From: sabiya.d@mistralsolutions.com
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
linus.walleij@linaro.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Dasnavis Sabiya <sabiya.d@ti.com>
Subject: [PATCH 0/2] Add initial support for AM69 Starter Kit
Date: Thu, 19 Jan 2023 18:59:56 +0530 [thread overview]
Message-ID: <20230119132958.124435-1-sabiya.d@ti.com> (raw)
From: Dasnavis Sabiya <sabiya.d@ti.com>
AM69 Starter Kit is a single board designed based on TI's AM69 SOC
providing advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. The SOC comprises
of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs,
Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP)
and multiple vision assist accelerators, Depth and Motion Processing
Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA)
and C7x floating point vector DSP
Refer below link to AM69 Technical Reference Manual for further details:
https://www.ti.com/lit/zip/spruj52
AM69 SK supports the following interfaces:
* 32 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x3 USB 3.0 Type-A ports
* x1 USB 3.0 Type-C port
* x1 UHS-1 capable micro-SD card slot
* x4 MCAN instances
* 32 GB eMMC Flash
* 512 Mbit OSPI flash
* x2 Display connectors
* x1 PCIe M.2 M Key
* x1 PCIe M.2 E Key
* x1 4L PCIe Card Slot
* x3 CSI2 Camera interface
* 40-pin Raspberry Pi header
This patch series add initial support for AM69 Starter Kit.
Design Files can be referred from https://www.ti.com/lit/zip/SPRR466
bootlog: https://rentry.co/coyvw/raw
Dasnavis Sabiya (2):
dt-bindings: arm: ti: Add binding for AM69 Starter Kit
arch: arm64: dts: Add support for AM69 Starter Kit
.../devicetree/bindings/arm/ti/k3.yaml | 1 +
arch/arm64/boot/dts/ti/Makefile | 1 +
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 180 ++++++++++++++++++
3 files changed, 182 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am69-sk.dts
--
2.25.1
next reply other threads:[~2023-01-19 14:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-19 13:29 sabiya.d [this message]
2023-01-19 13:29 ` [PATCH 1/2] dt-bindings: arm: ti: Add binding " sabiya.d
2023-01-19 13:34 ` Krzysztof Kozlowski
2023-01-19 13:29 ` [PATCH 2/2] arch: arm64: dts: Add support " sabiya.d
2023-01-19 13:36 ` Krzysztof Kozlowski
2023-01-20 10:32 ` Vignesh Raghavendra
2023-01-23 7:28 ` Dasnavis Sabiya
2023-01-25 13:14 ` Dasnavis Sabiya
2023-01-25 14:09 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230119132958.124435-1-sabiya.d@ti.com \
--to=sabiya.d@mistralsolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=sabiya.d@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®