[PATCH v1 0/7] iio: light: vcnl4000: Add features for vncl4040/4200

[PATCH v1 0/7] iio: light: vcnl4000: Add features for vncl4040/4200

[Astrid Rost]

From: Astrid Rost <astridr@axis.com>

Add a more complete support for vncl4040 and vcnl4200, which allows to
change the distance of proximity detection and interrupt support for the
illumination sensor.

Proximity:
  - Interrupt support (new on vcnl4200).
  - Adaptable integration time (new on vcnl4200) - the sampling rate
    changes according to this value.
  - Debounce times - interrupt is asserted if the value is above or
    below a certain threshold.
  - Oversampling ratio - Amount of LED pulses per measurement.
  - Calibration bias - LED current calibration of the sensor.
Illumination:
  - Interrupt support.
  - Adaptable integration time - the sampling rate and scale changes
    according to this value.
  - Debounce times – interrupt is asserted if the value is above or
    below a certain threshold.

Astrid Rost (7):
  [PATCH v1 1/7] iio: light: vcnl4000: Add proximity irq for vcnl4200
  [PATCH v1 2/7] iio: light: vcnl4000: Add proximity ps_it for vcnl4200
  [PATCH v1 3/7] iio: light: vcnl4000: Add als_it for vcnl4040/4200
  [PATCH v1 4/7] iio: light: vcnl4000: add illumination irq vcnl4040/4200
  [PATCH v1 5/7] iio: light: vcnl4000: Add debounce count for vcnl4040/4200
  [PATCH v1 6/7] iio: light: vcnl4000: Add oversampling_ratio for 4040/4200
  [PATCH v1 7/7] iio: light: vcnl4000: Add calibration bias for 4040/4200

 drivers/iio/light/vcnl4000.c | 716 +++++++++++++++++++++++++++++++----
 1 file changed, 648 insertions(+), 68 deletions(-)

-- 
2.30.2