From: Abel Vesa <abel.vesa@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550
Date: Mon, 5 Jun 2023 14:56:07 +0300 [thread overview]
Message-ID: <20230605115607.921308-1-abel.vesa@linaro.org> (raw)
The PM8550 uses only NLDOs 515 and the LDO 6 through 8 are low voltage
type, so fix accordingly.
Fixes: e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
drivers/regulator/qcom-rpmh-regulator.c | 30 ++++++++++++-------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index b0a58c62b1e2..f3b280af0773 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1057,21 +1057,21 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = {
};
static const struct rpmh_vreg_init_data pm8550_vreg_data[] = {
- RPMH_VREG("ldo1", "ldo%s1", &pmic5_pldo, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1-l4-l10"),
RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l13-l14"),
- RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
- RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo515, "vdd-l1-l4-l10"),
RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l16"),
- RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo_lv, "vdd-l6-l7"),
- RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo_lv, "vdd-l6-l7"),
- RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo_lv, "vdd-l8-l9"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l6-l7"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l6-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_pldo, "vdd-l8-l9"),
RPMH_VREG("ldo9", "ldo%s9", &pmic5_pldo, "vdd-l8-l9"),
- RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l1-l4-l10"),
- RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo, "vdd-l11"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo515, "vdd-l1-l4-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_nldo515, "vdd-l11"),
RPMH_VREG("ldo12", "ldo%s12", &pmic5_pldo, "vdd-l12"),
RPMH_VREG("ldo13", "ldo%s13", &pmic5_pldo, "vdd-l2-l13-l14"),
RPMH_VREG("ldo14", "ldo%s14", &pmic5_pldo, "vdd-l2-l13-l14"),
- RPMH_VREG("ldo15", "ldo%s15", &pmic5_pldo, "vdd-l15"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo515, "vdd-l15"),
RPMH_VREG("ldo16", "ldo%s16", &pmic5_pldo, "vdd-l5-l16"),
RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo, "vdd-l17"),
RPMH_VREG("bob1", "bob%s1", &pmic5_bob, "vdd-bob1"),
@@ -1086,9 +1086,9 @@ static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = {
RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps525_lv, "vdd-s4"),
RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps525_lv, "vdd-s5"),
RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_mv, "vdd-s6"),
- RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
- RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
- RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
{}
};
@@ -1101,9 +1101,9 @@ static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = {
RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
- RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"),
- RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"),
- RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo515, "vdd-l1"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo515, "vdd-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo515, "vdd-l3"),
{}
};
--
2.34.1
next reply other threads:[~2023-06-05 11:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-05 11:56 Abel Vesa [this message]
2023-06-05 13:45 ` Rajendra Nayak
2023-06-07 17:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230605115607.921308-1-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®