From: Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
To: patrick@stwcx.xyz, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>
Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH v1 1/2] ARM: dts: aspeed: greatlakes: Add gpio names
Date: Wed, 29 Mar 2023 16:32:34 +0800 [thread overview]
Message-ID: <20230329083235.24123-2-Delphine_CC_Chiu@Wiwynn.com> (raw)
In-Reply-To: <20230329083235.24123-1-Delphine_CC_Chiu@Wiwynn.com>
From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Add GPIO names for SOC lines.
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
---
.../dts/aspeed-bmc-facebook-greatlakes.dts | 49 +++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
index 8c05bd56ce1e..59819115c39d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -238,4 +238,53 @@
&gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+ status = "okay";
+ gpio-line-names =
+ /*A0-A7*/ "","","","","","","","",
+ /*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+ "power-bmc-slot1","power-bmc-slot2",
+ "power-bmc-slot3","power-bmc-slot4","","",
+ /*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+ "reset-cause-nic-secondary","","","",
+ /*D0-D7*/ "","","","","","","","",
+ /*E0-E7*/ "","","","","","","","",
+ /*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+ "slot3-bmc-reset-button","slot4-bmc-reset-button",
+ "","","","presence-emmc",
+ /*G0-G7*/ "","","","","","","","",
+ /*H0-H7*/ "","","","",
+ "presence-mb-slot1","presence-mb-slot2",
+ "presence-mb-slot3","presence-mb-slot4",
+ /*I0-I7*/ "","","","","","","bb-bmc-button","",
+ /*J0-J7*/ "","","","","","","","",
+ /*K0-K7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","","","","","",
+ /*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+ /*N0-N7*/ "","","","","bmc-ready","","","",
+ /*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+ /*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+ "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+ "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+ /*Q0-Q7*/ "","","","","","","","",
+ /*R0-R7*/ "","","","","","","","",
+ /*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+ /*T0-T7*/ "","","","","","","","",
+ /*U0-U7*/ "","","","","","","","GND",
+ /*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+ "bmc-slot3-ac-button","bmc-slot4-ac-button",
+ "","","","",
+ /*W0-W7*/ "","","","","","","","",
+ /*X0-X7*/ "","","","","","","","",
+ /*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+ /*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+ status = "okay";
+ gpio-line-names =
+ /*18A0-18A7*/ "","","","","","","","",
+ /*18B0-18B7*/ "","","","","","","","",
+ /*18C0-18C7*/ "","","","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","","","","","";
};
--
2.17.1
next prev parent reply other threads:[~2023-03-29 8:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-29 8:32 [PATCH v1 0/2] dts: aspeed: greatlakes: Update Greatlakes devicetree Delphine CC Chiu
2023-03-29 8:32 ` Delphine CC Chiu [this message]
2023-03-29 8:36 ` [PATCH v1 1/2] ARM: dts: aspeed: greatlakes: Add gpio names Krzysztof Kozlowski
2023-04-10 7:11 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2023-04-10 15:21 ` Krzysztof Kozlowski
2023-04-24 9:50 ` Delphine_CC_Chiu/WYHQ/Wiwynn
2023-03-29 8:32 ` [PATCH v1 2/2] ARM: dts: aspeed: greatlakes: add mctp device Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230329083235.24123-2-Delphine_CC_Chiu@Wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patrick@stwcx.xyz \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®