
+ * The maximum bpp of all formats supported by the HW
+ * is 8. So the maximum supported xinc value is 32,
+ * because 1+(32-1)*8 < 255 < 1+(33-1)*4.
+ */
+ .xinc_max = 32,
+ },
+
+ .subrev = DISPC_AM625,
+
+ .common = "common",
+ .common_regs = tidss_am65x_common_regs,
+
+ .num_vps = 2,
+ /* note: the 3rd port is not representative of a 3rd pipeline */
+ .num_max_ports = 3,
+ .vp_name = { "vp1", "vp2" },
+ .ovr_name = { "ovr1", "ovr2" },
+ .vpclk_name = { "vp1", "vp2" },
+ .vp_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI, DISPC_VP_OLDI },
+
+ .vp_feat = { .color = {
+ .has_ctm = true,
+ .gamma_size = 256,
+ .gamma_type = TIDSS_GAMMA_8BIT,
+ },
+ },
+
+ .num_planes = 2,
+ /* note: vid is plane_id 0 and vidl1 is plane_id 1 */
+ .vid_name = { "vid", "vidl1" },
+ .vid_lite = { false, true, },
+ .vid_order = { 1, 0 },
+};
+
static const u16 *dispc_common_regmap;
struct dss_vp_data {
@@ -778,6 +832,7 @@ dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc)
return dispc_k2g_read_and_clear_irqstatus(dispc);
case DISPC_AM65X:
case DISPC_J721E:
+ case DISPC_AM625:
return dispc_k3_read_and_clear_irqstatus(dispc);
default:
WARN_ON(1);
@@ -793,6 +848,7 @@ void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask)
break;
case DISPC_AM65X:
case DISPC_J721E:
+ case DISPC_AM625:
dispc_k3_set_irqenable(dispc, mask);
break;
default:
@@ -1282,6 +1338,7 @@ void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane,
x, y, layer);
break;
case DISPC_AM65X:
+ case DISPC_AM625:
dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport,
x, y, layer);
break;
@@ -2205,6 +2262,7 @@ static void dispc_plane_init(struct dispc_device *dispc)
break;
case DISPC_AM65X:
case DISPC_J721E:
+ case DISPC_AM625:
dispc_k3_plane_init(dispc);
break;
default:
@@ -2310,6 +2368,7 @@ static void dispc_vp_write_gamma_table(struct dispc_device *dispc,
dispc_k2g_vp_write_gamma_table(dispc, hw_videoport);
break;
case DISPC_AM65X:
+ case DISPC_AM625:
dispc_am65x_vp_write_gamma_table(dispc, hw_videoport);
break;
case DISPC_J721E:
@@ -2583,7 +2642,7 @@ int dispc_runtime_resume(struct dispc_device *dispc)
REG_GET(dispc, DSS_SYSSTATUS, 2, 2),
REG_GET(dispc, DSS_SYSSTATUS, 3, 3));
- if (dispc->feat->subrev == DISPC_AM65X)
+ if (dispc->feat->subrev == DISPC_AM65X || dispc->feat->subrev == DISPC_AM625)
dev_dbg(dispc->dev, "OLDI RESETDONE %d,%d,%d\n",
REG_GET(dispc, DSS_SYSSTATUS, 5, 5),
REG_GET(dispc, DSS_SYSSTATUS, 6, 6),
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.h b/drivers/gpu/drm/tidss/tidss_dispc.h
index e49432f0abf5..b66418e583ee 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.h
+++ b/drivers/gpu/drm/tidss/tidss_dispc.h
@@ -61,6 +61,7 @@ enum dispc_dss_subrevision {
DISPC_K2G,
DISPC_AM65X,
DISPC_J721E,
+ DISPC_AM625,
};
struct dispc_features {
@@ -74,6 +75,7 @@ struct dispc_features {
const char *common;
const u16 *common_regs;
u32 num_vps;
+ u32 num_max_ports;
const char *vp_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */
const char *ovr_name[TIDSS_MAX_PORTS]; /* Should match dt reg names */
const char *vpclk_name[TIDSS_MAX_PORTS]; /* Should match dt clk names */
@@ -88,6 +90,7 @@ struct dispc_features {
extern const struct dispc_features dispc_k2g_feats;
extern const struct dispc_features dispc_am65x_feats;
extern const struct dispc_features dispc_j721e_feats;
+extern const struct dispc_features dispc_am625_feats;
void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask);
dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc);
diff --git a/drivers/gpu/drm/tidss/tidss_drv.c b/drivers/gpu/drm/tidss/tidss_drv.c
index 04cfff89ee51..326059e99696 100644
--- a/drivers/gpu/drm/tidss/tidss_drv.c
+++ b/drivers/gpu/drm/tidss/tidss_drv.c
@@ -235,6 +235,7 @@ static const struct of_device_id tidss_of_table[] = {
{ .compatible = "ti,k2g-dss", .data = &dispc_k2g_feats, },
{ .compatible = "ti,am65x-dss", .data = &dispc_am65x_feats, },
{ .compatible = "ti,j721e-dss", .data = &dispc_j721e_feats, },
+ { .compatible = "ti,am625-dss", .data = &dispc_am625_feats, },
{ }
};
--
2.37.0
next prev parent reply other threads:[~2022-09-28 17:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 17:52 [RFC PATCH v5 0/6] Add DSS support for AM625 SoC Aradhya Bhatia
2022-09-28 17:52 ` [RFC PATCH v5 1/6] dt-bindings: display: ti,am65x-dss: Add am625 dss compatible Aradhya Bhatia
2022-10-12 11:28 ` Tomi Valkeinen
2022-09-28 17:52 ` [RFC PATCH v5 2/6] dt-bindings: display: ti: am65x-dss: Add new port for am625-dss Aradhya Bhatia
2022-09-28 18:14 ` Krzysztof Kozlowski
2022-09-28 17:52 ` Aradhya Bhatia [this message]
2022-10-12 11:40 ` [RFC PATCH v5 3/6] drm/tidss: Add support for AM625 DSS Tomi Valkeinen
2022-10-12 12:09 ` Tomi Valkeinen
2022-09-28 17:52 ` [RFC PATCH v5 4/6] drm/tidss: Add support to configure OLDI mode for am625-dss Aradhya Bhatia
2022-10-12 12:23 ` Tomi Valkeinen
2022-10-18 7:00 ` Aradhya Bhatia
2022-10-24 7:17 ` Tomi Valkeinen
2022-09-28 17:52 ` [RFC PATCH v5 5/6] drm/tidss: Add IO CTRL and Power support for OLDI TX in am625 Aradhya Bhatia
2022-10-12 12:29 ` Tomi Valkeinen
2022-10-19 17:14 ` Aradhya Bhatia
2022-09-28 17:52 ` [RFC PATCH v5 6/6] drm/tidss: Enable Dual and Duplicate Modes for OLDI Aradhya Bhatia
2022-10-12 12:35 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928175223.15225-4-a-bhatia1@ti.com \
--to=a-bhatia1@ti.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jyri.sarha@iki.fi \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=r-ravikumar@ti.com \
--cc=robh+dt@kernel.org \
--cc=tomba@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®