From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-pci@vger.kernel.org, "Bjorn Helgaas" <helgaas@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Lukas Wunner" <lukas@wunner.de>, "Arnd Bergmann" <arnd@arndb.de>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 12/17] misc: rtsx: Use pcie_lnkctl_clear_and_set() for changing LNKCTL
Date: Thu, 11 May 2023 16:14:36 +0300 [thread overview]
Message-ID: <20230511131441.45704-13-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20230511131441.45704-1-ilpo.jarvinen@linux.intel.com>
Don't assume that only the driver would be accessing LNKCTL. ASPM
policy changes can trigger write to LNKCTL outside of driver's control.
Use pcie_lnkctl_clear_and_set() which does proper locking to avoid
losing concurrent updates to the register value.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
drivers/misc/cardreader/rts5228.c | 6 ++----
drivers/misc/cardreader/rts5261.c | 6 ++----
drivers/misc/cardreader/rtsx_pcr.c | 8 +++-----
3 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/drivers/misc/cardreader/rts5228.c b/drivers/misc/cardreader/rts5228.c
index cfebad51d1d8..74f407fff460 100644
--- a/drivers/misc/cardreader/rts5228.c
+++ b/drivers/misc/cardreader/rts5228.c
@@ -515,8 +515,7 @@ static void rts5228_enable_aspm(struct rtsx_pcr *pcr, bool enable)
val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
val |= (pcr->aspm_en & 0x02);
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
- pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en);
+ pcie_lnkctl_clear_and_set(pcr->pci, PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en);
pcr->aspm_enabled = enable;
}
@@ -527,8 +526,7 @@ static void rts5228_disable_aspm(struct rtsx_pcr *pcr, bool enable)
if (pcr->aspm_enabled == enable)
return;
- pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC, 0);
+ pcie_lnkctl_clear_and_set(pcr->pci, PCI_EXP_LNKCTL_ASPMC, 0);
mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
diff --git a/drivers/misc/cardreader/rts5261.c b/drivers/misc/cardreader/rts5261.c
index b1e76030cafd..830b595e5968 100644
--- a/drivers/misc/cardreader/rts5261.c
+++ b/drivers/misc/cardreader/rts5261.c
@@ -596,8 +596,7 @@ static void rts5261_enable_aspm(struct rtsx_pcr *pcr, bool enable)
val |= (pcr->aspm_en & 0x02);
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
- pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en);
+ pcie_lnkctl_clear_and_set(pcr->pci, PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en);
pcr->aspm_enabled = enable;
}
@@ -609,8 +608,7 @@ static void rts5261_disable_aspm(struct rtsx_pcr *pcr, bool enable)
if (pcr->aspm_enabled == enable)
return;
- pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC, 0);
+ pcie_lnkctl_clear_and_set(pcr->pci, PCI_EXP_LNKCTL_ASPMC, 0);
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
udelay(10);
diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
index 32b7783e9d4f..a9b26846aec6 100644
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -86,9 +86,8 @@ static void rtsx_comm_set_aspm(struct rtsx_pcr *pcr, bool enable)
return;
if (pcr->aspm_mode == ASPM_MODE_CFG) {
- pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- PCI_EXP_LNKCTL_ASPMC,
- enable ? pcr->aspm_en : 0);
+ pcie_lnkctl_clear_and_set(pcr->pci, PCI_EXP_LNKCTL_ASPMC,
+ enable ? pcr->aspm_en : 0);
} else if (pcr->aspm_mode == ASPM_MODE_REG) {
if (pcr->aspm_en & 0x02)
rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, FORCE_ASPM_CTL0 |
@@ -1315,8 +1314,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_init_ocp(pcr);
/* Enable clk_request_n to enable clock power management */
- pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
- 0, PCI_EXP_LNKCTL_CLKREQ_EN);
+ pcie_lnkctl_clear_and_set(pcr->pci, 0, PCI_EXP_LNKCTL_CLKREQ_EN);
/* Enter L1 when host tx idle */
pci_write_config_byte(pdev, 0x70F, 0x5B);
--
2.30.2
next prev parent reply other threads:[~2023-05-11 13:17 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-11 13:14 [PATCH 00/17] PCI: Improve LNKCTL & LNKCTL2 concurrency control Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 01/17] PCI: Add concurrency safe clear_and_set variants for LNKCTL{,2} Ilpo Järvinen
2023-05-11 15:55 ` Bjorn Helgaas
2023-05-11 17:35 ` Ilpo Järvinen
2023-05-11 19:22 ` Bjorn Helgaas
2023-05-11 19:58 ` Ilpo Järvinen
2023-05-11 20:07 ` Lukas Wunner
2023-05-11 20:28 ` Ilpo Järvinen
2023-05-11 22:21 ` Bjorn Helgaas
2023-05-11 21:27 ` Bjorn Helgaas
2023-05-11 20:23 ` Lukas Wunner
2023-05-12 8:25 ` Ilpo Järvinen
2023-05-14 10:10 ` Lukas Wunner
2023-05-15 11:59 ` Ilpo Järvinen
2023-05-15 18:28 ` Bjorn Helgaas
2023-05-15 22:12 ` Lukas Wunner
2023-05-11 13:14 ` [PATCH 02/17] PCI: pciehp: Protect LNKCTL changes Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 03/17] PCI/ASPM: Use pcie_lnkctl_clear_and_set() Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 04/17] drm/amdgpu: Use pcie_lnkctl{,2}_clear_and_set() for changing LNKCTL{,2} Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 05/17] drm/radeon: " Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 06/17] IB/hfi1: " Ilpo Järvinen
2023-05-11 15:19 ` Dean Luick
2023-05-11 20:02 ` Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 07/17] e1000e: Use pcie_lnkctl_clear_and_set() for changing LNKCTL Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 08/17] net/mlx5: " Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 09/17] wifi: ath9k: " Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 10/17] mt76: " Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 11/17] Bluetooth: hci_bcm4377: " Ilpo Järvinen
2023-05-11 13:14 ` Ilpo Järvinen [this message]
2023-05-11 13:14 ` [PATCH 13/17] net/tg3: " Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 14/17] r8169: " Ilpo Järvinen
2023-05-11 19:49 ` Heiner Kallweit
2023-05-11 20:00 ` Ilpo Järvinen
2023-05-11 20:10 ` Lukas Wunner
2023-05-11 20:11 ` Heiner Kallweit
2023-05-11 20:02 ` Lukas Wunner
2023-05-11 20:17 ` Heiner Kallweit
2023-05-11 13:14 ` [PATCH 15/17] wifi: ath11k: " Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 16/17] wifi: ath12k: " Ilpo Järvinen
2023-05-11 13:14 ` [PATCH 17/17] wifi: ath10k: " Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230511131441.45704-13-ilpo.jarvinen@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=arnd@arndb.de \
--cc=gregkh@linuxfoundation.org \
--cc=helgaas@kernel.org \
--cc=kw@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=lukas@wunner.de \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®