* [PATCH] ARM: dts: aspeed: mtjade, mtmitchell: Add OCP device temperature sensor
@ 2023-02-18 17:10 Chanh Nguyen
2023-03-27 4:12 ` Chanh Nguyen
0 siblings, 1 reply; 2+ messages in thread
From: Chanh Nguyen @ 2023-02-18 17:10 UTC (permalink / raw)
To: OpenBMC Maillist, Rob Herring, Krzysztof Kozlowski, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel
Cc: Chanh Nguyen
Define an I2C alias port from I2C Switch 0x70 at I2C5.
Add the OCP device temperature sensor via I2C alias port
as a tmp421 sensor.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
---
.../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 16 ++++++++++
.../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 29 +++++++++++++++++++
2 files changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 0a51d2e32fab..b93339ed61c0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -49,6 +49,11 @@
*/
i2c80 = &nvme_m2_0;
i2c81 = &nvme_m2_1;
+
+ /*
+ * i2c bus 82 assigned to OCP slot
+ */
+ i2c82 = &ocpslot;
};
chosen {
@@ -420,6 +425,17 @@
reg = <0x70>;
i2c-mux-idle-disconnect;
+ ocpslot: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ocp_temp: temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+
nvmeslot_0_7: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
index 4b91600eaf62..c832b8ae5999 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -10,6 +10,14 @@
model = "Ampere Mt.Mitchell BMC";
compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+ aliases {
+ /*
+ * i2c bus 30-31 assigned to OCP slot 0-1
+ */
+ i2c30 = &ocpslot_0;
+ i2c31 = &ocpslot_1;
+ };
+
chosen {
stdout-path = &uart5;
};
@@ -424,6 +432,27 @@
#size-cells = <0>;
reg = <0x70>;
i2c-mux-idle-disconnect;
+
+ ocpslot_0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ocpslot_0_temp: temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
+ ocpslot_1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+
+ ocpslot_1_temp: temperature-sensor@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ };
};
};
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [PATCH] ARM: dts: aspeed: mtjade, mtmitchell: Add OCP device temperature sensor
2023-02-18 17:10 [PATCH] ARM: dts: aspeed: mtjade, mtmitchell: Add OCP device temperature sensor Chanh Nguyen
@ 2023-03-27 4:12 ` Chanh Nguyen
0 siblings, 0 replies; 2+ messages in thread
From: Chanh Nguyen @ 2023-03-27 4:12 UTC (permalink / raw)
To: Chanh Nguyen, OpenBMC Maillist, Rob Herring, Krzysztof Kozlowski,
Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel,
linux-aspeed, linux-kernel
Dear reviewers,
Just a gentle ping for the patch.
Thanks,
- Chanh
On 19/02/2023 00:10, Chanh Nguyen wrote:
> Define an I2C alias port from I2C Switch 0x70 at I2C5.
> Add the OCP device temperature sensor via I2C alias port
> as a tmp421 sensor.
>
> Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
> ---
> .../arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 16 ++++++++++
> .../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 29 +++++++++++++++++++
> 2 files changed, 45 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> index 0a51d2e32fab..b93339ed61c0 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
> @@ -49,6 +49,11 @@
> */
> i2c80 = &nvme_m2_0;
> i2c81 = &nvme_m2_1;
> +
> + /*
> + * i2c bus 82 assigned to OCP slot
> + */
> + i2c82 = &ocpslot;
> };
>
> chosen {
> @@ -420,6 +425,17 @@
> reg = <0x70>;
> i2c-mux-idle-disconnect;
>
> + ocpslot: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> +
> + ocp_temp: temperature-sensor@1f {
> + compatible = "ti,tmp421";
> + reg = <0x1f>;
> + };
> + };
> +
> nvmeslot_0_7: i2c@3 {
> #address-cells = <1>;
> #size-cells = <0>;
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> index 4b91600eaf62..c832b8ae5999 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -10,6 +10,14 @@
> model = "Ampere Mt.Mitchell BMC";
> compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
>
> + aliases {
> + /*
> + * i2c bus 30-31 assigned to OCP slot 0-1
> + */
> + i2c30 = &ocpslot_0;
> + i2c31 = &ocpslot_1;
> + };
> +
> chosen {
> stdout-path = &uart5;
> };
> @@ -424,6 +432,27 @@
> #size-cells = <0>;
> reg = <0x70>;
> i2c-mux-idle-disconnect;
> +
> + ocpslot_0: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> +
> + ocpslot_0_temp: temperature-sensor@1f {
> + compatible = "ti,tmp421";
> + reg = <0x1f>;
> + };
> + };
> + ocpslot_1: i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x1>;
> +
> + ocpslot_1_temp: temperature-sensor@1f {
> + compatible = "ti,tmp421";
> + reg = <0x1f>;
> + };
> + };
> };
> };
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-03-27 4:13 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-18 17:10 [PATCH] ARM: dts: aspeed: mtjade, mtmitchell: Add OCP device temperature sensor Chanh Nguyen
2023-03-27 4:12 ` Chanh Nguyen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®