mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jay Fang <f.fangjian@huawei.com>
To: Weilong Chen <chenweilong@huawei.com>, <linus.walleij@linaro.org>,
	<brgl@bgdev.pl>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>
Subject: Re: [PATCH next v3 1/2] gpio: hisi: Add initial device tree support
Date: Thu, 3 Nov 2022 16:33:07 +0800	[thread overview]
Message-ID: <a2e03ec4-219d-7587-48a6-d03c2fc1f1cb@huawei.com> (raw)
In-Reply-To: <20221029113542.170210-1-chenweilong@huawei.com>

On 2022/10/29 19:35, Weilong Chen wrote:
> Add support for HiSilicon GPIO controller in embedded platform, which
> boot from devicetree.
> 
> Signed-off-by: Weilong Chen <chenweilong@huawei.com>
> ---
> Change since v2:
> - No change
> Link: https://lore.kernel.org/lkml/20221028022453.163186-1-chenweilong@huawei.com/#r
> 
>  drivers/gpio/Kconfig     |  2 +-
>  drivers/gpio/gpio-hisi.c | 15 ++++++++++++++-
>  2 files changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index e034f752e7ce..71a7880af59d 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -310,7 +310,7 @@ config GPIO_GRGPIO
>  
>  config GPIO_HISI
>  	tristate "HiSilicon GPIO controller driver"
> -	depends on (ARM64 && ACPI) || COMPILE_TEST
> +	depends on ARM64 || COMPILE_TEST
>  	select GPIO_GENERIC
>  	select GPIOLIB_IRQCHIP
>  	help
> diff --git a/drivers/gpio/gpio-hisi.c b/drivers/gpio/gpio-hisi.c
> index 3caabef5c7a2..92cf575f2eab 100644
> --- a/drivers/gpio/gpio-hisi.c
> +++ b/drivers/gpio/gpio-hisi.c
> @@ -1,8 +1,10 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /* Copyright (c) 2020 HiSilicon Limited. */
> +#include <linux/acpi.h>
>  #include <linux/gpio/driver.h>
>  #include <linux/module.h>
>  #include <linux/mod_devicetable.h>
> +#include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/property.h>
>  
> @@ -215,11 +217,21 @@ static void hisi_gpio_init_irq(struct hisi_gpio *hisi_gpio)
>  	hisi_gpio_write_reg(chip, HISI_GPIO_INTCOMB_MASK_WX, 1);
>  }
>  
> +#ifdef CONFIG_ACPI
>  static const struct acpi_device_id hisi_gpio_acpi_match[] = {
>  	{"HISI0184", 0},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(acpi, hisi_gpio_acpi_match);
> +#endif
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id hisi_gpio_dts_match[] = {
> +	{ .compatible = "hisilicon,ascend910-gpio", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, hisi_gpio_dts_match);
> +#endif
>  
>  static void hisi_gpio_get_pdata(struct device *dev,
>  				struct hisi_gpio *hisi_gpio)
> @@ -310,7 +322,8 @@ static int hisi_gpio_probe(struct platform_device *pdev)
>  static struct platform_driver hisi_gpio_driver = {
>  	.driver		= {
>  		.name	= HISI_GPIO_DRIVER_NAME,
> -		.acpi_match_table = hisi_gpio_acpi_match,
> +		.acpi_match_table = ACPI_PTR(hisi_gpio_acpi_match),
> +		.of_match_table = of_match_ptr(hisi_gpio_dts_match),
>  	},
>  	.probe		= hisi_gpio_probe,
>  };
> 
Acked-by: Jay Fang <f.fangjian@huawei.com>

  parent reply	other threads:[~2022-11-03  8:33 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-29 11:35 Weilong Chen
2022-10-29 11:35 ` [PATCH next v3 2/2] dt-bindings: gpio: add entry for hisilicon,ascend910-gpio Weilong Chen
2022-11-03  8:33 ` Jay Fang [this message]
2022-11-01  8:24 [PATCH next v3 1/2] gpio: hisi: Add initial device tree support Weilong Chen
2022-11-02 12:49 ` Bartosz Golaszewski
2022-11-03  1:07   ` chenweilong
2022-11-03  8:40 ` Jay Fang
2022-11-03  8:50 ` chenweilong
2022-11-07 20:37   ` Bartosz Golaszewski
2022-11-03 12:19 ` Yicong Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a2e03ec4-219d-7587-48a6-d03c2fc1f1cb@huawei.com \
    --to=f.fangjian@huawei.com \
    --cc=brgl@bgdev.pl \
    --cc=chenweilong@huawei.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®