From: Michael Walle <michael@walle.cc>
To: "Yisen Zhuang" <yisen.zhuang@huawei.com>,
"Salil Mehta" <salil.mehta@huawei.com>,
"David S . Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Russell King" <linux@armlinux.org.uk>,
"Marek Behún" <kabel@kernel.org>, "Xu Liang" <lxu@maxlinear.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael Walle <michael@walle.cc>
Subject: [PATCH net-next 0/5] net: phy: C45-over-C22 access
Date: Fri, 20 Jan 2023 23:40:06 +0100 [thread overview]
Message-ID: <20230120224011.796097-1-michael@walle.cc> (raw)
After the c22 and c45 access split is finally merged. This can now be
posted again. The old version can be found here:
https://lore.kernel.org/netdev/20220325213518.2668832-1-michael@walle.cc/
Although all the discussion was here:
https://lore.kernel.org/netdev/20220323183419.2278676-1-michael@walle.cc/
The goal here is to get the GYP215 and LAN8814 running on the Microchip
LAN9668 SoC. The LAN9668 suppports one external bus and unfortunately, the
LAN8814 has a bug which makes it impossible to use C45 on that bus.
Fortunately, it was the intention of the GPY215 driver to be used on a C22
bus. But I think this could have never really worked, because the
phy_get_c45_ids() will always do c45 accesses and thus gpy_probe() will
fail.
Introduce C45-over-C22 support and use it if the MDIO bus doesn't support
C45. Also enable it when a PHY is promoted from C22 to C45.
Changes since RFC v2:
- Reased to latest net-next
- new check_rc argument in mmd_phy_indirect() to retain old behavior
- determine bus capabilities by bus->read and bus->read_c45
- always set phydev->c45_over_c22 if PHY is promoted
Changes since RFC v1:
- use __phy_mmd_indirect() in mdiobus_probe_mmd_read()
- add new properties has_c45 c45_over_c22 (and remove is_c45)
- drop MDIOBUS_NO_CAP handling, Andrew is preparing a series to
add probe_capabilities to mark all C45 capable MDIO bus drivers
Michael Walle (5):
net: phy: add error checks in mmd_phy_indirect() and export it
net: phy: support indirect c45 access in get_phy_c45_ids()
net: phy: add support for C45-over-C22 transfers
phy: net: introduce phy_promote_to_c45()
net: phy: mxl-gpy: remove unneeded ops
.../net/ethernet/hisilicon/hns/hns_ethtool.c | 4 +-
drivers/net/phy/bcm84881.c | 2 +-
drivers/net/phy/marvell10g.c | 2 +-
drivers/net/phy/mxl-gpy.c | 33 +-------
drivers/net/phy/phy-core.c | 48 ++++++++---
drivers/net/phy/phy.c | 6 +-
drivers/net/phy/phy_device.c | 80 ++++++++++++++++---
drivers/net/phy/phylink.c | 8 +-
include/linux/phy.h | 12 ++-
9 files changed, 128 insertions(+), 67 deletions(-)
--
2.30.2
next reply other threads:[~2023-01-20 22:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 22:40 Michael Walle [this message]
2023-01-20 22:40 ` [PATCH net-next 1/5] net: phy: add error checks in mmd_phy_indirect() and export it Michael Walle
2023-01-23 15:34 ` Andrew Lunn
2023-01-20 22:40 ` [PATCH net-next 2/5] net: phy: support indirect c45 access in get_phy_c45_ids() Michael Walle
2023-01-20 22:40 ` [PATCH net-next 3/5] net: phy: add support for C45-over-C22 transfers Michael Walle
2023-01-20 22:40 ` [PATCH net-next 4/5] phy: net: introduce phy_promote_to_c45() Michael Walle
2023-01-20 23:20 ` Russell King (Oracle)
2023-01-20 23:27 ` Michael Walle
2023-01-20 22:40 ` [PATCH net-next 5/5] net: phy: mxl-gpy: remove unneeded ops Michael Walle
2023-01-23 18:03 ` [PATCH net-next 0/5] net: phy: C45-over-C22 access Andrew Lunn
2023-01-23 18:47 ` Russell King (Oracle)
2023-01-23 20:05 ` Andrew Lunn
2023-01-24 0:35 ` Michael Walle
2023-01-24 1:44 ` Andrew Lunn
2023-01-24 14:41 ` Michael Walle
2023-01-24 21:03 ` Andrew Lunn
2023-01-24 21:20 ` Michael Walle
2023-01-25 13:52 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230120224011.796097-1-michael@walle.cc \
--to=michael@walle.cc \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lxu@maxlinear.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=salil.mehta@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®