From: Michael Walle <michael@walle.cc>
To: "Yisen Zhuang" <yisen.zhuang@huawei.com>,
"Salil Mehta" <salil.mehta@huawei.com>,
"David S . Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Russell King" <linux@armlinux.org.uk>,
"Marek Behún" <kabel@kernel.org>, "Xu Liang" <lxu@maxlinear.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael Walle <michael@walle.cc>
Subject: [PATCH net-next 5/5] net: phy: mxl-gpy: remove unneeded ops
Date: Fri, 20 Jan 2023 23:40:11 +0100 [thread overview]
Message-ID: <20230120224011.796097-6-michael@walle.cc> (raw)
In-Reply-To: <20230120224011.796097-1-michael@walle.cc>
Now that we have proper c45-over-c22 support and the PHY driver promote
the PHY to a C45 device, we can drop the ops because the core will
already call them.
Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/net/phy/mxl-gpy.c | 24 ------------------------
1 file changed, 24 deletions(-)
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index 4dc1093dbdc1..043c084a8a16 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -799,13 +799,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY2xx),
.name = "Maxlinear Ethernet GPY2xx",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -817,13 +815,11 @@ static struct phy_driver gpy_drivers[] = {
.phy_id = PHY_ID_GPY115B,
.phy_id_mask = PHY_ID_GPYx15B_MASK,
.name = "Maxlinear Ethernet GPY115B",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -834,13 +830,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY115C),
.name = "Maxlinear Ethernet GPY115C",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -852,13 +846,11 @@ static struct phy_driver gpy_drivers[] = {
.phy_id = PHY_ID_GPY211B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY211B",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -869,13 +861,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY211C),
.name = "Maxlinear Ethernet GPY211C",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -887,13 +877,11 @@ static struct phy_driver gpy_drivers[] = {
.phy_id = PHY_ID_GPY212B,
.phy_id_mask = PHY_ID_GPY21xB_MASK,
.name = "Maxlinear Ethernet GPY212B",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -904,13 +892,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY212C),
.name = "Maxlinear Ethernet GPY212C",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -922,13 +908,11 @@ static struct phy_driver gpy_drivers[] = {
.phy_id = PHY_ID_GPY215B,
.phy_id_mask = PHY_ID_GPYx15B_MASK,
.name = "Maxlinear Ethernet GPY215B",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -939,13 +923,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY215C),
.name = "Maxlinear Ethernet GPY215C",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -956,13 +938,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY241B),
.name = "Maxlinear Ethernet GPY241B",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -973,13 +953,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY241BM),
.name = "Maxlinear Ethernet GPY241BM",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
@@ -990,13 +968,11 @@ static struct phy_driver gpy_drivers[] = {
{
PHY_ID_MATCH_MODEL(PHY_ID_GPY245B),
.name = "Maxlinear Ethernet GPY245B",
- .get_features = genphy_c45_pma_read_abilities,
.config_init = gpy_config_init,
.probe = gpy_probe,
.suspend = genphy_suspend,
.resume = genphy_resume,
.config_aneg = gpy_config_aneg,
- .aneg_done = genphy_c45_aneg_done,
.read_status = gpy_read_status,
.config_intr = gpy_config_intr,
.handle_interrupt = gpy_handle_interrupt,
--
2.30.2
next prev parent reply other threads:[~2023-01-20 22:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 22:40 [PATCH net-next 0/5] net: phy: C45-over-C22 access Michael Walle
2023-01-20 22:40 ` [PATCH net-next 1/5] net: phy: add error checks in mmd_phy_indirect() and export it Michael Walle
2023-01-23 15:34 ` Andrew Lunn
2023-01-20 22:40 ` [PATCH net-next 2/5] net: phy: support indirect c45 access in get_phy_c45_ids() Michael Walle
2023-01-20 22:40 ` [PATCH net-next 3/5] net: phy: add support for C45-over-C22 transfers Michael Walle
2023-01-20 22:40 ` [PATCH net-next 4/5] phy: net: introduce phy_promote_to_c45() Michael Walle
2023-01-20 23:20 ` Russell King (Oracle)
2023-01-20 23:27 ` Michael Walle
2023-01-20 22:40 ` Michael Walle [this message]
2023-01-23 18:03 ` [PATCH net-next 0/5] net: phy: C45-over-C22 access Andrew Lunn
2023-01-23 18:47 ` Russell King (Oracle)
2023-01-23 20:05 ` Andrew Lunn
2023-01-24 0:35 ` Michael Walle
2023-01-24 1:44 ` Andrew Lunn
2023-01-24 14:41 ` Michael Walle
2023-01-24 21:03 ` Andrew Lunn
2023-01-24 21:20 ` Michael Walle
2023-01-25 13:52 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230120224011.796097-6-michael@walle.cc \
--to=michael@walle.cc \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lxu@maxlinear.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=salil.mehta@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®