mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Heiner Kallweit <hkallweit1@gmail.com>
To: Siddharth Vadapalli <s-vadapalli@ti.com>,
	andrew@lunn.ch, linux@armlinux.org.uk, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, srk@ti.com
Subject: Re: [PATCH net v2] net: phy: dp83867: add w/a for packet errors seen with short cables
Date: Tue, 9 May 2023 10:59:38 +0200	[thread overview]
Message-ID: <7a53f0d3-3e9a-4024-6b19-72ad9c19ab97@gmail.com> (raw)
In-Reply-To: <20230509052124.611875-1-s-vadapalli@ti.com>

On 09.05.2023 07:21, Siddharth Vadapalli wrote:
> From: Grygorii Strashko <grygorii.strashko@ti.com>
> 
> Introduce the W/A for packet errors seen with short cables (<1m) between
> two DP83867 PHYs.
> 
> The W/A recommended by DM requires FFE Equalizer Configuration tuning by
> writing value 0x0E81 to DSP_FFE_CFG register (0x012C), surrounded by hard
> and soft resets as follows:
> 
> write_reg(0x001F, 0x8000); //hard reset
> write_reg(DSP_FFE_CFG, 0x0E81);
> write_reg(0x001F, 0x4000); //soft reset
> 
> Since  DP83867 PHY DM says "Changing this register to 0x0E81, will not
> affect Long Cable performance.", enable the W/A by default.
> 
> Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy")
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> ---
> 
> V1 patch at:
> https://lore.kernel.org/r/20230508070019.356548-1-s-vadapalli@ti.com
> 
> Changes since v1 patch:
> - Wrap the line invoking phy_write_mmd(), limiting it to 80 characters.
> - Replace 0X0E81 with 0x0e81 in the call to phy_write_mmd().
> - Replace 0X012C with 0x012c in the new define for DP83867_DSP_FFE_CFG.
> 
> RFC patch at:
> https://lore.kernel.org/r/20230425054429.3956535-2-s-vadapalli@ti.com/
> 
> Changes since RFC patch:
> - Change patch subject to PATCH net.
> - Add Fixes tag.
> - Check return value of phy_write_mmd().
> 
>  drivers/net/phy/dp83867.c | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
> index d75f526a20a4..bbdcc595715d 100644
> --- a/drivers/net/phy/dp83867.c
> +++ b/drivers/net/phy/dp83867.c
> @@ -44,6 +44,7 @@
>  #define DP83867_STRAP_STS1	0x006E
>  #define DP83867_STRAP_STS2	0x006f
>  #define DP83867_RGMIIDCTL	0x0086
> +#define DP83867_DSP_FFE_CFG	0x012c
>  #define DP83867_RXFCFG		0x0134
>  #define DP83867_RXFPMD1	0x0136
>  #define DP83867_RXFPMD2	0x0137
> @@ -941,8 +942,23 @@ static int dp83867_phy_reset(struct phy_device *phydev)
>  
>  	usleep_range(10, 20);
>  
> -	return phy_modify(phydev, MII_DP83867_PHYCTRL,
> +	err = phy_modify(phydev, MII_DP83867_PHYCTRL,
>  			 DP83867_PHYCR_FORCE_LINK_GOOD, 0);
> +	if (err < 0)
> +		return err;
> +

Would be good to add a comment here explaining what this magic write does.

> +	err = phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_DSP_FFE_CFG,
> +			    0x0e81);
> +	if (err < 0)
> +		return err;
> +
> +	err = phy_write(phydev, DP83867_CTRL, DP83867_SW_RESTART);
> +	if (err < 0)
> +		return err;
> +
> +	usleep_range(10, 20);
> +
> +	return 0;
>  }
>  
>  static void dp83867_link_change_notify(struct phy_device *phydev)


  reply	other threads:[~2023-05-09  9:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-09  5:21 Siddharth Vadapalli
2023-05-09  8:59 ` Heiner Kallweit [this message]
2023-05-09 10:27   ` Siddharth Vadapalli
2023-05-09 10:40     ` Heiner Kallweit
2023-05-10 12:37       ` Siddharth Vadapalli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7a53f0d3-3e9a-4024-6b19-72ad9c19ab97@gmail.com \
    --to=hkallweit1@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=s-vadapalli@ti.com \
    --cc=srk@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®