mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Mike Looijmans <mike.looijmans@topic.nl>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-rtc@vger.kernel.org,
	Alessandro Zummo <a.zummo@towertech.it>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] rtc: pcf85363: Allow to wake up system without IRQ
Date: Thu, 17 Aug 2023 07:42:25 +0200	[thread overview]
Message-ID: <ec2d7ef3-3dcc-aebb-1a4f-c2e01a09f750@topic.nl> (raw)
In-Reply-To: <202308162140170c067ce7@mail.local>

On 16-08-2023 23:40, Alexandre Belloni wrote:
> Hello Mike,
> 
> Sorry for the very late review, there is a small change that is needed:

Better late than never

> 
> On 02/05/2023 07:54:58+0200, Mike Looijmans wrote:
>> When wakeup-source is set in the devicetree, set up the device for
>> using the output as interrupt instead of clock. This is similar to
>> how other RTC devices handle this.
>>
>> This allows the clock chip to turn on the board when wired to do
>> so in hardware.
>>
>> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
>>
>> ---
>>
>>   drivers/rtc/rtc-pcf85363.c | 17 ++++++++++-------
>>   1 file changed, 10 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/rtc/rtc-pcf85363.c b/drivers/rtc/rtc-pcf85363.c
>> index 8958eadf1c3e..b1543bcdc530 100644
>> --- a/drivers/rtc/rtc-pcf85363.c
>> +++ b/drivers/rtc/rtc-pcf85363.c
>> @@ -434,23 +434,26 @@ static int pcf85363_probe(struct i2c_client *client)
>>   	pcf85363->rtc->range_max = RTC_TIMESTAMP_END_2099;
>>   	clear_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
>>   
>> +	if (client->irq > 0 || device_property_read_bool(&client->dev,
>> +							 "wakeup-source")) {
>> +		regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
>> +		regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
>> +				   PIN_IO_INTA_OUT, PIN_IO_INTAPM);
>> +		device_init_wakeup(&client->dev, true);
>> +		set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
> 
> This should not be done when devm_request_threaded_irq fails.

Yeah, easiest would be to just clear the feature flag when that happens.

> 
>> +	}
>> +
>>   	if (client->irq > 0) {
>>   		unsigned long irqflags = IRQF_TRIGGER_LOW;
>>   
>>   		if (dev_fwnode(&client->dev))
>>   			irqflags = 0;
>> -
>> -		regmap_write(pcf85363->regmap, CTRL_FLAGS, 0);
>> -		regmap_update_bits(pcf85363->regmap, CTRL_PIN_IO,
>> -				   PIN_IO_INTA_OUT, PIN_IO_INTAPM);
>>   		ret = devm_request_threaded_irq(&client->dev, client->irq,
>>   						NULL, pcf85363_rtc_handle_irq,
>>   						irqflags | IRQF_ONESHOT,
>>   						"pcf85363", client);
>>   		if (ret)
>> -			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");
>> -		else
>> -			set_bit(RTC_FEATURE_ALARM, pcf85363->rtc->features);
>> +			dev_warn(&client->dev, "unable to request IRQ, alarm not functional\n");
>>   	}
>>   
>>   	ret = devm_rtc_register_device(pcf85363->rtc);
>> -- 
>> 2.17.1
>>
>>

-- 
Mike Looijmans
System Expert

TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands

T: +31 (0) 499 33 69 69
E: mike.looijmans@topic.nl
W: www.topic.nl



  reply	other threads:[~2023-08-17  5:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.eeedf5db-4013-4c3b-be1c-1121df58f897@emailsignatures365.codetwo.com>
2023-05-02  5:54 ` Mike Looijmans
2023-08-16 21:40   ` Alexandre Belloni
2023-08-17  5:42     ` Mike Looijmans [this message]
2023-08-17  8:17       ` Alexandre Belloni
2023-08-17  9:02         ` Mike Looijmans
2023-08-17 22:25           ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ec2d7ef3-3dcc-aebb-1a4f-c2e01a09f750@topic.nl \
    --to=mike.looijmans@topic.nl \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®