From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <andrew@lunn.ch>, <hkallweit1@gmail.com>, <linux@armlinux.org.uk>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
<s-vadapalli@ti.com>
Subject: [PATCH net v2] net: phy: dp83867: add w/a for packet errors seen with short cables
Date: Tue, 9 May 2023 10:51:24 +0530 [thread overview]
Message-ID: <20230509052124.611875-1-s-vadapalli@ti.com> (raw)
From: Grygorii Strashko <grygorii.strashko@ti.com>
Introduce the W/A for packet errors seen with short cables (<1m) between
two DP83867 PHYs.
The W/A recommended by DM requires FFE Equalizer Configuration tuning by
writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard
and soft resets as follows:
write_reg(0x001F, 0x8000); //hard reset
write_reg(DSP_FFE_CFG, 0x0E81);
write_reg(0x001F, 0x4000); //soft reset
Since DP83867 PHY DM says "Changing this register to 0x0E81, will not
affect Long Cable performance.", enable the W/A by default.
Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
V1 patch at:
https://lore.kernel.org/r/20230508070019.356548-1-s-vadapalli@ti.com
Changes since v1 patch:
- Wrap the line invoking phy_write_mmd(), limiting it to 80 characters.
- Replace 0X0E81 with 0x0e81 in the call to phy_write_mmd().
- Replace 0X012C with 0x012c in the new define for DP83867_DSP_FFE_CFG.
RFC patch at:
https://lore.kernel.org/r/20230425054429.3956535-2-s-vadapalli@ti.com/
Changes since RFC patch:
- Change patch subject to PATCH net.
- Add Fixes tag.
- Check return value of phy_write_mmd().
drivers/net/phy/dp83867.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index d75f526a20a4..bbdcc595715d 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -44,6 +44,7 @@
#define DP83867_STRAP_STS1 0x006E
#define DP83867_STRAP_STS2 0x006f
#define DP83867_RGMIIDCTL 0x0086
+#define DP83867_DSP_FFE_CFG 0x012c
#define DP83867_RXFCFG 0x0134
#define DP83867_RXFPMD1 0x0136
#define DP83867_RXFPMD2 0x0137
@@ -941,8 +942,23 @@ static int dp83867_phy_reset(struct phy_device *phydev)
usleep_range(10, 20);
- return phy_modify(phydev, MII_DP83867_PHYCTRL,
+ err = phy_modify(phydev, MII_DP83867_PHYCTRL,
DP83867_PHYCR_FORCE_LINK_GOOD, 0);
+ if (err < 0)
+ return err;
+
+ err = phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_DSP_FFE_CFG,
+ 0x0e81);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESTART);
+ if (err < 0)
+ return err;
+
+ usleep_range(10, 20);
+
+ return 0;
}
static void dp83867_link_change_notify(struct phy_device *phydev)
--
2.25.1
next reply other threads:[~2023-05-09 5:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-09 5:21 Siddharth Vadapalli [this message]
2023-05-09 8:59 ` Heiner Kallweit
2023-05-09 10:27 ` Siddharth Vadapalli
2023-05-09 10:40 ` Heiner Kallweit
2023-05-10 12:37 ` Siddharth Vadapalli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230509052124.611875-1-s-vadapalli@ti.com \
--to=s-vadapalli@ti.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=srk@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®