mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Manjunatha Venkatesh <manjunatha.venkatesh@nxp.com>
To: linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org,
	will@kernel.org, axboe@kernel.dk, robh+dt@kernel.org
Cc: mb@lightnvm.io, ckeepax@opensource.cirrus.com, arnd@arndb.d,
	manjunatha.venkatesh@nxp.com, mst@redhat.com, javier@javigon.com,
	mikelley@microsoft.com, jasowang@redhat.com,
	sunilmut@microsoft.com, bjorn.andersson@linaro.org,
	krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
	ashish.deshpande@nxp.com, rvmanjumce@gmail.com,
	Kwame Adwere <kwame.adwere@nxp.com>
Subject: [PATCH v6 1/2] dt-bindings: uwb: Device tree information for Nxp SR1XX SOCs
Date: Tue, 20 Dec 2022 21:17:46 +0530	[thread overview]
Message-ID: <20221220154747.2372597-2-manjunatha.venkatesh@nxp.com> (raw)
In-Reply-To: <20221220154747.2372597-1-manjunatha.venkatesh@nxp.com>

Ultra-wideband (UWB) is a short-range wireless communication protocol.

NXP has SR1XX family of UWB Subsystems (UWBS) devices. SR1XX SOCs
are FiRa Compliant. SR1XX SOCs are flash less devices and they need
Firmware Download on every device boot. More details on the SR1XX Family
can be found at https://www.nxp.com/products/:UWB-TRIMENSION

The sr1xx driver work the SR1XX Family of UWBS, and uses UWB Controller
Interface (UCI).  The corresponding details are available in the FiRa
Consortium Website (https://www.firaconsortium.org/).

Link: https://lore.kernel.org/r/425858dc-59fe-2311-61ae-3b6dc77a2576@nxp.com
Signed-off-by: Manjunatha Venkatesh <manjunatha.venkatesh@nxp.com>
Signed-off-by: Kwame Adwere <kwame.adwere@nxp.com>
---
Changes since v5:
  - Moved ioctl command definitions into header file.
  - Version 5 patch review comments addressed.
  - Corporate lawyer sign-off updated.

 .../bindings/uwb/nxp,uwb-sr1xx.yaml           | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/uwb/nxp,uwb-sr1xx.yaml

diff --git a/Documentation/devicetree/bindings/uwb/nxp,uwb-sr1xx.yaml b/Documentation/devicetree/bindings/uwb/nxp,uwb-sr1xx.yaml
new file mode 100644
index 000000000000..2a1caa661633
--- /dev/null
+++ b/Documentation/devicetree/bindings/uwb/nxp,uwb-sr1xx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/uwb/nxp,uwb-sr1xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:  NXP SR1XX SOC family of Ultra Wide Band(UWB) device bindings
+
+description: The nxp-sr1xx driver works for the NXP SR1XX series of Ultra Wide
+    Band devices namely, SR150 and SR100T devices, and uses UWB Controller Interface (UCI).
+    The corresponding details are available in the FiRa Consortium Website.
+    (https://www.firaconsortium.org/). More details on the SR1XX Family can be
+    found at https://www.nxp.com/products/:UWB-TRIMENSION
+
+maintainers:
+  - Manjunatha Venkatesh <manjunatha.venkatesh@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,sr1xx
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 45000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    /* for Raspberry Pi with pin control stuff for GPIO irq */
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    fragment@1 {
+        target = <&spi0>;
+        spi {
+            /* needed to avoid dtc warning */
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+            status = "enabled";
+
+            sr1xx: sr1xx@0 {
+                compatible = "nxp,sr1xx";
+                reg = <0>;    /* CE0 */
+                /* GPIO_24 (PIN 18) Host Irq*/
+                nxp,sr1xx-irq-gpios = <&gpio 24 0>;
+                /* GPIO_18(PIN 12) Chip Enable*/
+                nxp,sr1xx-ce-gpios = <&gpio 18 0>;
+                /* GPIO_23(PIN 16) Read Indication from Host to SR1xx*/
+                nxp,sr1xx-ri-gpios = <&gpio 23 0>;
+                /*max supported frequency */
+                spi-max-frequency = <20000000>;
+            };
+        };
+    };
-- 
2.38.1


  reply	other threads:[~2022-12-20 15:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-20 15:47 [PATCH v6 0/2]Uwb: Nxp: Driver for SR1XX SOCs Patch Series Manjunatha Venkatesh
2022-12-20 15:47 ` Manjunatha Venkatesh [this message]
2022-12-20 15:56   ` [PATCH v6 1/2] dt-bindings: uwb: Device tree information for Nxp SR1XX SOCs Krzysztof Kozlowski
2022-12-20 16:40   ` Rob Herring
2022-12-20 15:47 ` [PATCH v6 2/2] misc: nxp-sr1xx: UWB driver support for sr1xx series chip Manjunatha Venkatesh
2022-12-20 15:58   ` Krzysztof Kozlowski
2022-12-21  6:12   ` Greg KH
2023-09-25 13:51     ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221220154747.2372597-2-manjunatha.venkatesh@nxp.com \
    --to=manjunatha.venkatesh@nxp.com \
    --cc=arnd@arndb.d \
    --cc=ashish.deshpande@nxp.com \
    --cc=axboe@kernel.dk \
    --cc=bjorn.andersson@linaro.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jasowang@redhat.com \
    --cc=javier@javigon.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kwame.adwere@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mb@lightnvm.io \
    --cc=mikelley@microsoft.com \
    --cc=mst@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=rvmanjumce@gmail.com \
    --cc=sunilmut@microsoft.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®