mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mike Looijmans <mike.looijmans@topic.nl>
To: linux-rtc@vger.kernel.org
Cc: Mike Looijmans <mike.looijmans@topic.nl>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH] rtc: pcf85363: Allow to wake up system without IRQ
Date: Tue, 2 May 2023 07:54:58 +0200	[thread overview]
Message-ID: <20230502055458.11004-1-mike.looijmans@topic.nl> (raw)
In-Reply-To: <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.eeedf5db-4013-4c3b-be1c-1121df58f897@emailsignatures365.codetwo.com>

When wakeup-source is set in the devicetree, set up the device for
using the output as interrupt instead of clock. This is similar to
how other RTC devices handle this.

This allows the clock chip to turn on the board when wired to do
so in hardware.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>

---

 drivers/rtc/rtc-pcf85363.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c
index 8958eadf1c3e..b1543bcdc530 100644
--- a/drivers/rtc/rtc-pcf85363.c
+++ b/drivers/rtc/rtc-pcf85363.c
@@ -434,23 +434,26 @@ static int pcf85363_probe(struct i2c_client *client)
 	pcf85363->rtc->range_max = RTC_TIMESTAMP_END_2099;
 	clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
 
+	if (client->irq > 0 || device_property_read_bool(&client->dev,
+							 "wakeup-source")) {
+		regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
+		regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
+				   PIN_IO_INTA_OUT, PIN_IO_INTAPM);
+		device_init_wakeup(&client->dev, true);
+		set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
+	}
+
 	if (client->irq > 0) {
 		unsigned long irqflags = IRQF_TRIGGER_LOW;
 
 		if (dev_fwnode(&client->dev))
 			irqflags = 0;
-
-		regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
-		regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
-				   PIN_IO_INTA_OUT, PIN_IO_INTAPM);
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
 						NULL, pcf85363_rtc_handle_irq,
 						irqflags | IRQF_ONESHOT,
 						"pcf85363", client);
 		if (ret)
-			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
-		else
-			set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
+			dev_warn(&client->dev, "unable to request IRQ, alarm not functional\n");
 	}
 
 	ret = devm_rtc_register_device(pcf85363->rtc);
-- 
2.17.1


Met vriendelijke groet / kind regards,

Mike Looijmans
System Expert


TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@topicproducts.com
W: www.topic.nl

Please consider the environment before printing this e-mail

       reply	other threads:[~2023-05-02  5:55 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.eeedf5db-4013-4c3b-be1c-1121df58f897@emailsignatures365.codetwo.com>
2023-05-02  5:54 ` Mike Looijmans [this message]
2023-08-16 21:40   ` Alexandre Belloni
2023-08-17  5:42     ` Mike Looijmans
2023-08-17  8:17       ` Alexandre Belloni
2023-08-17  9:02         ` Mike Looijmans
2023-08-17 22:25           ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230502055458.11004-1-mike.looijmans@topic.nl \
    --to=mike.looijmans@topic.nl \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®