From: Huang Rui <ray.huang@amd.com>
To: "Karny, Wyes" <Wyes.Karny@amd.com>
Cc: "rafael@kernel.org" <rafael@kernel.org>,
"viresh.kumar@linaro.org" <viresh.kumar@linaro.org>,
"Limonciello, Mario" <Mario.Limonciello@amd.com>,
"Yuan, Perry" <Perry.Yuan@amd.com>,
"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Shenoy, Gautham Ranjal" <gautham.shenoy@amd.com>
Subject: Re: [PATCH v2] cpufreq/amd-pstate: Write CPPC enable bit per-socket
Date: Fri, 16 Jun 2023 15:03:09 +0800 [thread overview]
Message-ID: <ZIwJLbNa8qRDlkNn@amd.com> (raw)
In-Reply-To: <20230530131348.4135-1-wyes.karny@amd.com>
On Tue, May 30, 2023 at 09:13:48PM +0800, Karny, Wyes wrote:
> Currently amd_pstate sets CPPC enable bit in MSR_AMD_CPPC_ENABLE only
> for the CPU where the module_init happened. But MSR_AMD_CPPC_ENABLE is
> per-socket. This causes CPPC enable bit to set for only one socket for
> servers with more than one physical packages. To fix this write
> MSR_AMD_CPPC_ENABLE per-socket.
>
> Also, handle duplicate calls for cppc_enable, because it's called from
> per-policy/per-core callbacks and can result in duplicate MSR writes.
>
> Before the fix:
> amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
> 192 0
> 192 1
>
> After the fix:
> amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
> 384 1
>
> Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
> Signed-off-by: Wyes Karny <wyes.karny@amd.com>
> ---
> v1 -> v2:
> - Made CPPC enable read/write per-socket
>
> drivers/cpufreq/amd-pstate.c | 28 +++++++++++++++++++++++++++-
> 1 file changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 5a3d4aa0f45a..45b9e359f638 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -63,6 +63,7 @@ static struct cpufreq_driver *current_pstate_driver;
> static struct cpufreq_driver amd_pstate_driver;
> static struct cpufreq_driver amd_pstate_epp_driver;
> static int cppc_state = AMD_PSTATE_DISABLE;
> +static bool cppc_enabled;
>
> /*
> * AMD Energy Preference Performance (EPP)
> @@ -228,7 +229,28 @@ static int amd_pstate_set_energy_pref_index(struct amd_cpudata *cpudata,
>
> static inline int pstate_enable(bool enable)
> {
> - return wrmsrl_safe(MSR_AMD_CPPC_ENABLE, enable);
> + int ret, cpu;
> + unsigned long logical_proc_id_mask = 0;
> +
> + if (enable == cppc_enabled)
> + return 0;
> +
> + for_each_present_cpu(cpu) {
> + unsigned long logical_id = topology_logical_die_id(cpu);
> +
> + if (test_bit(logical_id, &logical_proc_id_mask))
> + continue;
> +
> + set_bit(logical_id, &logical_proc_id_mask);
> +
> + ret = wrmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_ENABLE,
> + enable);
Thanks Wyes, that makes a lot more sense to me. The MSR is per package on
design. We should only write once per package.
Patch is
Acked-by: Huang Rui <ray.huang@amd.com>
> + if (ret)
> + return ret;
> + }
> +
> + cppc_enabled = enable;
> + return 0;
> }
>
> static int cppc_enable(bool enable)
> @@ -236,6 +258,9 @@ static int cppc_enable(bool enable)
> int cpu, ret = 0;
> struct cppc_perf_ctrls perf_ctrls;
>
> + if (enable == cppc_enabled)
> + return 0;
> +
> for_each_present_cpu(cpu) {
> ret = cppc_set_enable(cpu, enable);
> if (ret)
> @@ -251,6 +276,7 @@ static int cppc_enable(bool enable)
> }
> }
>
> + cppc_enabled = enable;
> return ret;
> }
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-06-16 7:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-30 13:13 Wyes Karny
2023-06-16 7:03 ` Huang Rui [this message]
2023-06-16 17:31 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZIwJLbNa8qRDlkNn@amd.com \
--to=ray.huang@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Perry.Yuan@amd.com \
--cc=Wyes.Karny@amd.com \
--cc=gautham.shenoy@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome