From: shravan kumar <shravan.chippa@microchip.com>
To: <paul.j.murphy@intel.com>, <daniele.alessandrelli@intel.com>,
<mchehab@kernel.org>
Cc: <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
"Shravan Chippa" <shravan.chippa@microchip.com>,
Jacopo Mondi <jacopo@jmondi.org>,
Sakari Ailus <sakari.ailus@iki.fi>
Subject: [PATCH v5 0/6] media: i2c: imx334: support lower bandwidth mode
Date: Fri, 25 Nov 2022 10:38:01 +0530 [thread overview]
Message-ID: <20221125050807.1857479-1-shravan.chippa@microchip.com> (raw)
From: Shravan Chippa <shravan.chippa@microchip.com>
Hi
This patch series is for imx334 sensor driver support for lower bandwidth
Some platforms may not be capable of supporting the bandwidth
required for 12 bit or 3840x2160@60 resolutions.
Add support for dynamically selecting 10 bit and 1920x1080@30
resolutions while leaving the existing configuration as default
Sorry for taking dealy to send updated the series
as i need to check the impact of my patch on 3840x2160@60 resolutions
V4 -> V5
-Added 5 more patchs as per the review comments witch has below updates
-Updated 1782000000Mbps link frequency for 3840x2160@60 as per the mode
values
-Updated 1782000000Mbps link frequency in dt-bindings also
-Updated 3840x2160@60 mode array with default(reset) values
-Updated hblank __v4l2_ctrl_s_ctrl() to __v4l2_ctrl_modify_range()
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
-Current mode update only when we try to set V4L2_SUBDEV_FORMAT_ACTIVE
-Added link frequency (891000000Mbps) and pixel rate (74250000) to
1920x1080@30 mode
Suggested-by: Sakari Ailus <sakari.ailus@iki.fi>
-Updated commit message
V3 -> V4
- Make the 12 bit and 3840x2160 as default
- Set bus code SRGGB12 if set format fails
V2 -> V3
- Fixed the warning reported by kernel test robot
V1 -> V2
- Addressed the review comment given by Jacopo Mondi,
Which has bug in imx334_enum_frame_size() loop function,
- Renamed array codes[] to imx334_mbus_codes[]
- Modified supported_modes[] to get higher resolution first
Shravan Chippa (6):
dt-bindings: imx334: modify link frequency in examples
media: i2c: imx334: modify link frequency as for the configureation
media: i2c: imx334: hblank set function modify
media: i2c: imx334: add default values in 3840x2160@60 array
media: i2c: imx334: support lower bandwidth mode
media: i2c: imx334: updating pixel and link frequency
.../bindings/media/i2c/sony,imx334.yaml | 2 +-
drivers/media/i2c/imx334.c | 338 ++++++++++++++++--
2 files changed, 311 insertions(+), 29 deletions(-)
--
2.34.1
next reply other threads:[~2022-11-25 5:08 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-25 5:08 shravan kumar [this message]
2022-11-25 5:08 ` [PATCH v5 1/6] dt-bindings: imx334: modify link frequency in examples shravan kumar
2022-11-25 15:55 ` Sakari Ailus
2022-11-26 10:51 ` shravan kumar
2022-11-26 14:52 ` Sakari Ailus
2022-11-25 5:08 ` [PATCH v5 2/6] media: i2c: imx334: modify link frequency as for the configureation shravan kumar
2022-11-25 5:08 ` [PATCH v5 3/6] media: i2c: imx334: hblank set function modify shravan kumar
2022-11-25 15:58 ` Sakari Ailus
2022-11-25 5:08 ` [PATCH v5 4/6] media: i2c: imx334: add default values in 3840x2160@60 array shravan kumar
2022-11-25 16:02 ` Sakari Ailus
2022-11-26 10:58 ` shravan kumar
2022-11-25 5:08 ` [PATCH v5 5/6] media: i2c: imx334: support lower bandwidth mode shravan kumar
2022-11-25 16:15 ` Sakari Ailus
2022-11-25 5:08 ` [PATCH v5 6/6] media: i2c: imx334: updating pixel and link frequency shravan kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221125050807.1857479-1-shravan.chippa@microchip.com \
--to=shravan.chippa@microchip.com \
--cc=daniele.alessandrelli@intel.com \
--cc=jacopo@jmondi.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=paul.j.murphy@intel.com \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®