From: "Paul E. McKenney" <paulmck@kernel.org>
To: Waiman Long <longman@redhat.com>
Cc: tglx@linutronix.de, linux-kernel@vger.kernel.org,
john.stultz@linaro.org, sboyd@kernel.org, corbet@lwn.net,
Mark.Rutland@arm.com, maz@kernel.org, kernel-team@meta.com,
neeraju@codeaurora.org, ak@linux.intel.com, feng.tang@intel.com,
zhengjun.xing@intel.com
Subject: Re: PATCH v2 clocksource 8/7] clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested
Date: Mon, 6 Feb 2023 17:08:32 -0800 [thread overview]
Message-ID: <20230207010832.GU2948950@paulmck-ThinkPad-P17-Gen-1> (raw)
In-Reply-To: <82e4dae9-0aca-a06b-cb0d-5a189998cdc1@redhat.com>
On Mon, Feb 06, 2023 at 02:57:55PM -0500, Waiman Long wrote:
> On 2/2/23 23:36, Paul E. McKenney wrote:
> > Unconditionally enabling TSC watchdog checking of the HPET and PMTMR
> > clocksources can degrade latency and performance. Therefore, provide
> > a new "watchdog" option to the tsc= boot parameter that opts into such
> > checking. Note that tsc=watchdog is overridden by a tsc=nowatchdog
> > regardless of their relative positions in the list of boot parameters.
> >
> > Reported-by: Thomas Gleixner <tglx@linutronix.de>
> > Reported-by: Waiman Long <longman@redhat.com>
> > Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
> >
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > index 95f0d104c2322..7b4df6d89d3c3 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -6373,6 +6373,12 @@
> > (HPET or PM timer) on systems whose TSC frequency was
> > obtained from HW or FW using either an MSR or CPUID(0x15).
> > Warn if the difference is more than 500 ppm.
> > + [x86] watchdog: Use TSC as the watchdog clocksource with
> > + which to check other HW timers (HPET or PM timer), but
> > + only on systems where TSC has been deemed trustworthy.
> > + This will be suppressed by an earlier tsc=nowatchdog and
> > + can be overridden by a later tsc=nowatchdog. A console
> > + message will flag any such suppression or overriding.
> > tsc_early_khz= [X86] Skip early TSC calibration and use the given
> > value instead. Useful when the early TSC frequency discovery
> > diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
> > index a5371c6d4b64b..306c233c98d84 100644
> > --- a/arch/x86/kernel/tsc.c
> > +++ b/arch/x86/kernel/tsc.c
> > @@ -294,6 +294,7 @@ __setup("notsc", notsc_setup);
> > static int no_sched_irq_time;
> > static int no_tsc_watchdog;
> > +static int tsc_as_watchdog;
> > static int __init tsc_setup(char *str)
> > {
> > @@ -303,10 +304,22 @@ static int __init tsc_setup(char *str)
> > no_sched_irq_time = 1;
> > if (!strcmp(str, "unstable"))
> > mark_tsc_unstable("boot parameter");
> > - if (!strcmp(str, "nowatchdog"))
> > + if (!strcmp(str, "nowatchdog")) {
> > no_tsc_watchdog = 1;
> > + if (tsc_as_watchdog)
> > + pr_alert("%s: Overriding earlier tsc=watchdog with tsc=nowatchdog\n",
> > + __func__);
> > + tsc_as_watchdog = 0;
> > + }
> > if (!strcmp(str, "recalibrate"))
> > tsc_force_recalibrate = 1;
> > + if (!strcmp(str, "watchdog")) {
> > + if (no_tsc_watchdog)
> > + pr_alert("%s: tsc=watchdog overridden by earlier tsc=nowatchdog\n",
> > + __func__);
> > + else
> > + tsc_as_watchdog = 1;
> > + }
> > return 1;
> > }
> > @@ -1192,7 +1205,8 @@ static void __init tsc_disable_clocksource_watchdog(void)
> > bool tsc_clocksource_watchdog_disabled(void)
> > {
> > - return !(clocksource_tsc.flags & CLOCK_SOURCE_MUST_VERIFY);
> > + return !(clocksource_tsc.flags & CLOCK_SOURCE_MUST_VERIFY) &&
> > + tsc_as_watchdog && !no_tsc_watchdog;
> > }
> > static void __init check_system_tsc_reliable(void)
> >
> Acked-by: Waiman Long <longman@redhat.com>
Applied, thank you!
Thanx, Paul
prev parent reply other threads:[~2023-02-07 1:08 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-25 0:27 [PATCH clocksource v2 0/7] Clocksource watchdog updates for v6.3 Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 1/7] clocksource: Print clocksource name when clocksource is tested unstable Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 2/7] clocksource: Loosen clocksource watchdog constraints Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 3/7] clocksource: Improve read-back-delay message Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 4/7] clocksource: Improve "skew is too large" messages Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 5/7] clocksource: Suspend the watchdog temporarily when high read latency detected Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 6/7] clocksource: Verify HPET and PMTMR when TSC unverified Paul E. McKenney
2023-01-26 10:57 ` Daniel Lezcano
2023-02-01 0:50 ` Paul E. McKenney
2023-02-01 10:24 ` Thomas Gleixner
2023-02-01 15:10 ` Feng Tang
2023-02-01 19:26 ` Waiman Long
2023-02-01 19:55 ` Paul E. McKenney
2023-02-02 3:40 ` Waiman Long
2023-02-02 4:54 ` Paul E. McKenney
2023-02-02 7:57 ` Thomas Gleixner
2023-02-04 1:27 ` Paul E. McKenney
2023-02-01 19:51 ` Paul E. McKenney
2023-01-25 0:27 ` [PATCH v2 clocksource 7/7] x86/tsc: Add option to force frequency recalibration with HW timer Paul E. McKenney
2023-02-03 4:36 ` PATCH v2 clocksource 8/7] clocksource: Enable TSC watchdog checking of HPET and PMTMR only when requested Paul E. McKenney
2023-02-06 19:57 ` Waiman Long
2023-02-07 1:08 ` Paul E. McKenney [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230207010832.GU2948950@paulmck-ThinkPad-P17-Gen-1 \
--to=paulmck@kernel.org \
--cc=Mark.Rutland@arm.com \
--cc=ak@linux.intel.com \
--cc=corbet@lwn.net \
--cc=feng.tang@intel.com \
--cc=john.stultz@linaro.org \
--cc=kernel-team@meta.com \
--cc=linux-kernel@vger.kernel.org \
--cc=longman@redhat.com \
--cc=maz@kernel.org \
--cc=neeraju@codeaurora.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
--cc=zhengjun.xing@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®