From: Ian Rogers <irogers@google.com>
To: Josh Poimboeuf <jpoimboe@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Nathan Chancellor <nathan@kernel.org>,
Nick Desaulniers <ndesaulniers@google.com>,
Tom Rix <trix@redhat.com>, Masahiro Yamada <masahiroy@kernel.org>,
Nicolas Schier <nicolas@fjasle.eu>,
linux-kernel@vger.kernel.org, llvm@lists.linux.dev
Cc: Stephane Eranian <eranian@google.com>,
Andrii Nakryiko <andrii@kernel.org>, Jiri Olsa <jolsa@kernel.org>,
Arnaldo Carvalho de Melo <acme@kernel.org>,
Namhyung Kim <namhyung@kernel.org>,
Ian Rogers <irogers@google.com>
Subject: [PATCH v4 3/3] objtool: Alter how HOSTCC is forced
Date: Thu, 26 Jan 2023 11:06:06 -0800 [thread overview]
Message-ID: <20230126190606.40739-4-irogers@google.com> (raw)
In-Reply-To: <20230126190606.40739-1-irogers@google.com>
HOSTCC is always wanted when building objtool. Setting CC to HOSTCC
happens after tools/scripts/Makefile.include is included, meaning
flags (like CFLAGS) are set assuming say CC is gcc, but then it can be
later set to HOSTCC which may be clang. tools/scripts/Makefile.include
is needed for host set up and common macros in objtool's
Makefile. Rather than override the CC variable to HOSTCC, just pass CC
as HOSTCC to the sub-makes of Makefile.build, the libsubcmd builds and
also to the linkage step.
Signed-off-by: Ian Rogers <irogers@google.com>
---
tools/objtool/Makefile | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/tools/objtool/Makefile b/tools/objtool/Makefile
index f0651eac06e6..bbf8ec440430 100644
--- a/tools/objtool/Makefile
+++ b/tools/objtool/Makefile
@@ -2,11 +2,6 @@
include ../scripts/Makefile.include
include ../scripts/Makefile.arch
-# always use the host compiler
-AR = $(HOSTAR)
-CC = $(HOSTCC)
-LD = $(HOSTLD)
-
ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(CURDIR)))
srctree := $(patsubst %/,%,$(dir $(srctree)))
@@ -34,13 +29,18 @@ INCLUDES := -I$(srctree)/tools/include \
-I$(srctree)/tools/objtool/include \
-I$(srctree)/tools/objtool/arch/$(SRCARCH)/include \
-I$(LIBSUBCMD_OUTPUT)/include
+# Note, EXTRA_WARNINGS here was determined for CC and not HOSTCC, it
+# is passed here to match a legacy behavior.
WARNINGS := $(EXTRA_WARNINGS) -Wno-switch-default -Wno-switch-enum -Wno-packed -Wno-nested-externs
-CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
-LDFLAGS += $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
+OBJTOOL_CFLAGS := -Werror $(WARNINGS) $(KBUILD_HOSTCFLAGS) -g $(INCLUDES) $(LIBELF_FLAGS)
+OBJTOOL_LDFLAGS := $(LIBELF_LIBS) $(LIBSUBCMD) $(KBUILD_HOSTLDFLAGS)
# Allow old libelf to be used:
elfshdr := $(shell echo '$(pound)include <libelf.h>' | $(CC) $(CFLAGS) -x c -E - | grep elf_getshdr)
-CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+OBJTOOL_CFLAGS += $(if $(elfshdr),,-DLIBELF_USE_DEPRECATED)
+
+# Always want host compilation.
+HOST_OVERRIDES := CC="$(HOSTCC)" LD="$(HOSTLD)" AR="$(HOSTAR)"
AWK = awk
MKDIR = mkdir
@@ -63,10 +63,12 @@ include $(srctree)/tools/build/Makefile.include
$(OBJTOOL_IN): fixdep FORCE
$(Q)$(CONFIG_SHELL) ./sync-check.sh
- $(Q)$(MAKE) $(build)=objtool
+ $(Q)$(MAKE) $(build)=objtool $(HOST_OVERRIDES) CFLAGS="$(OBJTOOL_CFLAGS)" \
+ LDFLAGS="$(OBJTOOL_LDFLAGS)"
+
$(OBJTOOL): $(LIBSUBCMD) $(OBJTOOL_IN)
- $(QUIET_LINK)$(CC) $(OBJTOOL_IN) $(LDFLAGS) -o $@
+ $(QUIET_LINK)$(HOSTCC) $(OBJTOOL_IN) $(OBJTOOL_LDFLAGS) -o $@
$(LIBSUBCMD_OUTPUT):
@@ -75,6 +77,7 @@ $(LIBSUBCMD_OUTPUT):
$(LIBSUBCMD): fixdep FORCE $(LIBSUBCMD_OUTPUT)
$(Q)$(MAKE) -C $(LIBSUBCMD_DIR) O=$(LIBSUBCMD_OUTPUT) \
DESTDIR=$(LIBSUBCMD_OUTPUT) prefix= subdir= \
+ $(HOST_OVERRIDES) EXTRA_CFLAGS="$(OBJTOOL_CFLAGS)" \
$@ install_headers
$(LIBSUBCMD)-clean:
--
2.39.1.456.gfc5497dd1b-goog
next prev parent reply other threads:[~2023-01-26 19:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 19:06 [PATCH v4 0/3] objtool build improvements Ian Rogers
2023-01-26 19:06 ` [PATCH v4 1/3] objtool: Install libsubcmd in build Ian Rogers
2023-02-01 16:26 ` [tip: objtool/core] " tip-bot2 for Ian Rogers
2023-01-26 19:06 ` [PATCH v4 2/3] objtool: Properly support make V=1 Ian Rogers
2023-02-01 16:26 ` [tip: objtool/core] " tip-bot2 for Ian Rogers
2023-01-26 19:06 ` Ian Rogers [this message]
2023-02-01 16:26 ` [tip: objtool/core] objtool: Fix HOSTCC flag usage tip-bot2 for Ian Rogers
2023-02-01 17:02 ` Mark Rutland
2023-02-01 17:36 ` Josh Poimboeuf
2023-02-03 18:25 ` Vladimir Oltean
2023-02-04 17:05 ` Josh Poimboeuf
2023-02-04 21:21 ` Ian Rogers
2023-02-04 10:17 ` tip-bot2 for Ian Rogers
2024-04-20 22:43 ` [PATCH v4 3/3] objtool: Alter how HOSTCC is forced Tan Nayir
2023-01-26 19:34 ` [PATCH v4 0/3] objtool build improvements Josh Poimboeuf
2023-01-31 0:25 ` Josh Poimboeuf
2023-01-31 0:31 ` Ian Rogers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230126190606.40739-4-irogers@google.com \
--to=irogers@google.com \
--cc=acme@kernel.org \
--cc=andrii@kernel.org \
--cc=eranian@google.com \
--cc=jolsa@kernel.org \
--cc=jpoimboe@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=llvm@lists.linux.dev \
--cc=masahiroy@kernel.org \
--cc=namhyung@kernel.org \
--cc=nathan@kernel.org \
--cc=ndesaulniers@google.com \
--cc=nicolas@fjasle.eu \
--cc=peterz@infradead.org \
--cc=trix@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®