* [PATCH] scsi: message: fusion: remove unused timeleft variable
@ 2023-03-31 16:26 Tom Rix
2023-03-31 19:40 ` Bill Wendling
0 siblings, 1 reply; 3+ messages in thread
From: Tom Rix @ 2023-03-31 16:26 UTC (permalink / raw)
To: sathya.prakash, sreekanth.reddy, suganath-prabu.subramani,
nathan, ndesaulniers
Cc: MPT-FusionLinux.pdl, linux-scsi, linux-kernel, llvm, Tom Rix
clang with W=1 reports
drivers/message/fusion/mptsas.c:4796:17: error: variable
'timeleft' set but not used [-Werror,-Wunused-but-set-variable]
unsigned long timeleft;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
---
drivers/message/fusion/mptsas.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 86f16f3ea478..d458665e2fc9 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -4793,7 +4793,6 @@ mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
MPT_FRAME_HDR *mf;
SCSITaskMgmt_t *pScsiTm;
int retval;
- unsigned long timeleft;
*issue_reset = 0;
mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
@@ -4829,8 +4828,6 @@ mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
/* Now wait for the command to complete */
- timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
- timeout*HZ);
if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
retval = -1; /* return failure */
dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
--
2.27.0
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] scsi: message: fusion: remove unused timeleft variable
2023-03-31 16:26 [PATCH] scsi: message: fusion: remove unused timeleft variable Tom Rix
@ 2023-03-31 19:40 ` Bill Wendling
2023-03-31 21:03 ` Tom Rix
0 siblings, 1 reply; 3+ messages in thread
From: Bill Wendling @ 2023-03-31 19:40 UTC (permalink / raw)
To: Tom Rix
Cc: sathya.prakash, sreekanth.reddy, suganath-prabu.subramani,
nathan, ndesaulniers, MPT-FusionLinux.pdl, linux-scsi,
linux-kernel, llvm
On Fri, Mar 31, 2023 at 9:26 AM Tom Rix <trix@redhat.com> wrote:
>
> clang with W=1 reports
> drivers/message/fusion/mptsas.c:4796:17: error: variable
> 'timeleft' set but not used [-Werror,-Wunused-but-set-variable]
> unsigned long timeleft;
> ^
> This variable is not used so remove it.
>
> Signed-off-by: Tom Rix <trix@redhat.com>
> ---
> drivers/message/fusion/mptsas.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
> index 86f16f3ea478..d458665e2fc9 100644
> --- a/drivers/message/fusion/mptsas.c
> +++ b/drivers/message/fusion/mptsas.c
> @@ -4793,7 +4793,6 @@ mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
> MPT_FRAME_HDR *mf;
> SCSITaskMgmt_t *pScsiTm;
> int retval;
> - unsigned long timeleft;
>
> *issue_reset = 0;
> mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
> @@ -4829,8 +4828,6 @@ mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
> mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
>
> /* Now wait for the command to complete */
> - timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
> - timeout*HZ);
It looks bad to remove the call to wait_for_completion_timeout(). Is
it truly not needed? If it's needed, the "timeleft" should be checked
or a comment left to explain why it's not checked.
-bw
> if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
> retval = -1; /* return failure */
> dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
> --
> 2.27.0
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH] scsi: message: fusion: remove unused timeleft variable
2023-03-31 19:40 ` Bill Wendling
@ 2023-03-31 21:03 ` Tom Rix
0 siblings, 0 replies; 3+ messages in thread
From: Tom Rix @ 2023-03-31 21:03 UTC (permalink / raw)
To: Bill Wendling
Cc: sathya.prakash, sreekanth.reddy, suganath-prabu.subramani,
nathan, ndesaulniers, MPT-FusionLinux.pdl, linux-scsi,
linux-kernel, llvm
On 3/31/23 12:40 PM, Bill Wendling wrote:
> On Fri, Mar 31, 2023 at 9:26 AM Tom Rix <trix@redhat.com> wrote:
>> clang with W=1 reports
>> drivers/message/fusion/mptsas.c:4796:17: error: variable
>> 'timeleft' set but not used [-Werror,-Wunused-but-set-variable]
>> unsigned long timeleft;
>> ^
>> This variable is not used so remove it.
>>
>> Signed-off-by: Tom Rix <trix@redhat.com>
>> ---
>> drivers/message/fusion/mptsas.c | 3 ---
>> 1 file changed, 3 deletions(-)
>>
>> diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
>> index 86f16f3ea478..d458665e2fc9 100644
>> --- a/drivers/message/fusion/mptsas.c
>> +++ b/drivers/message/fusion/mptsas.c
>> @@ -4793,7 +4793,6 @@ mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
>> MPT_FRAME_HDR *mf;
>> SCSITaskMgmt_t *pScsiTm;
>> int retval;
>> - unsigned long timeleft;
>>
>> *issue_reset = 0;
>> mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
>> @@ -4829,8 +4828,6 @@ mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
>> mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
>>
>> /* Now wait for the command to complete */
>> - timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
>> - timeout*HZ);
> It looks bad to remove the call to wait_for_completion_timeout(). Is
> it truly not needed? If it's needed, the "timeleft" should be checked
> or a comment left to explain why it's not checked.
Yeah. this is a screw up on my part, sorry.
T
>
> -bw
>
>> if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
>> retval = -1; /* return failure */
>> dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
>> --
>> 2.27.0
>>
>>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-03-31 21:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-31 16:26 [PATCH] scsi: message: fusion: remove unused timeleft variable Tom Rix
2023-03-31 19:40 ` Bill Wendling
2023-03-31 21:03 ` Tom Rix
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®