From: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <bryan.whitehead@microchip.com>, <UNGLinuxDriver@microchip.com>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>
Subject: [PATCH net-next 2/3] net: lan743x: add generic implementation for phy interface selection
Date: Tue, 17 Jan 2023 19:46:13 +0530 [thread overview]
Message-ID: <20230117141614.4411-3-Pavithra.Sathyanarayanan@microchip.com> (raw)
In-Reply-To: <20230117141614.4411-1-Pavithra.Sathyanarayanan@microchip.com>
Add logic to read the Phy interface from MAC_CR register for LAN743x
driver.
Checks for the LAN7430/31 or pci11x1x devices and the adapter
interface is updated accordingly. For LAN7431, adapter interface is set
based on Bit 19 of MAC_CR register as MII or RGMII which removes the
forced RGMII/GMII configurations in lan743x_phy_open().
Signed-off-by: Pavithra Sathyanarayanan <Pavithra.Sathyanarayanan@microchip.com>
---
drivers/net/ethernet/microchip/lan743x_main.c | 31 ++++++++++++++-----
drivers/net/ethernet/microchip/lan743x_main.h | 1 +
2 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index c4d16f4654b5..fe3026ed6f03 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -1469,6 +1469,24 @@ static void lan743x_phy_close(struct lan743x_adapter *adapter)
netdev->phydev = NULL;
}
+static void lan743x_phy_interface_select(struct lan743x_adapter *adapter)
+{
+ u32 id_rev;
+ u32 data;
+
+ data = lan743x_csr_read(adapter, MAC_CR);
+ id_rev = adapter->csr.id_rev & ID_REV_ID_MASK_;
+
+ if (adapter->is_pci11x1x && adapter->is_sgmii_en)
+ adapter->phy_interface = PHY_INTERFACE_MODE_SGMII;
+ else if (id_rev == ID_REV_ID_LAN7430_)
+ adapter->phy_interface = PHY_INTERFACE_MODE_GMII;
+ else if ((id_rev == ID_REV_ID_LAN7431_) && (data & MAC_CR_MII_EN_))
+ adapter->phy_interface = PHY_INTERFACE_MODE_MII;
+ else
+ adapter->phy_interface = PHY_INTERFACE_MODE_RGMII;
+}
+
static int lan743x_phy_open(struct lan743x_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
@@ -1486,14 +1504,11 @@ static int lan743x_phy_open(struct lan743x_adapter *adapter)
if (!phydev)
goto return_error;
- if (adapter->is_pci11x1x)
- ret = phy_connect_direct(netdev, phydev,
- lan743x_phy_link_status_change,
- PHY_INTERFACE_MODE_RGMII);
- else
- ret = phy_connect_direct(netdev, phydev,
- lan743x_phy_link_status_change,
- PHY_INTERFACE_MODE_GMII);
+ lan743x_phy_interface_select(adapter);
+
+ ret = phy_connect_direct(netdev, phydev,
+ lan743x_phy_link_status_change,
+ adapter->phy_interface);
if (ret)
goto return_error;
}
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 8438c3dbcf36..52609fc13ad9 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -1042,6 +1042,7 @@ struct lan743x_adapter {
#define LAN743X_ADAPTER_FLAG_OTP BIT(0)
u32 flags;
u32 hw_cfg;
+ phy_interface_t phy_interface;
};
#define LAN743X_COMPONENT_FLAG_RX(channel) BIT(20 + (channel))
--
2.25.1
next prev parent reply other threads:[~2023-01-19 10:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-17 14:16 [PATCH net-next 0/3] generic implementation of phy interface and fixed_phy support for the LAN743x device Pavithra Sathyanarayanan
2023-01-17 14:16 ` [PATCH net-next 1/3] net: lan743x: remove unwanted interface select settings Pavithra Sathyanarayanan
2023-01-17 14:16 ` Pavithra Sathyanarayanan [this message]
2023-01-17 14:16 ` [PATCH net-next 3/3] net: lan743x: add fixed phy support for LAN7431 device Pavithra Sathyanarayanan
2023-01-19 13:00 ` [PATCH net-next 0/3] generic implementation of phy interface and fixed_phy support for the LAN743x device patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230117141614.4411-3-Pavithra.Sathyanarayanan@microchip.com \
--to=pavithra.sathyanarayanan@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=bryan.whitehead@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®