From: Yazen Ghannam <yazen.ghannam@amd.com>
To: <x86@kernel.org>
Cc: <linux-kernel@vger.kernel.org>,
<platform-driver-x86@vger.kernel.org>, <markgross@kernel.org>,
<hdegoede@redhat.com>, <Shyam-sundar.S-k@amd.com>,
<linux-edac@vger.kernel.org>, <clemens@ladisch.de>,
<jdelvare@suse.com>, <linux@roeck-us.net>,
<linux-hwmon@vger.kernel.org>, <mario.limonciello@amd.com>,
<babu.moger@amd.com>, Yazen Ghannam <yazen.ghannam@amd.com>
Subject: [PATCH v2 6/6] hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters
Date: Thu, 15 Jun 2023 11:03:28 -0500 [thread overview]
Message-ID: <20230615160328.419610-7-yazen.ghannam@amd.com> (raw)
In-Reply-To: <20230615160328.419610-1-yazen.ghannam@amd.com>
Currently, k10temp_get_ccd_support() takes as input "pdev" and "data".
However, "pdev" is already included in "data". Furthermore, the "pdev"
parameter is no longer used in k10temp_get_ccd_support(), since its use
was moved into read_ccd_temp_reg().
Drop the "pdev" input parameter as it is no longer needed.
No functional change is intended.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
Link:
https://lore.kernel.org/r/20230516202430.4157216-7-yazen.ghannam@amd.com
v1->v2:
* Add Acked-by from Guenter.
drivers/hwmon/k10temp.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index dfbba8b72f43..dce97aab2fa7 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -377,8 +377,7 @@ static const struct hwmon_chip_info k10temp_chip_info = {
.info = k10temp_info,
};
-static void k10temp_get_ccd_support(struct pci_dev *pdev,
- struct k10temp_data *data, int limit)
+static void k10temp_get_ccd_support(struct k10temp_data *data, int limit)
{
u32 regval;
int i;
@@ -443,18 +442,18 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
case 0x11: /* Zen APU */
case 0x18: /* Zen+ APU */
data->ccd_offset = 0x154;
- k10temp_get_ccd_support(pdev, data, 4);
+ k10temp_get_ccd_support(data, 4);
break;
case 0x31: /* Zen2 Threadripper */
case 0x60: /* Renoir */
case 0x68: /* Lucienne */
case 0x71: /* Zen2 */
data->ccd_offset = 0x154;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0xa0 ... 0xaf:
data->ccd_offset = 0x300;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
}
} else if (boot_cpu_data.x86 == 0x19) {
@@ -467,21 +466,21 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
case 0x21: /* Zen3 Ryzen Desktop */
case 0x50 ... 0x5f: /* Green Sardine */
data->ccd_offset = 0x154;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0x40 ... 0x4f: /* Yellow Carp */
data->ccd_offset = 0x300;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0x60 ... 0x6f:
case 0x70 ... 0x7f:
data->ccd_offset = 0x308;
- k10temp_get_ccd_support(pdev, data, 8);
+ k10temp_get_ccd_support(data, 8);
break;
case 0x10 ... 0x1f:
case 0xa0 ... 0xaf:
data->ccd_offset = 0x300;
- k10temp_get_ccd_support(pdev, data, 12);
+ k10temp_get_ccd_support(data, 12);
break;
}
} else {
--
2.34.1
next prev parent reply other threads:[~2023-06-15 16:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-15 16:03 [PATCH v2 0/6] Enhance AMD SMN Error Checking Yazen Ghannam
2023-06-15 16:03 ` [PATCH v2 1/6] EDAC/amd64: Remove unused register accesses Yazen Ghannam
2023-06-15 16:03 ` [PATCH v2 2/6] EDAC/amd64: Check return value of amd_smn_read() Yazen Ghannam
2023-06-15 16:03 ` [PATCH v2 3/6] hwmon: (k10temp) " Yazen Ghannam
2023-06-16 2:21 ` Guenter Roeck
2023-06-15 16:03 ` [PATCH v2 4/6] x86/amd_nb: Enhance SMN access error checking Yazen Ghannam
2023-06-15 16:03 ` [PATCH v2 5/6] hwmon: (k10temp) Define helper function to read CCD temp Yazen Ghannam
2023-06-16 2:22 ` Guenter Roeck
2023-06-15 16:03 ` Yazen Ghannam [this message]
2023-06-19 2:42 ` [PATCH v2 0/6] Enhance AMD SMN Error Checking Mario Limonciello
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230615160328.419610-7-yazen.ghannam@amd.com \
--to=yazen.ghannam@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=babu.moger@amd.com \
--cc=clemens@ladisch.de \
--cc=hdegoede@redhat.com \
--cc=jdelvare@suse.com \
--cc=linux-edac@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mario.limonciello@amd.com \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®