mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Tomer Tayar <ttayar@habana.ai>
Subject: [PATCH 23/26] habanalabs: fix handling of wait CS for interrupting signals
Date: Thu,  8 Dec 2022 17:13:47 +0200	[thread overview]
Message-ID: <20221208151350.1833823-23-ogabbay@kernel.org> (raw)
In-Reply-To: <20221208151350.1833823-1-ogabbay@kernel.org>

From: Tomer Tayar <ttayar@habana.ai>

The -ERESTARTSYS return value is not handled correctly when a signal is
received while waiting for CS completion.
This can lead to bad output values to user when waiting for a single CS
completion, and more severe, it can cause a non-stopping loop when
waiting to multi-CS completion and until a CS timeout.

Fix the handling and exit the waiting if this return value is received.

Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
 .../misc/habanalabs/common/command_submission.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c
index cf3b82efc65c..0ec8cdcbb1f5 100644
--- a/drivers/misc/habanalabs/common/command_submission.c
+++ b/drivers/misc/habanalabs/common/command_submission.c
@@ -2590,7 +2590,9 @@ static int hl_wait_for_fence(struct hl_ctx *ctx, u64 seq, struct hl_fence *fence
 		*status = CS_WAIT_STATUS_BUSY;
 	}
 
-	if (error == -ETIMEDOUT || error == -EIO)
+	if (completion_rc == -ERESTARTSYS)
+		rc = completion_rc;
+	else if (error == -ETIMEDOUT || error == -EIO)
 		rc = error;
 
 	return rc;
@@ -2849,6 +2851,9 @@ static int hl_wait_multi_cs_completion(struct multi_cs_data *mcs_data,
 	if (completion_rc > 0)
 		mcs_data->timestamp = mcs_compl->timestamp;
 
+	if (completion_rc == -ERESTARTSYS)
+		return completion_rc;
+
 	mcs_data->wait_status = completion_rc;
 
 	return 0;
@@ -2994,15 +2999,15 @@ static int hl_multi_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data)
 free_seq_arr:
 	kfree(cs_seq_arr);
 
-	if (rc)
-		return rc;
-
-	if (mcs_data.wait_status == -ERESTARTSYS) {
+	if (rc == -ERESTARTSYS) {
 		dev_err_ratelimited(hdev->dev,
 				"user process got signal while waiting for Multi-CS\n");
-		return -EINTR;
+		rc = -EINTR;
 	}
 
+	if (rc)
+		return rc;
+
 	/* update output args */
 	memset(args, 0, sizeof(*args));
 
-- 
2.25.1


  parent reply	other threads:[~2022-12-08 15:15 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-08 15:13 [PATCH 01/26] habanalabs/gaudi2: fix BMON 3rd address range Oded Gabbay
2022-12-08 15:13 ` [PATCH 02/26] habanalabs: read binning info from preboot Oded Gabbay
2022-12-08 15:13 ` [PATCH 03/26] habanalabs: remove releasing of user threads from device release Oded Gabbay
2022-12-08 15:13 ` [PATCH 04/26] habanalabs: abort waiting user threads upon error Oded Gabbay
2022-12-08 15:13 ` [PATCH 05/26] habanalabs: don't notify user about clk throttling due to power Oded Gabbay
2022-12-08 15:13 ` [PATCH 06/26] habanalabs: don't allow user to destroy CB handle more than once Oded Gabbay
2022-12-08 15:13 ` [PATCH 07/26] habanalabs: use dev_dbg() when hl_mmap_mem_buf_get() fails Oded Gabbay
2022-12-08 15:13 ` [PATCH 08/26] habanalabs: make set_dram_properties an ASIC function Oded Gabbay
2022-12-08 15:13 ` [PATCH 09/26] habanalabs: fix double assignment in MMU V1 Oded Gabbay
2022-12-08 15:13 ` [PATCH 10/26] habanalabs: update DRAM props according to preboot data Oded Gabbay
2022-12-08 15:13 ` [PATCH 11/26] habanalabs/gaudi2: count interrupt causes Oded Gabbay
2022-12-08 15:13 ` [PATCH 12/26] habanalabs/gaudi2: remove duplicated event prints Oded Gabbay
2022-12-08 15:13 ` [PATCH 13/26] habanalabs: adjacent timestamps should be more accurate Oded Gabbay
2022-12-08 15:13 ` [PATCH 14/26] habanalabs: skip device idle check in hpriv_release if in reset Oded Gabbay
2022-12-08 15:13 ` [PATCH 15/26] habanalabs/gaudi2: support abrupt device reset event Oded Gabbay
2022-12-08 15:13 ` [PATCH 16/26] habanalabs: define traces for COMMS protocol Oded Gabbay
2022-12-08 15:13 ` [PATCH 17/26] habanalabs: trace " Oded Gabbay
2022-12-08 15:13 ` [PATCH 18/26] habanalabs: set log level for descriptor validation to debug Oded Gabbay
2022-12-08 15:13 ` [PATCH 19/26] habanalabs: remove support to export dmabuf from handle Oded Gabbay
2022-12-08 15:13 ` [PATCH 20/26] habanalabs: helper function to validate export params Oded Gabbay
2022-12-08 15:13 ` [PATCH 21/26] habanalabs: modify export dmabuf API Oded Gabbay
2022-12-08 15:13 ` [PATCH 22/26] habanalabs: fix dmabuf to export only required size Oded Gabbay
2022-12-08 15:13 ` Oded Gabbay [this message]
2022-12-08 15:13 ` [PATCH 24/26] habanalabs: put fences in case of unexpected wait status Oded Gabbay
2022-12-08 15:13 ` [PATCH 25/26] habanalabs/gaudi2: wait for preboot ready if HW state is dirty Oded Gabbay
2022-12-08 15:13 ` [PATCH 26/26] habanalabs: fix wrong variable type used for vzalloc Oded Gabbay

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221208151350.1833823-23-ogabbay@kernel.org \
    --to=ogabbay@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ttayar@habana.ai \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®