* [PATCH] arm64: dts: qcom: sc7280: enable IPA in sc7280-herobrine-lte-sku.dtsi
@ 2022-12-08 18:38 Alex Elder
2022-12-15 17:38 ` Sibi Sankar
0 siblings, 1 reply; 4+ messages in thread
From: Alex Elder @ 2022-12-08 18:38 UTC (permalink / raw)
To: robh+dt, krzysztof.kozlowski+dt, andersson, konrad.dybcio, agross
Cc: elder, linux-arm-msm, devicetree, linux-kernel
IPA is only needed on a platform if it includes a modem, and not all
SC7280 SoC variants do. The file "sc7280-herobrine-lte-sku.dtsi" is
used to encapsulate definitions related to Chrome OS SC7280 devices
where a modem is present, and that's the proper place for the IPA
node to be enabled.
Currently IPA is enabled in "sc7280-idp.dtsi", which is included by
DTS files for Qualcomm reference platforms (all of which include the
modem). That also includes "sc7280-herobrine-lte-sku.dtsi", so
enabling IPA there would make it unnecessary for "sc7280-idp.dtsi"
to enable it.
The only other place IPA is enabled is "sc7280-qcard.dtsi".
That file is included only by "sc7280-herobrine.dtsi", which
is (eventually) included only by these top-level DTS files:
sc7280-herobrine-crd.dts
sc7280-herobrine-herobrine-r1.dts
sc7280-herobrine-evoker.dts
sc7280-herobrine-evoker-lte.dts
sc7280-herobrine-villager-r0.dts
sc7280-herobrine-villager-r1.dts
sc7280-herobrine-villager-r1-lte.dts
All of but two of these include "sc7280-herobrine-lte-sku.dtsi", and
for those cases, enabling IPA there means there is no need for it to
be enabled in "sc7280-qcard.dtsi".
The two remaining cases will no longer enable IPA as a result of
this change:
sc7280-herobrine-evoker.dts
sc7280-herobrine-villager-r1.dts
Both of these have "lte" counterparts, and are meant to represent
board variants that do *not* have a modem.
This is exactly the desired configuration.
Signed-off-by: Alex Elder <elder@linaro.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 5 +++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 5 -----
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 5 -----
3 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
index ad66e5e9db4ed..956708397f035 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
@@ -34,3 +34,8 @@ &remoteproc_mpss {
&rmtfs_mem {
reg = <0x0 0x9c900000 0x0 0x800000>;
};
+
+&ipa {
+ status = "okay";
+ modem-init;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index f7efb9966afd1..0ddbe7f732bd9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -376,11 +376,6 @@ &gpi_dma1 {
status = "okay";
};
-&ipa {
- status = "okay";
- modem-init;
-};
-
&lpass_cpu {
status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index df49564ae6dc1..cd6ee84b36fd4 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -336,11 +336,6 @@ vreg_bob: bob {
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
-&ipa {
- status = "okay";
- modem-init;
-};
-
&lpass_va_macro {
vdd-micb-supply = <&vreg_bob>;
};
--
2.34.1
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] arm64: dts: qcom: sc7280: enable IPA in sc7280-herobrine-lte-sku.dtsi
2022-12-08 18:38 [PATCH] arm64: dts: qcom: sc7280: enable IPA in sc7280-herobrine-lte-sku.dtsi Alex Elder
@ 2022-12-15 17:38 ` Sibi Sankar
2022-12-15 18:01 ` Konrad Dybcio
0 siblings, 1 reply; 4+ messages in thread
From: Sibi Sankar @ 2022-12-15 17:38 UTC (permalink / raw)
To: Alex Elder, robh+dt, krzysztof.kozlowski+dt, andersson,
konrad.dybcio, agross
Cc: elder, linux-arm-msm, devicetree, linux-kernel
Alex,
Thanks for the patch.
On 12/9/22 00:08, Alex Elder wrote:
> IPA is only needed on a platform if it includes a modem, and not all
> SC7280 SoC variants do. The file "sc7280-herobrine-lte-sku.dtsi" is
> used to encapsulate definitions related to Chrome OS SC7280 devices
> where a modem is present, and that's the proper place for the IPA
> node to be enabled.
>
> Currently IPA is enabled in "sc7280-idp.dtsi", which is included by
> DTS files for Qualcomm reference platforms (all of which include the
> modem). That also includes "sc7280-herobrine-lte-sku.dtsi", so
> enabling IPA there would make it unnecessary for "sc7280-idp.dtsi"
> to enable it.
>
> The only other place IPA is enabled is "sc7280-qcard.dtsi".
> That file is included only by "sc7280-herobrine.dtsi", which
> is (eventually) included only by these top-level DTS files:
> sc7280-herobrine-crd.dts
> sc7280-herobrine-herobrine-r1.dts
> sc7280-herobrine-evoker.dts
> sc7280-herobrine-evoker-lte.dts
> sc7280-herobrine-villager-r0.dts
> sc7280-herobrine-villager-r1.dts
> sc7280-herobrine-villager-r1-lte.dts
> All of but two of these include "sc7280-herobrine-lte-sku.dtsi", and
> for those cases, enabling IPA there means there is no need for it to
> be enabled in "sc7280-qcard.dtsi".
>
> The two remaining cases will no longer enable IPA as a result of
> this change:
> sc7280-herobrine-evoker.dts
> sc7280-herobrine-villager-r1.dts
> Both of these have "lte" counterparts, and are meant to represent
> board variants that do *not* have a modem.
>
> This is exactly the desired configuration.
>
> Signed-off-by: Alex Elder <elder@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 5 +++++
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 5 -----
> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 5 -----
> 3 files changed, 5 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> index ad66e5e9db4ed..956708397f035 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
> @@ -34,3 +34,8 @@ &remoteproc_mpss {
> &rmtfs_mem {
> reg = <0x0 0x9c900000 0x0 0x800000>;
> };
> +
> +&ipa {
> + status = "okay";
> + modem-init;
> +};
nit; You'll probably want to move the ipa node above remoteproc node to
maintain sorting.
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Tested-by: Sibi Sankar <quic_sibis@quicinc.com>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index f7efb9966afd1..0ddbe7f732bd9 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -376,11 +376,6 @@ &gpi_dma1 {
> status = "okay";
> };
>
> -&ipa {
> - status = "okay";
> - modem-init;
> -};
> -
> &lpass_cpu {
> status = "okay";
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
> index df49564ae6dc1..cd6ee84b36fd4 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
> @@ -336,11 +336,6 @@ vreg_bob: bob {
>
> /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
>
> -&ipa {
> - status = "okay";
> - modem-init;
> -};
> -
> &lpass_va_macro {
> vdd-micb-supply = <&vreg_bob>;
> };
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] arm64: dts: qcom: sc7280: enable IPA in sc7280-herobrine-lte-sku.dtsi
2022-12-15 17:38 ` Sibi Sankar
@ 2022-12-15 18:01 ` Konrad Dybcio
2022-12-15 18:10 ` Alex Elder
0 siblings, 1 reply; 4+ messages in thread
From: Konrad Dybcio @ 2022-12-15 18:01 UTC (permalink / raw)
To: Sibi Sankar, Alex Elder, robh+dt, krzysztof.kozlowski+dt,
andersson, agross
Cc: elder, linux-arm-msm, devicetree, linux-kernel
On 15.12.2022 18:38, Sibi Sankar wrote:
> Alex,
>
> Thanks for the patch.
>
> On 12/9/22 00:08, Alex Elder wrote:
>> IPA is only needed on a platform if it includes a modem, and not all
>> SC7280 SoC variants do. The file "sc7280-herobrine-lte-sku.dtsi" is
>> used to encapsulate definitions related to Chrome OS SC7280 devices
>> where a modem is present, and that's the proper place for the IPA
>> node to be enabled.
>>
>> Currently IPA is enabled in "sc7280-idp.dtsi", which is included by
>> DTS files for Qualcomm reference platforms (all of which include the
>> modem). That also includes "sc7280-herobrine-lte-sku.dtsi", so
>> enabling IPA there would make it unnecessary for "sc7280-idp.dtsi"
>> to enable it.
>>
>> The only other place IPA is enabled is "sc7280-qcard.dtsi".
>> That file is included only by "sc7280-herobrine.dtsi", which
>> is (eventually) included only by these top-level DTS files:
>> sc7280-herobrine-crd.dts
>> sc7280-herobrine-herobrine-r1.dts
>> sc7280-herobrine-evoker.dts
>> sc7280-herobrine-evoker-lte.dts
>> sc7280-herobrine-villager-r0.dts
>> sc7280-herobrine-villager-r1.dts
>> sc7280-herobrine-villager-r1-lte.dts
>> All of but two of these include "sc7280-herobrine-lte-sku.dtsi", and
>> for those cases, enabling IPA there means there is no need for it to
>> be enabled in "sc7280-qcard.dtsi".
>>
>> The two remaining cases will no longer enable IPA as a result of
>> this change:
>> sc7280-herobrine-evoker.dts
>> sc7280-herobrine-villager-r1.dts
>> Both of these have "lte" counterparts, and are meant to represent
>> board variants that do *not* have a modem.
>>
>> This is exactly the desired configuration.
>>
>> Signed-off-by: Alex Elder <elder@linaro.org>
>> ---
>> arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 5 +++++
>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 5 -----
>> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 5 -----
>> 3 files changed, 5 insertions(+), 10 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>> index ad66e5e9db4ed..956708397f035 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>> @@ -34,3 +34,8 @@ &remoteproc_mpss {
>> &rmtfs_mem {
>> reg = <0x0 0x9c900000 0x0 0x800000>;
>> };
>> +
>> +&ipa {
>> + status = "okay";
>> + modem-init;
>> +};
>
> nit; You'll probably want to move the ipa node above remoteproc node to
> maintain sorting.
>
> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
> Tested-by: Sibi Sankar <quic_sibis@quicinc.com>
That + please flip the property order, as we're trying to
keep status last wherever possible.
Konrad
>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> index f7efb9966afd1..0ddbe7f732bd9 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> @@ -376,11 +376,6 @@ &gpi_dma1 {
>> status = "okay";
>> };
>> -&ipa {
>> - status = "okay";
>> - modem-init;
>> -};
>> -
>> &lpass_cpu {
>> status = "okay";
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
>> index df49564ae6dc1..cd6ee84b36fd4 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
>> @@ -336,11 +336,6 @@ vreg_bob: bob {
>> /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
>> -&ipa {
>> - status = "okay";
>> - modem-init;
>> -};
>> -
>> &lpass_va_macro {
>> vdd-micb-supply = <&vreg_bob>;
>> };
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH] arm64: dts: qcom: sc7280: enable IPA in sc7280-herobrine-lte-sku.dtsi
2022-12-15 18:01 ` Konrad Dybcio
@ 2022-12-15 18:10 ` Alex Elder
0 siblings, 0 replies; 4+ messages in thread
From: Alex Elder @ 2022-12-15 18:10 UTC (permalink / raw)
To: Konrad Dybcio, Sibi Sankar, Alex Elder, robh+dt,
krzysztof.kozlowski+dt, andersson, agross
Cc: elder, linux-arm-msm, devicetree, linux-kernel
On 12/15/22 12:01 PM, Konrad Dybcio wrote:
>
>
> On 15.12.2022 18:38, Sibi Sankar wrote:
>> Alex,
>>
>> Thanks for the patch.
>>
>> On 12/9/22 00:08, Alex Elder wrote:
>>> IPA is only needed on a platform if it includes a modem, and not all
>>> SC7280 SoC variants do. The file "sc7280-herobrine-lte-sku.dtsi" is
>>> used to encapsulate definitions related to Chrome OS SC7280 devices
>>> where a modem is present, and that's the proper place for the IPA
>>> node to be enabled.
>>>
>>> Currently IPA is enabled in "sc7280-idp.dtsi", which is included by
>>> DTS files for Qualcomm reference platforms (all of which include the
>>> modem). That also includes "sc7280-herobrine-lte-sku.dtsi", so
>>> enabling IPA there would make it unnecessary for "sc7280-idp.dtsi"
>>> to enable it.
>>>
>>> The only other place IPA is enabled is "sc7280-qcard.dtsi".
>>> That file is included only by "sc7280-herobrine.dtsi", which
>>> is (eventually) included only by these top-level DTS files:
>>> sc7280-herobrine-crd.dts
>>> sc7280-herobrine-herobrine-r1.dts
>>> sc7280-herobrine-evoker.dts
>>> sc7280-herobrine-evoker-lte.dts
>>> sc7280-herobrine-villager-r0.dts
>>> sc7280-herobrine-villager-r1.dts
>>> sc7280-herobrine-villager-r1-lte.dts
>>> All of but two of these include "sc7280-herobrine-lte-sku.dtsi", and
>>> for those cases, enabling IPA there means there is no need for it to
>>> be enabled in "sc7280-qcard.dtsi".
>>>
>>> The two remaining cases will no longer enable IPA as a result of
>>> this change:
>>> sc7280-herobrine-evoker.dts
>>> sc7280-herobrine-villager-r1.dts
>>> Both of these have "lte" counterparts, and are meant to represent
>>> board variants that do *not* have a modem.
>>>
>>> This is exactly the desired configuration.
>>>
>>> Signed-off-by: Alex Elder <elder@linaro.org>
>>> ---
>>> arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi | 5 +++++
>>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 5 -----
>>> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 5 -----
>>> 3 files changed, 5 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>>> index ad66e5e9db4ed..956708397f035 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi
>>> @@ -34,3 +34,8 @@ &remoteproc_mpss {
>>> &rmtfs_mem {
>>> reg = <0x0 0x9c900000 0x0 0x800000>;
>>> };
>>> +
>>> +&ipa {
>>> + status = "okay";
>>> + modem-init;
>>> +};
>>
>> nit; You'll probably want to move the ipa node above remoteproc node to
>> maintain sorting.
>>
>> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
>> Tested-by: Sibi Sankar <quic_sibis@quicinc.com>
> That + please flip the property order, as we're trying to
> keep status last wherever possible.
Thank you, I'll post version 2 this afternoon. -Alex
>
> Konrad
>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>>> index f7efb9966afd1..0ddbe7f732bd9 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>>> @@ -376,11 +376,6 @@ &gpi_dma1 {
>>> status = "okay";
>>> };
>>> -&ipa {
>>> - status = "okay";
>>> - modem-init;
>>> -};
>>> -
>>> &lpass_cpu {
>>> status = "okay";
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
>>> index df49564ae6dc1..cd6ee84b36fd4 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
>>> @@ -336,11 +336,6 @@ vreg_bob: bob {
>>> /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
>>> -&ipa {
>>> - status = "okay";
>>> - modem-init;
>>> -};
>>> -
>>> &lpass_va_macro {
>>> vdd-micb-supply = <&vreg_bob>;
>>> };
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2022-12-15 18:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-12-08 18:38 [PATCH] arm64: dts: qcom: sc7280: enable IPA in sc7280-herobrine-lte-sku.dtsi Alex Elder
2022-12-15 17:38 ` Sibi Sankar
2022-12-15 18:01 ` Konrad Dybcio
2022-12-15 18:10 ` Alex Elder
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®