From: Weilong Chen <chenweilong@huawei.com>
To: <chenweilong@huawei.com>, <linus.walleij@linaro.org>,
<brgl@bgdev.pl>, <f.fangjian@huawei.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Subject: [PATCH next v3 1/2] gpio: hisi: Add initial device tree support
Date: Sat, 29 Oct 2022 19:35:41 +0800 [thread overview]
Message-ID: <20221029113542.170210-1-chenweilong@huawei.com> (raw)
Add support for HiSilicon GPIO controller in embedded platform, which
boot from devicetree.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
---
Change since v2:
- No change
Link: https://lore.kernel.org/lkml/20221028022453.163186-1-chenweilong@huawei.com/#r
drivers/gpio/Kconfig | 2 +-
drivers/gpio/gpio-hisi.c | 15 ++++++++++++++-
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e034f752e7ce..71a7880af59d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -310,7 +310,7 @@ config GPIO_GRGPIO
config GPIO_HISI
tristate "HiSilicon GPIO controller driver"
- depends on (ARM64 && ACPI) || COMPILE_TEST
+ depends on ARM64 || COMPILE_TEST
select GPIO_GENERIC
select GPIOLIB_IRQCHIP
help
diff --git a/drivers/gpio/gpio-hisi.c b/drivers/gpio/gpio-hisi.c
index 3caabef5c7a2..92cf575f2eab 100644
--- a/drivers/gpio/gpio-hisi.c
+++ b/drivers/gpio/gpio-hisi.c
@@ -1,8 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2020 HiSilicon Limited. */
+#include <linux/acpi.h>
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/property.h>
@@ -215,11 +217,21 @@ static void hisi_gpio_init_irq(struct hisi_gpio *hisi_gpio)
hisi_gpio_write_reg(chip, HISI_GPIO_INTCOMB_MASK_WX, 1);
}
+#ifdef CONFIG_ACPI
static const struct acpi_device_id hisi_gpio_acpi_match[] = {
{"HISI0184", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, hisi_gpio_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id hisi_gpio_dts_match[] = {
+ { .compatible = "hisilicon,ascend910-gpio", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, hisi_gpio_dts_match);
+#endif
static void hisi_gpio_get_pdata(struct device *dev,
struct hisi_gpio *hisi_gpio)
@@ -310,7 +322,8 @@ static int hisi_gpio_probe(struct platform_device *pdev)
static struct platform_driver hisi_gpio_driver = {
.driver = {
.name = HISI_GPIO_DRIVER_NAME,
- .acpi_match_table = hisi_gpio_acpi_match,
+ .acpi_match_table = ACPI_PTR(hisi_gpio_acpi_match),
+ .of_match_table = of_match_ptr(hisi_gpio_dts_match),
},
.probe = hisi_gpio_probe,
};
--
2.31.GIT
next reply other threads:[~2022-10-29 11:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-29 11:35 Weilong Chen [this message]
2022-10-29 11:35 ` [PATCH next v3 2/2] dt-bindings: gpio: add entry for hisilicon,ascend910-gpio Weilong Chen
2022-11-03 8:33 ` [PATCH next v3 1/2] gpio: hisi: Add initial device tree support Jay Fang
2022-11-01 8:24 Weilong Chen
2022-11-02 12:49 ` Bartosz Golaszewski
2022-11-03 1:07 ` chenweilong
2022-11-03 8:40 ` Jay Fang
2022-11-03 8:50 ` chenweilong
2022-11-07 20:37 ` Bartosz Golaszewski
2022-11-03 12:19 ` Yicong Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221029113542.170210-1-chenweilong@huawei.com \
--to=chenweilong@huawei.com \
--cc=brgl@bgdev.pl \
--cc=devicetree@vger.kernel.org \
--cc=f.fangjian@huawei.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®