mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Gabriel Somlo <gsomlo@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-serial@vger.kernel.org, gregkh@linuxfoundation.org,
	jirislaby@kernel.org, kgugala@antmicro.com,
	mholenko@antmicro.com, joel@jms.id.au,
	david.abdurachmanov@sifive.com, florent@enjoy-digital.fr
Subject: [PATCH v1 1/3] serial: liteuart: cosmetic changes
Date: Mon,  7 Nov 2022 12:14:58 -0500	[thread overview]
Message-ID: <20221107171500.2537938-2-gsomlo@gmail.com> (raw)
In-Reply-To: <20221107171500.2537938-1-gsomlo@gmail.com>

Make some cosmetic/stylistic (non-functional) improvements:

1. Use a DRV_NAME macro to avoid hard-coding "liteuart" in multiple
locations throughout the source file

2. Use bit numbers instead of magic constants for event flags

3. Remove stub uart_ops methods that are not called unconditionally
from serial_core; Document stubs that are required by serial_core

4. Don't set unused port->regshift and port->iobase fields gratuitously
during probe()

5. Improve coding style in liteuart_init()

Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
---
 drivers/tty/serial/liteuart.c | 38 +++++++++--------------------------
 1 file changed, 10 insertions(+), 28 deletions(-)

diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 4c0604325ee9..4b9cca249828 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -18,6 +18,8 @@
 #include <linux/tty_flip.h>
 #include <linux/xarray.h>
 
+#define DRV_NAME "liteuart"
+
 /*
  * CSRs definitions (base address offsets + width)
  *
@@ -38,8 +40,8 @@
 #define OFF_EV_ENABLE	0x14
 
 /* events */
-#define EV_TX		0x1
-#define EV_RX		0x2
+#define EV_TX		BIT(0)
+#define EV_RX		BIT(1)
 
 struct liteuart_port {
 	struct uart_port port;
@@ -57,7 +59,7 @@ static struct console liteuart_console;
 
 static struct uart_driver liteuart_driver = {
 	.owner = THIS_MODULE,
-	.driver_name = "liteuart",
+	.driver_name = DRV_NAME,
 	.dev_name = "ttyLXU",
 	.major = 0,
 	.minor = 0,
@@ -122,6 +124,7 @@ static unsigned int liteuart_get_mctrl(struct uart_port *port)
 
 static void liteuart_stop_tx(struct uart_port *port)
 {
+	/* not used in LiteUART, but called unconditionally from serial_core */
 }
 
 static void liteuart_start_tx(struct uart_port *port)
@@ -154,11 +157,6 @@ static void liteuart_stop_rx(struct uart_port *port)
 	del_timer(&uart->timer);
 }
 
-static void liteuart_break_ctl(struct uart_port *port, int break_state)
-{
-	/* LiteUART doesn't support sending break signal */
-}
-
 static int liteuart_startup(struct uart_port *port)
 {
 	struct liteuart_port *uart = to_liteuart_port(port);
@@ -197,15 +195,6 @@ static const char *liteuart_type(struct uart_port *port)
 	return "liteuart";
 }
 
-static void liteuart_release_port(struct uart_port *port)
-{
-}
-
-static int liteuart_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
 static void liteuart_config_port(struct uart_port *port, int flags)
 {
 	/*
@@ -232,13 +221,10 @@ static const struct uart_ops liteuart_ops = {
 	.stop_tx	= liteuart_stop_tx,
 	.start_tx	= liteuart_start_tx,
 	.stop_rx	= liteuart_stop_rx,
-	.break_ctl	= liteuart_break_ctl,
 	.startup	= liteuart_startup,
 	.shutdown	= liteuart_shutdown,
 	.set_termios	= liteuart_set_termios,
 	.type		= liteuart_type,
-	.release_port	= liteuart_release_port,
-	.request_port	= liteuart_request_port,
 	.config_port	= liteuart_config_port,
 	.verify_port	= liteuart_verify_port,
 };
@@ -280,9 +266,7 @@ static int liteuart_probe(struct platform_device *pdev)
 	port->iotype = UPIO_MEM;
 	port->flags = UPF_BOOT_AUTOCONF;
 	port->ops = &liteuart_ops;
-	port->regshift = 2;
 	port->fifosize = 16;
-	port->iobase = 1;
 	port->type = PORT_UNKNOWN;
 	port->line = dev_id;
 	spin_lock_init(&port->lock);
@@ -322,7 +306,7 @@ static struct platform_driver liteuart_platform_driver = {
 	.probe = liteuart_probe,
 	.remove = liteuart_remove,
 	.driver = {
-		.name = "liteuart",
+		.name = DRV_NAME,
 		.of_match_table = liteuart_of_match,
 	},
 };
@@ -368,7 +352,7 @@ static int liteuart_console_setup(struct console *co, char *options)
 }
 
 static struct console liteuart_console = {
-	.name = "liteuart",
+	.name = DRV_NAME,
 	.write = liteuart_console_write,
 	.device = uart_console_device,
 	.setup = liteuart_console_setup,
@@ -416,12 +400,10 @@ static int __init liteuart_init(void)
 		return res;
 
 	res = platform_driver_register(&liteuart_platform_driver);
-	if (res) {
+	if (res)
 		uart_unregister_driver(&liteuart_driver);
-		return res;
-	}
 
-	return 0;
+	return res;
 }
 
 static void __exit liteuart_exit(void)
-- 
2.37.3


  reply	other threads:[~2022-11-07 17:15 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-07 17:14 [PATCH v1 0/3] serial: liteuart: add IRQ support Gabriel Somlo
2022-11-07 17:14 ` Gabriel Somlo [this message]
2022-11-09 12:07   ` [PATCH v1 1/3] serial: liteuart: cosmetic changes Greg KH
2022-11-07 17:14 ` [PATCH v1 2/3] serial: liteuart: separate RX loop from poll timer Gabriel Somlo
2022-11-10  1:09   ` Joel Stanley
2022-11-11 17:06     ` Gabriel L. Somlo
2022-11-07 17:15 ` [PATCH v1 3/3] serial: liteuart: add IRQ support Gabriel Somlo
2022-11-10  1:08   ` Joel Stanley
2022-11-12 21:00     ` Gabriel L. Somlo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221107171500.2537938-2-gsomlo@gmail.com \
    --to=gsomlo@gmail.com \
    --cc=david.abdurachmanov@sifive.com \
    --cc=florent@enjoy-digital.fr \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=joel@jms.id.au \
    --cc=kgugala@antmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mholenko@antmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®