From: "Paul E. McKenney" <paulmck@kernel.org>
To: tglx@linutronix.de
Cc: linux-kernel@vger.kernel.org, john.stultz@linaro.org,
sboyd@kernel.org, corbet@lwn.net, Mark.Rutland@arm.com,
maz@kernel.org, kernel-team@meta.com, neeraju@codeaurora.org,
ak@linux.intel.com, feng.tang@intel.com, zhengjun.xing@intel.com,
longman@redhat.com
Subject: PATCH v2 clocksource 8/7] clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
Date: Thu, 2 Feb 2023 20:36:58 -0800 [thread overview]
Message-ID: <20230203043658.GA1513624@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <20230125002708.GA1471122@paulmck-ThinkPad-P17-Gen-1>
Unconditionally enabling TSC watchdog checking of the HPET and PMTMR
clocksources can degrade latency and performance. Therefore, provide
a new "watchdog" option to the tsc= boot parameter that opts into such
checking. Note that tsc=watchdog is overridden by a tsc=nowatchdog
regardless of their relative positions in the list of boot parameters.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 95f0d104c2322..7b4df6d89d3c3 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -6373,6 +6373,12 @@
(HPET or PM timer) on systems whose TSC frequency was
obtained from HW or FW using either an MSR or CPUID(0x15).
Warn if the difference is more than 500 ppm.
+ [x86] watchdog: Use TSC as the watchdog clocksource with
+ which to check other HW timers (HPET or PM timer), but
+ only on systems where TSC has been deemed trustworthy.
+ This will be suppressed by an earlier tsc=nowatchdog and
+ can be overridden by a later tsc=nowatchdog. A console
+ message will flag any such suppression or overriding.
tsc_early_khz= [X86] Skip early TSC calibration and use the given
value instead. Useful when the early TSC frequency discovery
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index a5371c6d4b64b..306c233c98d84 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -294,6 +294,7 @@ __setup("notsc", notsc_setup);
static int no_sched_irq_time;
static int no_tsc_watchdog;
+static int tsc_as_watchdog;
static int __init tsc_setup(char *str)
{
@@ -303,10 +304,22 @@ static int __init tsc_setup(char *str)
no_sched_irq_time = 1;
if (!strcmp(str, "unstable"))
mark_tsc_unstable("boot parameter");
- if (!strcmp(str, "nowatchdog"))
+ if (!strcmp(str, "nowatchdog")) {
no_tsc_watchdog = 1;
+ if (tsc_as_watchdog)
+ pr_alert("%s: Overriding earlier tsc=watchdog with tsc=nowatchdog\n",
+ __func__);
+ tsc_as_watchdog = 0;
+ }
if (!strcmp(str, "recalibrate"))
tsc_force_recalibrate = 1;
+ if (!strcmp(str, "watchdog")) {
+ if (no_tsc_watchdog)
+ pr_alert("%s: tsc=watchdog overridden by earlier tsc=nowatchdog\n",
+ __func__);
+ else
+ tsc_as_watchdog = 1;
+ }
return 1;
}
@@ -1192,7 +1205,8 @@ static void __init tsc_disable_clocksource_watchdog(void)
bool tsc_clocksource_watchdog_disabled(void)
{
- return !(clocksource_tsc.flags & CLOCK_SOURCE_MUST_VERIFY);
+ return !(clocksource_tsc.flags & CLOCK_SOURCE_MUST_VERIFY) &&
+ tsc_as_watchdog && !no_tsc_watchdog;
}
static void __init check_system_tsc_reliable(void)
next prev parent reply other threads:[~2023-02-03 4:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-25 0:27 [PATCH clocksource v2 0/7] Clocksource watchdog updates for v6.3 Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 1/7] clocksource: Print clocksource name when clocksource is tested unstable Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 2/7] clocksource: Loosen clocksource watchdog constraints Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 3/7] clocksource: Improve read-back-delay message Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 4/7] clocksource: Improve "skew is too large" messages Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 5/7] clocksource: Suspend the watchdog temporarily when high read latency detected Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 6/7] clocksource: Verify HPET and PMTMR when TSC unverified Paul E. McKenney
2023-01-26 10:57 ` Daniel Lezcano
2023-02-01 0:50 ` Paul E. McKenney
2023-02-01 10:24 ` Thomas Gleixner
2023-02-01 15:10 ` Feng Tang
2023-02-01 19:26 ` Waiman Long
2023-02-01 19:55 ` Paul E. McKenney
2023-02-02 3:40 ` Waiman Long
2023-02-02 4:54 ` Paul E. McKenney
2023-02-02 7:57 ` Thomas Gleixner
2023-02-04 1:27 ` Paul E. McKenney
2023-02-01 19:51 ` Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 7/7] x86/tsc: Add option to force frequency recalibration with HW timer Paul E. McKenney
2023-02-03 4:36 ` Paul E. McKenney [this message]
2023-02-06 19:57 ` PATCH v2 clocksource 8/7] clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested Waiman Long
2023-02-07 1:08 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203043658.GA1513624@paulmck-ThinkPad-P17-Gen-1 \
--to=paulmck@kernel.org \
--cc=Mark.Rutland@arm.com \
--cc=ak@linux.intel.com \
--cc=corbet@lwn.net \
--cc=feng.tang@intel.com \
--cc=john.stultz@linaro.org \
--cc=kernel-team@meta.com \
--cc=linux-kernel@vger.kernel.org \
--cc=longman@redhat.com \
--cc=maz@kernel.org \
--cc=neeraju@codeaurora.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
--cc=zhengjun.xing@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®