mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@kernel.org>
To: Waiman Long <longman@redhat.com>
Cc: tglx@linutronix.de, linux-kernel@vger.kernel.org,
	john.stultz@linaro.org, sboyd@kernel.org, corbet@lwn.net,
	Mark.Rutland@arm.com, maz@kernel.org, kernel-team@meta.com,
	neeraju@codeaurora.org, ak@linux.intel.com, feng.tang@intel.com,
	zhengjun.xing@intel.com, John Stultz <jstultz@google.com>
Subject: Re: [PATCH clocksource 2/2] clocksource: Exponential backoff for load-induced bogus watchdog reads
Date: Thu, 3 Nov 2022 17:26:16 -0700	[thread overview]
Message-ID: <20221104002616.GH5600@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <61470eb8-fc3c-7f95-881e-03da1805b5ac@redhat.com>

On Thu, Nov 03, 2022 at 08:20:27PM -0400, Waiman Long wrote:
> On 11/3/22 16:49, Paul E. McKenney wrote:
> > commit da44b8af99222ff8761a98ca8c00837a7d607d28
> > Author: Paul E. McKenney<paulmck@kernel.org>
> > Date:   Fri Oct 28 10:38:58 2022 -0700
> > 
> >      clocksource: Exponential backoff for load-induced bogus watchdog reads
> >      The clocksource watchdog will reject measurements that are excessively
> >      delayed, that is, by more than 1.5 seconds beyond the intended 0.5-second
> >      watchdog interval.  On an extremely busy system, this can result in a
> >      console message being printed every two seconds.  This is excessively
> >      noisy for a non-error condition.
> >      Therefore, apply exponential backoff to these messages.  This exponential
> >      backoff is capped at 1024 times the watchdog interval, which comes to
> >      not quite one message per ten minutes.
> >      Please note that the bogus watchdog reads that occur when the watchdog
> >      interval is less than 0.125 seconds are still printed unconditionally
> >      because these likely correspond to a serious error condition in the
> >      timer code or hardware.
> >      [ paulmck: Apply Feng Tang feedback. ]
> >      [ paulmck: Apply Waiman Long feedback. ]
> >      Reported-by: Waiman Long<longman@redhat.com>
> >      Reported-by: Feng Tang<feng.tang@intel.com>
> >      Signed-off-by: Paul E. McKenney<paulmck@kernel.org>
> >      Cc: John Stultz<jstultz@google.com>
> >      Cc: Thomas Gleixner<tglx@linutronix.de>
> >      Cc: Stephen Boyd<sboyd@kernel.org>
> >      Cc: Feng Tang<feng.tang@intel.com>
> >      Cc: Waiman Long<longman@redhat.com>
> > 
> > diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
> > index 1d42d4b173271..23b73f2293d6d 100644
> > --- a/include/linux/clocksource.h
> > +++ b/include/linux/clocksource.h
> > @@ -125,6 +125,9 @@ struct clocksource {
> >   	struct list_head	wd_list;
> >   	u64			cs_last;
> >   	u64			wd_last;
> > +	u64			wd_last_bogus;
> > +	int			wd_bogus_shift;
> > +	unsigned long		wd_bogus_count;
> >   #endif
> >   	struct module		*owner;
> >   };
> > diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
> > index 3f5317faf891f..1eefb56505350 100644
> > --- a/kernel/time/clocksource.c
> > +++ b/kernel/time/clocksource.c
> > @@ -442,14 +442,33 @@ static void clocksource_watchdog(struct timer_list *unused)
> >   		/* Check for bogus measurements. */
> >   		wdi = jiffies_to_nsecs(WATCHDOG_INTERVAL);
> > -		if (wd_nsec < (wdi >> 2)) {
> > -			/* This usually indicates broken timer code or hardware. */
> > -			pr_warn("timekeeping watchdog on CPU%d: Watchdog clocksource '%s' advanced only %lld ns during %d-jiffy time interval, skipping watchdog check.\n", smp_processor_id(), watchdog->name, wd_nsec, WATCHDOG_INTERVAL);
> > +		if (wd_nsec > (wdi << 2) || cs_nsec > (wdi << 2)) {
> > +			bool needwarn = false;
> > +			u64 wd_lb;
> > +
> > +			cs->wd_bogus_count++;
> > +			if (!cs->wd_bogus_shift) {
> > +				needwarn = true;
> > +			} else {
> > +				delta = clocksource_delta(wdnow, cs->wd_last_bogus, watchdog->mask);
> > +				wd_lb = clocksource_cyc2ns(delta, watchdog->mult, watchdog->shift);
> > +				if ((1 << cs->wd_bogus_shift) * wdi <= wd_lb)
> > +					needwarn = true;
> > +			}
> > +			if (needwarn) {
> > +				/* This can happen on busy systems, which can delay the watchdog. */
> > +				pr_warn("timekeeping watchdog on CPU%d: Watchdog clocksource '%s' advanced an excessive %lld ns during %d-jiffy time interval (%lu additional), probable CPU overutilization, skipping watchdog check.\n", smp_processor_id(), watchdog->name, wd_nsec, WATCHDOG_INTERVAL, cs->wd_bogus_count);
> 
> Just one question, does "%lu additional" means the number of bogus count
> that doesn't meet the needwarn requirement and hence skipped. If so, I think
> you have to use "cs->wd_bogus_cnt - 1". Other than that, the change looks
> good to me.

It means the number since the last report, or, for the first report,
the number since boot.

Does that work for you?

							Thanx, Paul

  reply	other threads:[~2022-11-04  0:26 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-02 18:40 [PATCH clocksource 0/2] Clocksource-watchdog classification and backoff Paul E. McKenney
2022-11-02 18:40 ` [PATCH clocksource 1/2] clocksource: Add comments to classify bogus measurements Paul E. McKenney
2022-11-03  2:23   ` Waiman Long
2022-11-03 20:47     ` Paul E. McKenney
2022-11-04  2:13   ` Feng Tang
2022-11-02 18:40 ` [PATCH clocksource 2/2] clocksource: Exponential backoff for load-induced bogus watchdog reads Paul E. McKenney
2022-11-03  2:28   ` Waiman Long
2022-11-03 20:49     ` Paul E. McKenney
2022-11-04  0:20       ` Waiman Long
2022-11-04  0:26         ` Paul E. McKenney [this message]
2022-11-04  1:01           ` Waiman Long
2022-11-04  2:23             ` Paul E. McKenney
2022-11-04 13:55               ` Waiman Long
2022-11-05  2:38                 ` Paul E. McKenney
2022-11-05  2:49                   ` Waiman Long
2022-11-05 19:31                     ` Paul E. McKenney
2022-11-04  2:16   ` Feng Tang
2022-11-04  2:25     ` Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221104002616.GH5600@paulmck-ThinkPad-P17-Gen-1 \
    --to=paulmck@kernel.org \
    --cc=Mark.Rutland@arm.com \
    --cc=ak@linux.intel.com \
    --cc=corbet@lwn.net \
    --cc=feng.tang@intel.com \
    --cc=john.stultz@linaro.org \
    --cc=jstultz@google.com \
    --cc=kernel-team@meta.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=longman@redhat.com \
    --cc=maz@kernel.org \
    --cc=neeraju@codeaurora.org \
    --cc=sboyd@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=zhengjun.xing@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®