mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Wyes Karny <wyes.karny@amd.com>
To: <ray.huang@amd.com>, <rafael@kernel.org>, <viresh.kumar@linaro.org>
Cc: <Mario.Limonciello@amd.com>, <Perry.Yuan@amd.com>,
	<linux-pm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Wyes Karny <wyes.karny@amd.com>,
	"Gautham R . Shenoy" <gautham.shenoy@amd.com>
Subject: [PATCH v2] cpufreq/amd-pstate: Write CPPC enable bit per-socket
Date: Tue, 30 May 2023 13:13:48 +0000	[thread overview]
Message-ID: <20230530131348.4135-1-wyes.karny@amd.com> (raw)

Currently amd_pstate sets CPPC enable bit in MSR_AMD_CPPC_ENABLE only
for the CPU where the module_init happened. But MSR_AMD_CPPC_ENABLE is
per-socket. This causes CPPC enable bit to set for only one socket for
servers with more than one physical packages. To fix this write
MSR_AMD_CPPC_ENABLE per-socket.

Also, handle duplicate calls for cppc_enable, because it's called from
per-policy/per-core callbacks and can result in duplicate MSR writes.

Before the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
	192 0
    192 1

After the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
    384 1

Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
---
v1 -> v2:
- Made CPPC enable read/write per-socket

 drivers/cpufreq/amd-pstate.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
index 5a3d4aa0f45a..45b9e359f638 100644
--- a/drivers/cpufreq/amd-pstate.c
+++ b/drivers/cpufreq/amd-pstate.c
@@ -63,6 +63,7 @@ static struct cpufreq_driver *current_pstate_driver;
 static struct cpufreq_driver amd_pstate_driver;
 static struct cpufreq_driver amd_pstate_epp_driver;
 static int cppc_state = AMD_PSTATE_DISABLE;
+static bool cppc_enabled;
 
 /*
  * AMD Energy Preference Performance (EPP)
@@ -228,7 +229,28 @@ static int amd_pstate_set_energy_pref_index(struct amd_cpudata *cpudata,
 
 static inline int pstate_enable(bool enable)
 {
-	return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable);
+	int ret, cpu;
+	unsigned long logical_proc_id_mask = 0;
+
+	if (enable == cppc_enabled)
+		return 0;
+
+	for_each_present_cpu(cpu) {
+		unsigned long logical_id = topology_logical_die_id(cpu);
+
+		if (test_bit(logical_id, &logical_proc_id_mask))
+			continue;
+
+		set_bit(logical_id, &logical_proc_id_mask);
+
+		ret = wrmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_ENABLE,
+				enable);
+		if (ret)
+			return ret;
+	}
+
+	cppc_enabled = enable;
+	return 0;
 }
 
 static int cppc_enable(bool enable)
@@ -236,6 +258,9 @@ static int cppc_enable(bool enable)
 	int cpu, ret = 0;
 	struct cppc_perf_ctrls perf_ctrls;
 
+	if (enable == cppc_enabled)
+		return 0;
+
 	for_each_present_cpu(cpu) {
 		ret = cppc_set_enable(cpu, enable);
 		if (ret)
@@ -251,6 +276,7 @@ static int cppc_enable(bool enable)
 		}
 	}
 
+	cppc_enabled = enable;
 	return ret;
 }
 
-- 
2.34.1


             reply	other threads:[~2023-05-30 13:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-30 13:13 Wyes Karny [this message]
2023-06-16  7:03 ` Huang Rui
2023-06-16 17:31   ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230530131348.4135-1-wyes.karny@amd.com \
    --to=wyes.karny@amd.com \
    --cc=Mario.Limonciello@amd.com \
    --cc=Perry.Yuan@amd.com \
    --cc=gautham.shenoy@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rafael@kernel.org \
    --cc=ray.huang@amd.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®