From: Weilong Chen <chenweilong@huawei.com>
To: <chenweilong@huawei.com>, <f.fangjian@huawei.com>,
<linus.walleij@linaro.org>, <brgl@bgdev.pl>,
<yangyicong@hisilicon.com>, <xuwei5@huawei.com>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>
Subject: [PATCH next v3 2/2] dt-bindings: gpio: add entry for hisilicon,ascend910-gpio
Date: Tue, 1 Nov 2022 16:24:42 +0800 [thread overview]
Message-ID: <20221101082442.263448-2-chenweilong@huawei.com> (raw)
In-Reply-To: <20221101082442.263448-1-chenweilong@huawei.com>
Add the new compatible for HiSilicon gpio controller driver.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
---
Change since v2:
- No change.
Link: https://lore.kernel.org/lkml/20221028022453.163186-2-chenweilong@huawei.com/
Change since v1:
- Drop "Device Tree Bindings" and reg's description
- Move description in top-level description.
- Add gpio-cells to required
- Use additionalProperties and decimal numbers
- Use IRQ flags
- Use vendor,soc-ipblock format
Link: https://lore.kernel.org/lkml/20221026034219.172880-2-chenweilong@huawei.com/
.../gpio/hisilicon,ascend910-gpio.yaml | 56 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
new file mode 100644
index 000000000000..735d97d645a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/hisilicon,ascend910-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common GPIO controller
+
+maintainers:
+ - Jay Fang <f.fangjian@huawei.com>
+
+description:
+ The HiSilicon common GPIO controller can be used for many different
+ types of SoC such as Huawei Ascend AI series chips.
+
+properties:
+ compatible:
+ const: hisilicon,ascend910-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ ngpios:
+ minimum: 1
+ maximum: 32
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - gpio-controller
+ - "#gpio-cells"
+ - ngpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpio@840d0000 {
+ compatible = "hisilicon,ascend910-gpio";
+ reg = <0x840d0000 0x1000>;
+ ngpios = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index d42e34d1e8e2..74ac2e7a8e4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9212,6 +9212,7 @@ HISILICON GPIO DRIVER
M: Jay Fang <f.fangjian@huawei.com>
L: linux-gpio@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
F: drivers/gpio/gpio-hisi.c
HISILICON HIGH PERFORMANCE RSA ENGINE DRIVER (HPRE)
--
2.31.GIT
next prev parent reply other threads:[~2022-11-01 8:17 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-01 8:24 [PATCH next v3 1/2] gpio: hisi: Add initial device tree support Weilong Chen
2022-11-01 8:24 ` Weilong Chen [this message]
2022-11-02 17:13 ` [PATCH next v3 2/2] dt-bindings: gpio: add entry for hisilicon,ascend910-gpio Rob Herring
2022-11-03 12:36 ` Yicong Yang
2022-11-02 12:49 ` [PATCH next v3 1/2] gpio: hisi: Add initial device tree support Bartosz Golaszewski
2022-11-03 1:07 ` chenweilong
2022-11-03 8:40 ` Jay Fang
2022-11-03 8:50 ` chenweilong
2022-11-07 20:37 ` Bartosz Golaszewski
2022-11-03 12:19 ` Yicong Yang
-- strict thread matches above, loose matches on Subject: below --
2022-10-29 11:35 Weilong Chen
2022-10-29 11:35 ` [PATCH next v3 2/2] dt-bindings: gpio: add entry for hisilicon,ascend910-gpio Weilong Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221101082442.263448-2-chenweilong@huawei.com \
--to=chenweilong@huawei.com \
--cc=brgl@bgdev.pl \
--cc=devicetree@vger.kernel.org \
--cc=f.fangjian@huawei.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=xuwei5@huawei.com \
--cc=yangyicong@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®