From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: tal albo <talbo@habana.ai>
Subject: [PATCH 01/26] habanalabs/gaudi2: fix BMON 3rd address range
Date: Thu, 8 Dec 2022 17:13:25 +0200 [thread overview]
Message-ID: <20221208151350.1833823-1-ogabbay@kernel.org> (raw)
From: tal albo <talbo@habana.ai>
Fix programming incorrect value of address range
Signed-off-by: tal albo <talbo@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c b/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c
index 56c6ab692482..1df7a59e4101 100644
--- a/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c
+++ b/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c
@@ -2376,10 +2376,10 @@ static int gaudi2_config_bmon(struct hl_device *hdev, struct hl_debug_params *pa
WREG32(base_reg + mmBMON_ADDRH_S2_OFFSET, upper_32_bits(input->start_addr2));
WREG32(base_reg + mmBMON_ADDRL_E2_OFFSET, lower_32_bits(input->end_addr2));
WREG32(base_reg + mmBMON_ADDRH_E2_OFFSET, upper_32_bits(input->end_addr2));
- WREG32(base_reg + mmBMON_ADDRL_S3_OFFSET, lower_32_bits(input->start_addr2));
- WREG32(base_reg + mmBMON_ADDRH_S3_OFFSET, upper_32_bits(input->start_addr2));
- WREG32(base_reg + mmBMON_ADDRL_E3_OFFSET, lower_32_bits(input->end_addr2));
- WREG32(base_reg + mmBMON_ADDRH_E3_OFFSET, upper_32_bits(input->end_addr2));
+ WREG32(base_reg + mmBMON_ADDRL_S3_OFFSET, lower_32_bits(input->start_addr3));
+ WREG32(base_reg + mmBMON_ADDRH_S3_OFFSET, upper_32_bits(input->start_addr3));
+ WREG32(base_reg + mmBMON_ADDRL_E3_OFFSET, lower_32_bits(input->end_addr3));
+ WREG32(base_reg + mmBMON_ADDRH_E3_OFFSET, upper_32_bits(input->end_addr3));
WREG32(base_reg + mmBMON_IDL_OFFSET, 0x0);
WREG32(base_reg + mmBMON_IDH_OFFSET, 0x0);
--
2.25.1
next reply other threads:[~2022-12-08 15:14 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-08 15:13 Oded Gabbay [this message]
2022-12-08 15:13 ` [PATCH 02/26] habanalabs: read binning info from preboot Oded Gabbay
2022-12-08 15:13 ` [PATCH 03/26] habanalabs: remove releasing of user threads from device release Oded Gabbay
2022-12-08 15:13 ` [PATCH 04/26] habanalabs: abort waiting user threads upon error Oded Gabbay
2022-12-08 15:13 ` [PATCH 05/26] habanalabs: don't notify user about clk throttling due to power Oded Gabbay
2022-12-08 15:13 ` [PATCH 06/26] habanalabs: don't allow user to destroy CB handle more than once Oded Gabbay
2022-12-08 15:13 ` [PATCH 07/26] habanalabs: use dev_dbg() when hl_mmap_mem_buf_get() fails Oded Gabbay
2022-12-08 15:13 ` [PATCH 08/26] habanalabs: make set_dram_properties an ASIC function Oded Gabbay
2022-12-08 15:13 ` [PATCH 09/26] habanalabs: fix double assignment in MMU V1 Oded Gabbay
2022-12-08 15:13 ` [PATCH 10/26] habanalabs: update DRAM props according to preboot data Oded Gabbay
2022-12-08 15:13 ` [PATCH 11/26] habanalabs/gaudi2: count interrupt causes Oded Gabbay
2022-12-08 15:13 ` [PATCH 12/26] habanalabs/gaudi2: remove duplicated event prints Oded Gabbay
2022-12-08 15:13 ` [PATCH 13/26] habanalabs: adjacent timestamps should be more accurate Oded Gabbay
2022-12-08 15:13 ` [PATCH 14/26] habanalabs: skip device idle check in hpriv_release if in reset Oded Gabbay
2022-12-08 15:13 ` [PATCH 15/26] habanalabs/gaudi2: support abrupt device reset event Oded Gabbay
2022-12-08 15:13 ` [PATCH 16/26] habanalabs: define traces for COMMS protocol Oded Gabbay
2022-12-08 15:13 ` [PATCH 17/26] habanalabs: trace " Oded Gabbay
2022-12-08 15:13 ` [PATCH 18/26] habanalabs: set log level for descriptor validation to debug Oded Gabbay
2022-12-08 15:13 ` [PATCH 19/26] habanalabs: remove support to export dmabuf from handle Oded Gabbay
2022-12-08 15:13 ` [PATCH 20/26] habanalabs: helper function to validate export params Oded Gabbay
2022-12-08 15:13 ` [PATCH 21/26] habanalabs: modify export dmabuf API Oded Gabbay
2022-12-08 15:13 ` [PATCH 22/26] habanalabs: fix dmabuf to export only required size Oded Gabbay
2022-12-08 15:13 ` [PATCH 23/26] habanalabs: fix handling of wait CS for interrupting signals Oded Gabbay
2022-12-08 15:13 ` [PATCH 24/26] habanalabs: put fences in case of unexpected wait status Oded Gabbay
2022-12-08 15:13 ` [PATCH 25/26] habanalabs/gaudi2: wait for preboot ready if HW state is dirty Oded Gabbay
2022-12-08 15:13 ` [PATCH 26/26] habanalabs: fix wrong variable type used for vzalloc Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221208151350.1833823-1-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=talbo@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®