* Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
2023-04-03 7:19 ` [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
@ 2023-04-03 9:51 ` Krzysztof Kozlowski
2023-04-05 9:27 ` Julien Stephan
2023-04-03 10:15 ` Chun-Kuang Hu
` (4 subsequent siblings)
5 siblings, 1 reply; 14+ messages in thread
From: Krzysztof Kozlowski @ 2023-04-03 9:51 UTC (permalink / raw)
To: Julien Stephan
Cc: Phi-bang Nguyen, Louis Kuo, Chunfeng Yun, Andy Hsieh, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Chun-Kuang Hu, Philipp Zabel, Matthias Brugger,
AngeloGioacchino Del Regno,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
open list:GENERIC PHY FRAMEWORK,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, open list:DRM DRIVERS FOR MEDIATEK
On 03/04/2023 09:19, Julien Stephan wrote:
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435 ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
>
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> index c026e43f35fd..ad4ba1d93a68 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
NAK, bindings are always separate patches. It also does not make any
sense - you just added it.
> @@ -33,9 +33,14 @@ additionalProperties: false
>
> examples:
> - |
> - phy@10011800 {
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + phy@11c10000 {
> compatible = "mediatek,mt8365-mipi-csi";
> - reg = <0 0x10011800 0 0x60>;
> + reg = <0 0x11c10000 0 0x4000>;
> #phy-cells = <1>;
> + };
> };
k_mipi_dphy_of_match[] = {
> + {.compatible = "mediatek,mt8365-mipi-csi"},
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_mipi_dphy_of_match);
> +
> +static struct platform_driver mipi_dphy_pdrv = {
> + .probe = mtk_mipi_dphy_probe,
> + .remove = mtk_mipi_dphy_remove,
> + .driver = {
> + .name = "mtk-mipi-csi",
> + .of_match_table = of_match_ptr(mtk_mipi_dphy_of_match),
Drop of_match_ptr(). You should see W=1 warnings when compile testing.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
2023-04-03 9:51 ` Krzysztof Kozlowski
@ 2023-04-05 9:27 ` Julien Stephan
0 siblings, 0 replies; 14+ messages in thread
From: Julien Stephan @ 2023-04-05 9:27 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Phi-bang Nguyen, Louis Kuo, Chunfeng Yun, Andy Hsieh, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Chun-Kuang Hu, Philipp Zabel, Matthias Brugger,
AngeloGioacchino Del Regno,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
open list:GENERIC PHY FRAMEWORK,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, open list:DRM DRIVERS FOR MEDIATEK
On Mon, Apr 03, 2023 at 11:51:50AM +0200, Krzysztof Kozlowski wrote:
> On 03/04/2023 09:19, Julien Stephan wrote:
> > From: Phi-bang Nguyen <pnguyen@baylibre.com>
> >
> > This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> > mt8365 soc
> >
> > Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> > Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> > [Julien Stephan: use regmap]
> > [Julien Stephan: use GENMASK]
> > Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> > Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> > ---
> > .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> > MAINTAINERS | 1 +
> > drivers/phy/mediatek/Kconfig | 8 +
> > drivers/phy/mediatek/Makefile | 2 +
> > .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435 ++++++++++++++++++
> > drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> > 6 files changed, 845 insertions(+), 2 deletions(-)
> > create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> > create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
> >
> > diff --git a/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> > index c026e43f35fd..ad4ba1d93a68 100644
> > --- a/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
>
> NAK, bindings are always separate patches. It also does not make any
> sense - you just added it.
>
:( I messed up my rebase -i. This need to be moved and squashed with the
previous patch. I will fix it in v2. Thank you for reporting it
> > @@ -33,9 +33,14 @@ additionalProperties: false
> >
> > examples:
> > - |
> > - phy@10011800 {
> > + soc {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + phy@11c10000 {
> > compatible = "mediatek,mt8365-mipi-csi";
> > - reg = <0 0x10011800 0 0x60>;
> > + reg = <0 0x11c10000 0 0x4000>;
> > #phy-cells = <1>;
> > + };
> > };
>
>
>
> k_mipi_dphy_of_match[] = {
> > + {.compatible = "mediatek,mt8365-mipi-csi"},
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, mtk_mipi_dphy_of_match);
> > +
> > +static struct platform_driver mipi_dphy_pdrv = {
> > + .probe = mtk_mipi_dphy_probe,
> > + .remove = mtk_mipi_dphy_remove,
> > + .driver = {
> > + .name = "mtk-mipi-csi",
> > + .of_match_table = of_match_ptr(mtk_mipi_dphy_of_match),
>
> Drop of_match_ptr(). You should see W=1 warnings when compile testing.
>
I do not not see any warnings when trying to compile with W=1. Am I
missing something? I will drop it in v2 anyway
Best
Julien
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
2023-04-03 7:19 ` [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
2023-04-03 9:51 ` Krzysztof Kozlowski
@ 2023-04-03 10:15 ` Chun-Kuang Hu
2023-04-03 15:21 ` Chun-Kuang Hu
` (3 subsequent siblings)
5 siblings, 0 replies; 14+ messages in thread
From: Chun-Kuang Hu @ 2023-04-03 10:15 UTC (permalink / raw)
To: Julien Stephan
Cc: Phi-bang Nguyen, Louis Kuo, Chunfeng Yun, Andy Hsieh, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Chun-Kuang Hu, Philipp Zabel, Matthias Brugger,
AngeloGioacchino Del Regno,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
open list:GENERIC PHY FRAMEWORK,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, open list:DRM DRIVERS FOR MEDIATEK
Hi, Julien:
Julien Stephan <jstephan@baylibre.com> 於 2023年4月3日 週一 下午3:20寫道：
>
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435 ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
>
[snip]
> +static int mtk_mipi_phy_power_on(struct phy *phy)
> +{
> + struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
> + struct mtk_mipi_dphy *priv = port->dev;
> + struct regmap *regmap_base = port->regmap_base;
> + struct regmap *regmap_4d1c = port->regmap_4d1c;
> + int ret = 0;
> +
> + mutex_lock(&priv->lock);
> +
> + switch (port->id) {
> + case MTK_MIPI_PHY_PORT_0:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0A].active ||
> + priv->ports[MTK_MIPI_PHY_PORT_0B].active)
> + ret = -EBUSY;
> + break;
> +
> + case MTK_MIPI_PHY_PORT_0A:
> + case MTK_MIPI_PHY_PORT_0B:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0].active)
> + ret = -EBUSY;
> + break;
> + }
> +
> + if (!ret)
> + port->active = true;
> +
> + mutex_unlock(&priv->lock);
> +
> + if (ret < 0)
> + return ret;
> +
> + /* Set analog phy mode to DPHY */
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 0);
> + }
> +
> + if (port->is_4d1c) {
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + }
> +
> + /* Byte clock invert */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> + }
> +
> + /* Start ANA EQ tuning */
> + if (port->is_cdphy) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> + }
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
RG_CSI1A_L0_EQ_IS is identical to RG_CSI0A_L0_T0AB_EQ_IS, and ditto
for below register. I think the function of each bitwise register is
the same. Define only one copy of the these register, don't duplicate
the same thing.
Regards,
Chun-Kuang.
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> + }
> + }
> +
> + /* End ANA EQ tuning */
> + regmap_write(regmap_base, MIPI_RX_ANA40_CSIxA, 0x90);
> +
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + REGMAP_BIT(regmap_base, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + /* ANA power on */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + usleep_range(20, 40);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> +
> + return 0;
> +}
> +
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
2023-04-03 7:19 ` [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
2023-04-03 9:51 ` Krzysztof Kozlowski
2023-04-03 10:15 ` Chun-Kuang Hu
@ 2023-04-03 15:21 ` Chun-Kuang Hu
2023-04-03 16:36 ` Chun-Kuang Hu
` (2 subsequent siblings)
5 siblings, 0 replies; 14+ messages in thread
From: Chun-Kuang Hu @ 2023-04-03 15:21 UTC (permalink / raw)
To: Julien Stephan
Cc: Phi-bang Nguyen, Louis Kuo, Chunfeng Yun, Andy Hsieh, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Chun-Kuang Hu, Philipp Zabel, Matthias Brugger,
AngeloGioacchino Del Regno,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
open list:GENERIC PHY FRAMEWORK,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, open list:DRM DRIVERS FOR MEDIATEK
Hi, Julien:
Julien Stephan <jstephan@baylibre.com> 於 2023年4月3日 週一 下午3:20寫道：
>
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435 ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
>
[snip]
> +
> +#define MIPI_RX_ANA04_CSIxA 0x0004
Useless, so drop this.
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_LPRX_VTH_SEL_SHIFT 0
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_LPRX_VTH_SEL_MASK GENMASK(2, 0)
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_LPRX_VTL_SEL_SHIFT 4
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_LPRX_VTL_SEL_MASK GENMASK(6, 4)
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_HSDET_VTH_SEL_SHIFT 8
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_HSDET_VTH_SEL_MASK GENMASK(10, 8)
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_HSDET_VTL_SEL_SHIFT 12
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_HSDET_VTL_SEL_MASK GENMASK(14, 12)
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_VREF_SEL_SHIFT 16
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_VREF_SEL_MASK GENMASK(19, 16)
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_MON_VREF_SEL_SHIFT 24
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_BG_MON_VREF_SEL_MASK GENMASK(27, 24)
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_FORCE_HSRT_EN_SHIFT 28
> +#define MIPI_RX_ANA04_CSIxA_RG_CSIxA_FORCE_HSRT_EN_MASK BIT(28)
> +
> +#define MIPI_RX_ANA08_CSIxA 0x0008
Ditto.
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L0P_T0A_HSRT_CODE_SHIFT 0
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L0P_T0A_HSRT_CODE_MASK GENMASK(4, 0)
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L0N_T0B_HSRT_CODE_SHIFT 8
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L0N_T0B_HSRT_CODE_MASK GENMASK(12, 8)
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L1P_T0C_HSRT_CODE_SHIFT 16
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L1P_T0C_HSRT_CODE_MASK GENMASK(20, 16)
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L1N_T1A_HSRT_CODE_SHIFT 24
> +#define MIPI_RX_ANA08_CSIxA_RG_CSIxA_L1N_T1A_HSRT_CODE_MASK GENMASK(28, 24)
> +
> +#define MIPI_RX_ANA0C_CSIxA 0x000c
Ditto.
> +#define MIPI_RX_ANA0C_CSIxA_RG_CSIxA_L2P_T1B_HSRT_CODE_SHIFT 0
> +#define MIPI_RX_ANA0C_CSIxA_RG_CSIxA_L2P_T1B_HSRT_CODE_MASK GENMASK(4, 0)
> +#define MIPI_RX_ANA0C_CSIxA_RG_CSIxA_L2N_T1C_HSRT_CODE_SHIFT 8
> +#define MIPI_RX_ANA0C_CSIxA_RG_CSIxA_L2N_T1C_HSRT_CODE_MASK GENMASK(12, 8)
> +
> +#define MIPI_RX_ANA10_CSIxA 0x0010
Ditto.
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L0_DELAYCAL_EN_SHIFT 0
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L0_DELAYCAL_EN_MASK BIT(0)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L0_DELAYCAL_RSTB_SHIFT 1
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L0_DELAYCAL_RSTB_MASK BIT(1)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L0_VREF_SEL_SHIFT 2
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L0_VREF_SEL_MASK GENMASK(7, 2)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L1_DELAYCAL_EN_SHIFT 8
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L1_DELAYCAL_EN_MASK BIT(8)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L1_DELAYCAL_RSTB_SHIFT 9
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L1_DELAYCAL_RSTB_MASK BIT(9)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L1_VREF_SEL_SHIFT 10
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L1_VREF_SEL_MASK GENMASK(15, 10)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L2_DELAYCAL_EN_SHIFT 16
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L2_DELAYCAL_EN_MASK BIT(16)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L2_DELAYCAL_RSTB_SHIFT 17
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L2_DELAYCAL_RSTB_MASK BIT(17)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L2_VREF_SEL_SHIFT 18
> +#define MIPI_RX_ANA10_CSIxA_RG_CSIxA_DPHY_L2_VREF_SEL_MASK GENMASK(23, 18)
> +/* C-PHY fields are only available in CSIx. */
> +#define MIPI_RX_ANA10_CSIxA_RG_CSI0A_CPHY_T0_CDR_DELAYCAL_EN_SHIFT 24
> +#define MIPI_RX_ANA10_CSIxA_RG_CSI0A_CPHY_T0_CDR_DELAYCAL_EN_MASK BIT(24)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSI0A_CPHY_T0_CDR_DELAYCAL_RSTB_SHIFT 25
> +#define MIPI_RX_ANA10_CSIxA_RG_CSI0A_CPHY_T0_CDR_DELAYCAL_RSTB_MASK BIT(25)
> +#define MIPI_RX_ANA10_CSIxA_RG_CSI0A_CPHY_T0_VREF_SEL_SHIFT 26
> +#define MIPI_RX_ANA10_CSIxA_RG_CSI0A_CPHY_T0_VREF_SEL_MASK GENMASK(31, 26)
> +
> +#define MIPI_RX_ANA14_CSIxA 0x0014
Ditto.
Regards,
Chun-Kuang.
> +/* C-PHY fields are only available in CSIx. */
> +#define MIPI_RX_ANA14_CSIxA_RG_CSI0A_CPHY_T1_CDR_DELAYCAL_EN_SHIFT 0
> +#define MIPI_RX_ANA14_CSIxA_RG_CSI0A_CPHY_T1_CDR_DELAYCAL_EN_MASK BIT(0)
> +#define MIPI_RX_ANA14_CSIxA_RG_CSI0A_CPHY_T1_CDR_DELAYCAL_RSTB_SHIFT 1
> +#define MIPI_RX_ANA14_CSIxA_RG_CSI0A_CPHY_T1_CDR_DELAYCAL_RSTB_MASK BIT(1)
> +#define MIPI_RX_ANA14_CSIxA_RG_CSI0A_CPHY_T1_VREF_SEL_SHIFT 2
> +#define MIPI_RX_ANA14_CSIxA_RG_CSI0A_CPHY_T1_VREF_SEL_MASK GENMASK(7, 2)
> +
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
2023-04-03 7:19 ` [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
` (2 preceding siblings ...)
2023-04-03 15:21 ` Chun-Kuang Hu
@ 2023-04-03 16:36 ` Chun-Kuang Hu
2023-04-07 3:31 ` Chunfeng Yun (云春峰)
2023-04-07 5:30 ` Chunfeng Yun (云春峰)
5 siblings, 0 replies; 14+ messages in thread
From: Chun-Kuang Hu @ 2023-04-03 16:36 UTC (permalink / raw)
To: Julien Stephan
Cc: Phi-bang Nguyen, Louis Kuo, Chunfeng Yun, Andy Hsieh, Vinod Koul,
Kishon Vijay Abraham I, Rob Herring, Krzysztof Kozlowski,
Chun-Kuang Hu, Philipp Zabel, Matthias Brugger,
AngeloGioacchino Del Regno,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
moderated list:ARM/Mediatek USB3 PHY DRIVER,
open list:GENERIC PHY FRAMEWORK,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
open list, open list:DRM DRIVERS FOR MEDIATEK
Hi, Julien:
Julien Stephan <jstephan@baylibre.com> 於 2023年4月3日 週一 下午3:20寫道：
>
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435 ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
>
[snip]
> +
> +#define REGMAP_BIT(map, reg, field, val) \
> + regmap_update_bits((map), reg, reg##_##field##_MASK, \
> + (val) << reg##_##field##_SHIFT)
> +
Use FIELD_PREP() macro so you can drop the definition of SHIFT symbol.
Regards,
Chun-Kuang.
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
2023-04-03 7:19 ` [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
` (3 preceding siblings ...)
2023-04-03 16:36 ` Chun-Kuang Hu
@ 2023-04-07 3:31 ` Chunfeng Yun (云春峰)
2023-04-07 5:30 ` Chunfeng Yun (云春峰)
5 siblings, 0 replies; 14+ messages in thread
From: Chunfeng Yun (云春峰) @ 2023-04-07 3:31 UTC (permalink / raw)
To: jstephan
Cc: linux-mediatek, robh+dt, linux-kernel, kishon, chunkuang.hu,
devicetree, p.zabel, dri-devel,
Andy Hsieh (謝智皓),
Louis Kuo (郭德寧),
krzysztof.kozlowski+dt, vkoul, matthias.bgg, linux-phy,
linux-arm-kernel, angelogioacchino.delregno, pnguyen
On Mon, 2023-04-03 at 09:19 +0200, Julien Stephan wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>
>
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435
> ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
Please cc linux-mediatek@lists.infradead.org
>
> ...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9308b4bb88bf..b3077eddd0bf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13103,6 +13103,7 @@ M: Julien Stephan <jstephan@baylibre.com
> >
>
> M: Andy Hsieh <andy.hsieh@mediatek.com>
> S: Supported
> F: Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> +F: drivers/phy/mediatek/phy-mtk-mipi-csi*
>
> MEDIATEK MMC/SD/SDIO DRIVER
> M: Chaotian Jing <chaotian.jing@mediatek.com>
separate a new patch for MAINTAINERS change?
> diff --git a/drivers/phy/mediatek/Kconfig
> b/drivers/phy/mediatek/Kconfig
> index 3125ecb5d119..63fb0fa77573 100644
> --- a/drivers/phy/mediatek/Kconfig
> +++ b/drivers/phy/mediatek/Kconfig
> @@ -74,3 +74,11 @@ config PHY_MTK_DP
> select GENERIC_PHY
> help
> Support DisplayPort PHY for MediaTek SoCs.
> +
> +config PHY_MTK_MIPI_CSI
> + tristate "MediaTek CSI CD-PHY Driver"
> + depends on ARCH_MEDIATEK && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the MIPI CSI CD-PHY receiver.
> + The driver supports multiple CSI cdphy ports
> simultaneously.
> diff --git a/drivers/phy/mediatek/Makefile
> b/drivers/phy/mediatek/Makefile
> index fb1f8edaffa7..9a178c1c2628 100644
> --- a/drivers/phy/mediatek/Makefile
> +++ b/drivers/phy/mediatek/Makefile
> @@ -18,3 +18,5 @@ phy-mtk-mipi-dsi-drv-y :=
> phy-mtk-mipi-dsi.o
> phy-mtk-mipi-dsi-drv-y += phy-mtk-mipi-dsi-mt8173.o
> phy-mtk-mipi-dsi-drv-y += phy-mtk-mipi-dsi-mt8183.o
> obj-$(CONFIG_PHY_MTK_MIPI_DSI) += phy-mtk-mipi-dsi-drv.o
> +
> +obj-$(CONFIG_PHY_MTK_MIPI_CSI) += phy-mtk-mipi-csi.o
> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> b/drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> new file mode 100644
> index 000000000000..f360e807e3d1
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> @@ -0,0 +1,435 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __MIPI_CDPHY_RX_REG_H__
> +#define __MIPI_CDPHY_RX_REG_H__
> +
> +/*
> + * CSI1 and CSI2 are identical, and similar to CSI0. All CSIx macros
> are
> + * applicable to the three PHYs. Where differences exist, they are
> denoted by
> + * macro names using CSI0 and CSI1, the latter being applicable to
> CSI1 and
> + * CSI2 alike.
> + */
> +
> +/*
> + * Due to lanes supporting C-PHY mode on CSI0, register fields that
> control the
> + * behaviour of lanes are named differently between CSI0 and
> CSI1/CSI2, even
> + * when they control parameters that are agnostic to the PHY mode.
> In those
> + * cases, the macros below use the CSI0 field names (e.g.
> + * MIPI_RX_ANA08_CSIxA_RG_CSIxA_L0P_T0A_HSRT_CODE_SHIFT).
> + */
> +
> <skip>
>
> +#define
> MIPI_RX_ANA24_CSIxA_RG_CSIxA_RESERVE_SHIFT
> 24
> +#define
> MIPI_RX_ANA24_CSIxA_RG_CSIxA_RESERVE_MASK
> (0xff << 24)
Use GENMASK()
> +
> +/* CSI0-specific register. */
> +#define
> MIPI_RX_ANA28_CSI0A
> 0x0028
> +#define
> MIPI_RX_ANA28_CSI0A_RG_CSI0A_CPHY_T0_CDR_DIRECT_EN_SHIFT
> 0
>
>
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSI1A_DPHY_L2_OS_CAL_CPLT_SHIFT
> 5
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSI1A_DPHY_L2_OS_CAL_CPLT_MASK
> BIT(5)
> +/* Common fields. */
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSIxA_OS_CAL_CODE_SHIFT
> 8
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSIxA_OS_CAL_CODE_MASK
> GENMASK(15, 8)
> +
> +#define
> MIPI_RX_WRAPPER80_CSIxA
> 0x0080
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_MON_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_MON_MASK
> BIT(0)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_EN_SHIFT
> 1
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_EN_MASK
> BIT(1)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_MON_MUX_SHIFT
> 8
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_MON_MUX_MASK
> GENMASK(15, 8)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_RST_MODE_SHIFT
> 16
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_RST_MODE_MASK
> GENMASK(17, 16)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_SW_RST_SHIFT
> 24
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_SW_RST_MASK
> GENMASK(27, 24)
> +
> +#define
> MIPI_RX_WRAPPER84_CSIxA
> 0x0084
> +#define
> MIPI_RX_WRAPPER84_CSIxA_CSI_DEBUG_OUT_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER84_CSIxA_CSI_DEBUG_OUT_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER88_CSIxA
> 0x0088
> +#define
> MIPI_RX_WRAPPER88_CSIxA_CSR_SW_MODE_0_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER88_CSIxA_CSR_SW_MODE_0_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER8C_CSIxA
> 0x008c
> +#define
> MIPI_RX_WRAPPER8C_CSIxA_CSR_SW_MODE_1_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER8C_CSIxA_CSR_SW_MODE_1_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER90_CSIxA
> 0x0090
> +#define
> MIPI_RX_WRAPPER90_CSIxA_CSR_SW_MODE_2_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER90_CSIxA_CSR_SW_MODE_2_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER94_CSIxA
> 0x0094
> +#define
> MIPI_RX_WRAPPER94_CSIxA_CSR_SW_VALUE_0_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER94_CSIxA_CSR_SW_VALUE_0_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER98_CSIxA
> 0x0098
> +#define
> MIPI_RX_WRAPPER98_CSIxA_CSR_SW_VALUE_1_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER98_CSIxA_CSR_SW_VALUE_1_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER9C_CSIxA
> 0x009c
> +#define
> MIPI_RX_WRAPPER9C_CSIxA_CSR_SW_VALUE_2_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER9C_CSIxA_CSR_SW_VALUE_2_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_ANAA4_CSIxA
> 0x00a4
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_SYNC_INIT_SEL_SHIFT
> 0
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_SYNC_INIT_SEL_MASK
> BIT(0)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_FORCE_INIT_SHIFT
> 1
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_FORCE_INIT_MASK
> BIT(1)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_SYNC_INIT_SEL_SHIFT
> 2
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_SYNC_INIT_SEL_MASK
> BIT(2)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_FORCE_INIT_SHIFT
> 3
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_FORCE_INIT_MASK
> BIT(3)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_SYNC_INIT_SEL_SHIFT
> 4
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_SYNC_INIT_SEL_MASK
> BIT(4)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_FORCE_INIT_SHIFT
> 5
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_FORCE_INIT_MASK
> BIT(5)
> +
> +#define
> MIPI_RX_ANAA8_CSIxA
> 0x00a8
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT_SHIFT
> 0
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT_MASK
> BIT(0)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_L1_BYTECK_INVERT_SHIFT
> 1
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_L1_BYTECK_INVERT_MASK
> BIT(1)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT_SHIFT
> 2
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT_MASK
> BIT(2)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_LEVEL_MODE_EN_SHIFT
> 3
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_LEVEL_MODE_EN_MASK
> BIT(3)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_SEL_SHIFT
> 4
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_SEL_MASK
> GENMASK(6, 4)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_DIG_BACK_EN_SHIFT
> 7
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_DIG_BACK_EN_MASK
> BIT(7)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_DELAYCAL_CK_SEL_SHIFT
> 8
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_DELAYCAL_CK_SEL_MASK
> GENMASK(10, 8)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_DIV_SHIFT
> 11
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_DIV_MASK
> GENMASK(12, 11)
> +
> +#endif
> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi.c
> b/drivers/phy/mediatek/phy-mtk-mipi-csi.c
> new file mode 100644
> index 000000000000..6ce3f95f57bd
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi.c
> @@ -0,0 +1,392 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/regmap.h>
> +
> +#include "phy-mtk-mipi-csi-rx-reg.h"
> +
> +#define CSIxB_OFFSET 0x1000
> +
> +struct mtk_mipi_dphy;
> +
> +enum mtk_mipi_dphy_port_id {
> + MTK_MIPI_PHY_PORT_0 = 0x0, /* 4D1C - CDPHY */
> + MTK_MIPI_PHY_PORT_1, /* 4D1C - DPHY */
> + MTK_MIPI_PHY_PORT_2, /* 4D1C - DPHY */
> + MTK_MIPI_PHY_PORT_0A, /* 2D1C - CDPHY */
> + MTK_MIPI_PHY_PORT_0B, /* 2D1C - CDPHY */
> + MTK_MIPI_PHY_PORT_MAX_NUM
> +};
> +
> +struct mtk_mipi_dphy_port {
> + struct mtk_mipi_dphy *dev;
> + enum mtk_mipi_dphy_port_id id;
> + struct regmap *regmap_base;
> + struct regmap *regmap_4d1c;
Could you avoid using regmap if the registers are only used by this
driver, use phy-mtk-io.h api instead.
> + struct phy *phy;
> + bool active;
> + bool is_cdphy;
> + bool is_4d1c;
> +};
> +
> +struct mtk_mipi_dphy {
> + struct device *dev;
> + void __iomem *rx;
> + struct mtk_mipi_dphy_port ports[MTK_MIPI_PHY_PORT_MAX_NUM];
> + struct mutex lock; /* Ports CSI0 and CSI0A/B are mutually
> exclusive */
phy core already provides a mutex, no need provide another one.
Do you switch them at runtime for port 0?
From binding, I guess we use mtk_mipi_dphy_port_id in DTS to determine
which mode is used.
> +};
> +
> +#define REGMAP_BIT(map, reg, field, val) \
> + regmap_update_bits((map), reg, reg##_##field##_MASK, \
> + (val) << reg##_##field##_SHIFT)
> +
> +static int mtk_mipi_phy_power_on(struct phy *phy)
> +{
> + struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
> + struct mtk_mipi_dphy *priv = port->dev;
> + struct regmap *regmap_base = port->regmap_base;
> + struct regmap *regmap_4d1c = port->regmap_4d1c;
> + int ret = 0;
> +
> + mutex_lock(&priv->lock);
> +
> + switch (port->id) {
> + case MTK_MIPI_PHY_PORT_0:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0A].active ||
> + priv->ports[MTK_MIPI_PHY_PORT_0B].active)
> + ret = -EBUSY;
> + break;
> +
> + case MTK_MIPI_PHY_PORT_0A:
> + case MTK_MIPI_PHY_PORT_0B:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0].active)
> + ret = -EBUSY;
> + break;
> + }
> +
> + if (!ret)
> + port->active = true;
> +
> + mutex_unlock(&priv->lock);
> +
> + if (ret < 0)
> + return ret;
> +
> + /* Set analog phy mode to DPHY */
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 0);
> + }
> +
> + if (port->is_4d1c) {
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + }
> +
> + /* Byte clock invert */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> + }
> +
> + /* Start ANA EQ tuning */
> + if (port->is_cdphy) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> + }
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> + }
> + }
> +
> + /* End ANA EQ tuning */
> + regmap_write(regmap_base, MIPI_RX_ANA40_CSIxA, 0x90);
> +
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + REGMAP_BIT(regmap_base, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + /* ANA power on */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + usleep_range(20, 40);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> +
> + return 0;
> +}
> +
> +static int mtk_mipi_phy_power_off(struct phy *phy)
> +{
> + struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
> + struct regmap *regmap_base = port->regmap_base;
> + struct regmap *regmap_4d1c = port->regmap_4d1c;
> +
> + /* Disable MIPI BG. */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 0);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 0);
> + }
> +
> + mutex_lock(&port->dev->lock);
> + port->active = false;
> + mutex_unlock(&port->dev->lock);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops mtk_dphy_ops = {
> + .power_on = mtk_mipi_phy_power_on,
> + .power_off = mtk_mipi_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct phy *mtk_mipi_dphy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct mtk_mipi_dphy *priv = dev_get_drvdata(dev);
> +
> + if (args->args_count != 1)
> + return ERR_PTR(-EINVAL);
> +
> + if (args->args[0] >= ARRAY_SIZE(priv->ports))
> + return ERR_PTR(-ENODEV);
> +
> + return priv->ports[args->args[0]].phy;
> +}
> +
> +static const struct regmap_config mt8365_phy_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = 0x700,
> +};
> +
> +static int mtk_mipi_dphy_probe(struct platform_device *pdev)
> +{
> + static const unsigned int ports_offsets[] = {
> + [MTK_MIPI_PHY_PORT_0] = 0,
> + [MTK_MIPI_PHY_PORT_0A] = 0,
> + [MTK_MIPI_PHY_PORT_0B] = 0x1000,
> + [MTK_MIPI_PHY_PORT_1] = 0x2000,
> + [MTK_MIPI_PHY_PORT_2] = 0x4000,
> + };
How about provide three subnode (p0/p1/p2)in dts like as tphy driver?
for the port 0, it works as three mode (*_0/0A/0B, or 4d1c/2d1c), we
can distinguish it from phy arguments, also the same for port 1/2
> +
> + struct device *dev = &pdev->dev;
> + struct phy_provider *phy_provider;
> + struct mtk_mipi_dphy *priv;
> + struct resource *res;
> + unsigned int i;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, priv);
> + priv->dev = dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->rx = devm_ioremap_resource(dev, res);
use devm_platform_ioremap_resource()
> + if (IS_ERR(priv->rx))
> + return PTR_ERR(priv->rx);
> +
> + for (i = 0; i < ARRAY_SIZE(priv->ports); ++i) {
> + struct mtk_mipi_dphy_port *port = &priv->ports[i];
> + struct phy *phy;
> + void __iomem *base;
> +
> + port->dev = priv;
> + port->id = i;
> + base = priv->rx + ports_offsets[i];
> +
> + port->regmap_base = devm_regmap_init_mmio(port->dev-
> > dev,
>
> + base,
> + &mt8365_phy
> _regmap_config);
> +
> + port->is_cdphy = i == MTK_MIPI_PHY_PORT_0A ||
> + i == MTK_MIPI_PHY_PORT_0B ||
> + i == MTK_MIPI_PHY_PORT_0;
> + port->is_4d1c = i < MTK_MIPI_PHY_PORT_0A;
> +
> + if (port->is_4d1c)
> + port->regmap_4d1c =
> devm_regmap_init_mmio(port->dev->dev,
> + bas
> e + CSIxB_OFFSET,
> + &mt
> 8365_phy_regmap_config);
> +
> + phy = devm_phy_create(dev, NULL, &mtk_dphy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "Failed to create PHY: %ld\n",
> PTR_ERR(phy));
> + return PTR_ERR(phy);
> + }
> +
> + port->phy = phy;
> + phy_set_drvdata(phy, port);
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev,
> mtk_mipi_dphy_xlate);
> + if (IS_ERR(phy_provider)) {
> + dev_err(dev, "Failed to register PHY provider:
> %ld\n",
> + PTR_ERR(phy_provider));
> + return PTR_ERR(phy_provider);
> + }
> +
> + mutex_init(&priv->lock);
> +
> + return 0;
> +}
> +
> +static int mtk_mipi_dphy_remove(struct platform_device *pdev)
> +{
> + struct mtk_mipi_dphy *priv = platform_get_drvdata(pdev);
> +
> + mutex_destroy(&priv->lock);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mtk_mipi_dphy_of_match[] = {
> + {.compatible = "mediatek,mt8365-mipi-csi"},
prefer to provide a generic compatible if not a specific controller
only for mt8365.
Thanks a lot
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_mipi_dphy_of_match);
> +
> +static struct platform_driver mipi_dphy_pdrv = {
> + .probe = mtk_mipi_dphy_probe,
> + .remove = mtk_mipi_dphy_remove,
> + .driver = {
> + .name = "mtk-mipi-csi",
> + .of_match_table =
> of_match_ptr(mtk_mipi_dphy_of_match),
> + },
> +};
> +
> +module_platform_driver(mipi_dphy_pdrv);
> +
> +MODULE_DESCRIPTION("MTK mipi csi cdphy driver");
> +MODULE_AUTHOR("Louis Kuo <louis.kuo@mediatek.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.40.0
>
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy
2023-04-03 7:19 ` [PATCH 2/2] phy: mtk-mipi-csi: add driver for CSI phy Julien Stephan
` (4 preceding siblings ...)
2023-04-07 3:31 ` Chunfeng Yun (云春峰)
@ 2023-04-07 5:30 ` Chunfeng Yun (云春峰)
5 siblings, 0 replies; 14+ messages in thread
From: Chunfeng Yun (云春峰) @ 2023-04-07 5:30 UTC (permalink / raw)
To: jstephan
Cc: linux-mediatek, robh+dt, linux-kernel, kishon, chunkuang.hu,
devicetree, p.zabel, dri-devel,
Andy Hsieh (謝智皓),
Louis Kuo (郭德寧),
krzysztof.kozlowski+dt, vkoul, matthias.bgg, linux-phy,
linux-arm-kernel, angelogioacchino.delregno, pnguyen
On Mon, 2023-04-03 at 09:19 +0200, Julien Stephan wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>
>
> From: Phi-bang Nguyen <pnguyen@baylibre.com>
>
> This is a new driver that supports the MIPI CSI CD-PHY for mediatek
> mt8365 soc
>
> Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
> [Julien Stephan: use regmap]
> [Julien Stephan: use GENMASK]
> Co-developed-by: Julien Stephan <jstephan@baylibre.com>
> Signed-off-by: Julien Stephan <jstephan@baylibre.com>
> ---
> .../bindings/phy/mediatek,csi-phy.yaml | 9 +-
> MAINTAINERS | 1 +
> drivers/phy/mediatek/Kconfig | 8 +
> drivers/phy/mediatek/Makefile | 2 +
> .../phy/mediatek/phy-mtk-mipi-csi-rx-reg.h | 435
> ++++++++++++++++++
> drivers/phy/mediatek/phy-mtk-mipi-csi.c | 392 ++++++++++++++++
> 6 files changed, 845 insertions(+), 2 deletions(-)
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi.c
Please cc linux-mediatek@lists.infradead.org
>
> ...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9308b4bb88bf..b3077eddd0bf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13103,6 +13103,7 @@ M: Julien Stephan <jstephan@baylibre.com
> >
> M: Andy Hsieh <andy.hsieh@mediatek.com>
> S: Supported
> F: Documentation/devicetree/bindings/phy/mediatek,csi-phy.yaml
> +F: drivers/phy/mediatek/phy-mtk-mipi-csi*
>
> MEDIATEK MMC/SD/SDIO DRIVER
> M: Chaotian Jing <chaotian.jing@mediatek.com>
separate a new patch for MAINTAINERS change?
> diff --git a/drivers/phy/mediatek/Kconfig
> b/drivers/phy/mediatek/Kconfig
> index 3125ecb5d119..63fb0fa77573 100644
> --- a/drivers/phy/mediatek/Kconfig
> +++ b/drivers/phy/mediatek/Kconfig
> @@ -74,3 +74,11 @@ config PHY_MTK_DP
> select GENERIC_PHY
> help
> Support DisplayPort PHY for MediaTek SoCs.
> +
> +config PHY_MTK_MIPI_CSI
> + tristate "MediaTek CSI CD-PHY Driver"
> + depends on ARCH_MEDIATEK && OF
> + select GENERIC_PHY
> + help
> + Enable this to support the MIPI CSI CD-PHY receiver.
> + The driver supports multiple CSI cdphy ports
> simultaneously.
> diff --git a/drivers/phy/mediatek/Makefile
> b/drivers/phy/mediatek/Makefile
> index fb1f8edaffa7..9a178c1c2628 100644
> --- a/drivers/phy/mediatek/Makefile
> +++ b/drivers/phy/mediatek/Makefile
> @@ -18,3 +18,5 @@ phy-mtk-mipi-dsi-drv-y :=
> phy-mtk-mipi-dsi.o
> phy-mtk-mipi-dsi-drv-y += phy-mtk-mipi-dsi-mt8173.o
> phy-mtk-mipi-dsi-drv-y += phy-mtk-mipi-dsi-mt8183.o
> obj-$(CONFIG_PHY_MTK_MIPI_DSI) += phy-mtk-mipi-dsi-drv.o
> +
> +obj-$(CONFIG_PHY_MTK_MIPI_CSI) += phy-mtk-mipi-csi.o
> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> b/drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> new file mode 100644
> index 000000000000..f360e807e3d1
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-rx-reg.h
> @@ -0,0 +1,435 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __MIPI_CDPHY_RX_REG_H__
> +#define __MIPI_CDPHY_RX_REG_H__
> +
> +/*
> + * CSI1 and CSI2 are identical, and similar to CSI0. All CSIx macros
> are
> + * applicable to the three PHYs. Where differences exist, they are
> denoted by
> + * macro names using CSI0 and CSI1, the latter being applicable to
> CSI1 and
> + * CSI2 alike.
> + */
> +
> +/*
> + * Due to lanes supporting C-PHY mode on CSI0, register fields that
> control the
> + * behaviour of lanes are named differently between CSI0 and
> CSI1/CSI2, even
> + * when they control parameters that are agnostic to the PHY mode.
> In those
> + * cases, the macros below use the CSI0 field names (e.g.
> + * MIPI_RX_ANA08_CSIxA_RG_CSIxA_L0P_T0A_HSRT_CODE_SHIFT).
> + */
> +
> <skip>
>
> +#define
> MIPI_RX_ANA24_CSIxA_RG_CSIxA_RESERVE_SHIFT
> 24
> +#define
> MIPI_RX_ANA24_CSIxA_RG_CSIxA_RESERVE_MASK
> (0xff << 24)
Use GENMASK()
> +
> +/* CSI0-specific register. */
> +#define
> MIPI_RX_ANA28_CSI0A
> 0x0028
> +#define
> MIPI_RX_ANA28_CSI0A_RG_CSI0A_CPHY_T0_CDR_DIRECT_EN_SHIFT
> 0
>
>
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSI1A_DPHY_L2_OS_CAL_CPLT_SHIFT
> 5
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSI1A_DPHY_L2_OS_CAL_CPLT_MASK
> BIT(5)
> +/* Common fields. */
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSIxA_OS_CAL_CODE_SHIFT
> 8
> +#define
> MIPI_RX_ANA48_CSIxA_RGS_CSIxA_OS_CAL_CODE_MASK
> GENMASK(15, 8)
> +
> +#define
> MIPI_RX_WRAPPER80_CSIxA
> 0x0080
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_MON_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_MON_MASK
> BIT(0)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_EN_SHIFT
> 1
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_CLK_EN_MASK
> BIT(1)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_MON_MUX_SHIFT
> 8
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_MON_MUX_MASK
> GENMASK(15, 8)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_RST_MODE_SHIFT
> 16
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_CSI_RST_MODE_MASK
> GENMASK(17, 16)
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_SW_RST_SHIFT
> 24
> +#define
> MIPI_RX_WRAPPER80_CSIxA_CSR_SW_RST_MASK
> GENMASK(27, 24)
> +
> +#define
> MIPI_RX_WRAPPER84_CSIxA
> 0x0084
> +#define
> MIPI_RX_WRAPPER84_CSIxA_CSI_DEBUG_OUT_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER84_CSIxA_CSI_DEBUG_OUT_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER88_CSIxA
> 0x0088
> +#define
> MIPI_RX_WRAPPER88_CSIxA_CSR_SW_MODE_0_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER88_CSIxA_CSR_SW_MODE_0_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER8C_CSIxA
> 0x008c
> +#define
> MIPI_RX_WRAPPER8C_CSIxA_CSR_SW_MODE_1_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER8C_CSIxA_CSR_SW_MODE_1_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER90_CSIxA
> 0x0090
> +#define
> MIPI_RX_WRAPPER90_CSIxA_CSR_SW_MODE_2_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER90_CSIxA_CSR_SW_MODE_2_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER94_CSIxA
> 0x0094
> +#define
> MIPI_RX_WRAPPER94_CSIxA_CSR_SW_VALUE_0_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER94_CSIxA_CSR_SW_VALUE_0_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER98_CSIxA
> 0x0098
> +#define
> MIPI_RX_WRAPPER98_CSIxA_CSR_SW_VALUE_1_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER98_CSIxA_CSR_SW_VALUE_1_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_WRAPPER9C_CSIxA
> 0x009c
> +#define
> MIPI_RX_WRAPPER9C_CSIxA_CSR_SW_VALUE_2_SHIFT
> 0
> +#define
> MIPI_RX_WRAPPER9C_CSIxA_CSR_SW_VALUE_2_MASK
> GENMASK(31, 0)
> +
> +#define
> MIPI_RX_ANAA4_CSIxA
> 0x00a4
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_SYNC_INIT_SEL_SHIFT
> 0
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_SYNC_INIT_SEL_MASK
> BIT(0)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_FORCE_INIT_SHIFT
> 1
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L0_T0_FORCE_INIT_MASK
> BIT(1)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_SYNC_INIT_SEL_SHIFT
> 2
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_SYNC_INIT_SEL_MASK
> BIT(2)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_FORCE_INIT_SHIFT
> 3
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_DPHY_L1_FORCE_INIT_MASK
> BIT(3)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_SYNC_INIT_SEL_SHIFT
> 4
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_SYNC_INIT_SEL_MASK
> BIT(4)
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_FORCE_INIT_SHIFT
> 5
> +#define
> MIPI_RX_ANAA4_CSIxA_RG_CSIxA_CDPHY_L2_T2_FORCE_INIT_MASK
> BIT(5)
> +
> +#define
> MIPI_RX_ANAA8_CSIxA
> 0x00a8
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT_SHIFT
> 0
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT_MASK
> BIT(0)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_L1_BYTECK_INVERT_SHIFT
> 1
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_L1_BYTECK_INVERT_MASK
> BIT(1)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT_SHIFT
> 2
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT_MASK
> BIT(2)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_LEVEL_MODE_EN_SHIFT
> 3
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_LEVEL_MODE_EN_MASK
> BIT(3)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_SEL_SHIFT
> 4
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_SEL_MASK
> GENMASK(6, 4)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_DIG_BACK_EN_SHIFT
> 7
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_DPHY_HSDET_DIG_BACK_EN_MASK
> BIT(7)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_DELAYCAL_CK_SEL_SHIFT
> 8
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_CDPHY_DELAYCAL_CK_SEL_MASK
> GENMASK(10, 8)
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_DIV_SHIFT
> 11
> +#define
> MIPI_RX_ANAA8_CSIxA_RG_CSIxA_OS_CAL_DIV_MASK
> GENMASK(12, 11)
> +
> +#endif
> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi.c
> b/drivers/phy/mediatek/phy-mtk-mipi-csi.c
> new file mode 100644
> index 000000000000..6ce3f95f57bd
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi.c
> @@ -0,0 +1,392 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/regmap.h>
> +
> +#include "phy-mtk-mipi-csi-rx-reg.h"
> +
> +#define CSIxB_OFFSET 0x1000
> +
> +struct mtk_mipi_dphy;
> +
> +enum mtk_mipi_dphy_port_id {
> + MTK_MIPI_PHY_PORT_0 = 0x0, /* 4D1C - CDPHY */
> + MTK_MIPI_PHY_PORT_1, /* 4D1C - DPHY */
> + MTK_MIPI_PHY_PORT_2, /* 4D1C - DPHY */
> + MTK_MIPI_PHY_PORT_0A, /* 2D1C - CDPHY */
> + MTK_MIPI_PHY_PORT_0B, /* 2D1C - CDPHY */
> + MTK_MIPI_PHY_PORT_MAX_NUM
> +};
> +
> +struct mtk_mipi_dphy_port {
> + struct mtk_mipi_dphy *dev;
> + enum mtk_mipi_dphy_port_id id;
> + struct regmap *regmap_base;
> + struct regmap *regmap_4d1c;
Could you avoid using regmap if the registers are only used by this
driver, use phy-mtk-io.h api instead.
> + struct phy *phy;
> + bool active;
> + bool is_cdphy;
> + bool is_4d1c;
> +};
> +
> +struct mtk_mipi_dphy {
> + struct device *dev;
> + void __iomem *rx;
> + struct mtk_mipi_dphy_port ports[MTK_MIPI_PHY_PORT_MAX_NUM];
> + struct mutex lock; /* Ports CSI0 and CSI0A/B are mutually
> exclusive */
phy core already provides a mutex, no need provide another one.
Do you switch them at runtime for port 0?
From binding, I guess we use mtk_mipi_dphy_port_id in DTS to determine
which mode is used.
> +};
> +
> +#define REGMAP_BIT(map, reg, field, val) \
> + regmap_update_bits((map), reg, reg##_##field##_MASK, \
> + (val) << reg##_##field##_SHIFT)
> +
> +static int mtk_mipi_phy_power_on(struct phy *phy)
> +{
> + struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
> + struct mtk_mipi_dphy *priv = port->dev;
> + struct regmap *regmap_base = port->regmap_base;
> + struct regmap *regmap_4d1c = port->regmap_4d1c;
> + int ret = 0;
> +
> + mutex_lock(&priv->lock);
> +
> + switch (port->id) {
> + case MTK_MIPI_PHY_PORT_0:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0A].active ||
> + priv->ports[MTK_MIPI_PHY_PORT_0B].active)
> + ret = -EBUSY;
> + break;
> +
> + case MTK_MIPI_PHY_PORT_0A:
> + case MTK_MIPI_PHY_PORT_0B:
> + if (priv->ports[MTK_MIPI_PHY_PORT_0].active)
> + ret = -EBUSY;
> + break;
> + }
> +
> + if (!ret)
> + port->active = true;
> +
> + mutex_unlock(&priv->lock);
> +
> + if (ret < 0)
> + return ret;
> +
> + /* Set analog phy mode to DPHY */
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 0);
> + }
> +
> + if (port->is_4d1c) {
> + if (port->is_cdphy)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSI0A_CPHY_EN, 0);
> +
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L0_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L1_CKSEL, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKMODE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_DPHY_L2_CKSEL, 1);
> + }
> +
> + /* Byte clock invert */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_DPHY_L1_BYTECK_INVERT, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANAA8_CSIxA,
> + RG_CSIxA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> + }
> +
> + /* Start ANA EQ tuning */
> + if (port->is_cdphy) {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI0A_L0_T0AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI0A_L1_T1AB_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA20_CSI0A,
> + RG_CSI0A_L2_T1BC_EQ_BW, 1);
> + }
> + } else {
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L0_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA18_CSIxA,
> + RG_CSI1A_L1_EQ_BW, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_IS, 1);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA1C_CSIxA,
> + RG_CSI1A_L2_EQ_BW, 1);
> + }
> + }
> +
> + /* End ANA EQ tuning */
> + regmap_write(regmap_base, MIPI_RX_ANA40_CSIxA, 0x90);
> +
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA24_CSIxA,
> + RG_CSIxA_RESERVE, 0x40);
> + REGMAP_BIT(regmap_base, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_WRAPPER80_CSIxA,
> + CSR_CSI_RST_MODE, 0);
> + /* ANA power on */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 1);
> + usleep_range(20, 40);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> + if (port->is_4d1c)
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 1);
> +
> + return 0;
> +}
> +
> +static int mtk_mipi_phy_power_off(struct phy *phy)
> +{
> + struct mtk_mipi_dphy_port *port = phy_get_drvdata(phy);
> + struct regmap *regmap_base = port->regmap_base;
> + struct regmap *regmap_4d1c = port->regmap_4d1c;
> +
> + /* Disable MIPI BG. */
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 0);
> + REGMAP_BIT(regmap_base, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 0);
> +
> + if (port->is_4d1c) {
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_CORE_EN, 0);
> + REGMAP_BIT(regmap_4d1c, MIPI_RX_ANA00_CSIxA,
> + RG_CSIxA_BG_LPF_EN, 0);
> + }
> +
> + mutex_lock(&port->dev->lock);
> + port->active = false;
> + mutex_unlock(&port->dev->lock);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops mtk_dphy_ops = {
> + .power_on = mtk_mipi_phy_power_on,
> + .power_off = mtk_mipi_phy_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct phy *mtk_mipi_dphy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct mtk_mipi_dphy *priv = dev_get_drvdata(dev);
> +
> + if (args->args_count != 1)
> + return ERR_PTR(-EINVAL);
> +
> + if (args->args[0] >= ARRAY_SIZE(priv->ports))
> + return ERR_PTR(-ENODEV);
> +
> + return priv->ports[args->args[0]].phy;
> +}
> +
> +static const struct regmap_config mt8365_phy_regmap_config = {
> + .reg_bits = 32,
> + .val_bits = 32,
> + .reg_stride = 4,
> + .max_register = 0x700,
> +};
> +
> +static int mtk_mipi_dphy_probe(struct platform_device *pdev)
> +{
> + static const unsigned int ports_offsets[] = {
> + [MTK_MIPI_PHY_PORT_0] = 0,
> + [MTK_MIPI_PHY_PORT_0A] = 0,
> + [MTK_MIPI_PHY_PORT_0B] = 0x1000,
> + [MTK_MIPI_PHY_PORT_1] = 0x2000,
> + [MTK_MIPI_PHY_PORT_2] = 0x4000,
> + };
How about provide three subnode (p0/p1/p2)in dts like as tphy driver?
for the port 0, it works as three mode (*_0/0A/0B, or 4d1c/2d1c), we
can distinguish it from phy arguments, also the same for port 1/2
> +
> + struct device *dev = &pdev->dev;
> + struct phy_provider *phy_provider;
> + struct mtk_mipi_dphy *priv;
> + struct resource *res;
> + unsigned int i;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, priv);
> + priv->dev = dev;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->rx = devm_ioremap_resource(dev, res);
use devm_platform_ioremap_resource()
> + if (IS_ERR(priv->rx))
> + return PTR_ERR(priv->rx);
> +
> + for (i = 0; i < ARRAY_SIZE(priv->ports); ++i) {
> + struct mtk_mipi_dphy_port *port = &priv->ports[i];
> + struct phy *phy;
> + void __iomem *base;
> +
> + port->dev = priv;
> + port->id = i;
> + base = priv->rx + ports_offsets[i];
> +
> + port->regmap_base = devm_regmap_init_mmio(port->dev-
> >dev,
> + base,
> + &mt8365_phy
> _regmap_config);
> +
> + port->is_cdphy = i == MTK_MIPI_PHY_PORT_0A ||
> + i == MTK_MIPI_PHY_PORT_0B ||
> + i == MTK_MIPI_PHY_PORT_0;
> + port->is_4d1c = i < MTK_MIPI_PHY_PORT_0A;
> +
> + if (port->is_4d1c)
> + port->regmap_4d1c =
> devm_regmap_init_mmio(port->dev->dev,
> + bas
> e + CSIxB_OFFSET,
> + &mt
> 8365_phy_regmap_config);
> +
> + phy = devm_phy_create(dev, NULL, &mtk_dphy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "Failed to create PHY: %ld\n",
> PTR_ERR(phy));
> + return PTR_ERR(phy);
> + }
> +
> + port->phy = phy;
> + phy_set_drvdata(phy, port);
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev,
> mtk_mipi_dphy_xlate);
> + if (IS_ERR(phy_provider)) {
> + dev_err(dev, "Failed to register PHY provider:
> %ld\n",
> + PTR_ERR(phy_provider));
> + return PTR_ERR(phy_provider);
> + }
> +
> + mutex_init(&priv->lock);
> +
> + return 0;
> +}
> +
> +static int mtk_mipi_dphy_remove(struct platform_device *pdev)
> +{
> + struct mtk_mipi_dphy *priv = platform_get_drvdata(pdev);
> +
> + mutex_destroy(&priv->lock);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mtk_mipi_dphy_of_match[] = {
> + {.compatible = "mediatek,mt8365-mipi-csi"},
prefer to provide a generic compatible if not a specific controller
only for mt8365.
Thanks a lot
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_mipi_dphy_of_match);
> +
> +static struct platform_driver mipi_dphy_pdrv = {
> + .probe = mtk_mipi_dphy_probe,
> + .remove = mtk_mipi_dphy_remove,
> + .driver = {
> + .name = "mtk-mipi-csi",
> + .of_match_table =
> of_match_ptr(mtk_mipi_dphy_of_match),
> + },
> +};
> +
> +module_platform_driver(mipi_dphy_pdrv);
> +
> +MODULE_DESCRIPTION("MTK mipi csi cdphy driver");
> +MODULE_AUTHOR("Louis Kuo <louis.kuo@mediatek.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.40.0
>
^ permalink raw reply [flat|nested] 14+ messages in thread