* [PATCH] firmware: ti_sci: Fixup documentation errors
@ 2023-06-21 2:16 Nishanth Menon
2023-07-12 14:31 ` Nishanth Menon
0 siblings, 1 reply; 2+ messages in thread
From: Nishanth Menon @ 2023-06-21 2:16 UTC (permalink / raw)
To: Santosh Shilimkar, Tero Kristo, Nishanth Menon
Cc: vigneshr, praneeth, u-kumar1, linux-kernel, linux-arm-kernel
Fix up documentation errors, squashes the following warnings:
drivers/firmware/ti_sci.c:1986: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_set_irq'
drivers/firmware/ti_sci.c:2034: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_free_irq'
drivers/firmware/ti_sci.c:2630: warning: Function parameter or member 'bootvector' not described in 'ti_sci_cmd_proc_set_config'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'bv' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'cfg_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'ctrl_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'sts_flags' not described in 'ti_sci_cmd_proc_get_status'
drivers/firmware/ti_sci.c:2746: warning: expecting prototype for ti_sci_cmd_get_boot_status(). Prototype was for ti_sci_cmd_proc_get_status() instead
drivers/firmware/ti_sci.c:3265: warning: Function parameter or member 'sub_type' not described in 'devm_ti_sci_get_resource'
drivers/firmware/ti_sci.c:3265: warning: Excess function parameter 'suub_type' description in 'devm_ti_sci_get_resource'
Signed-off-by: Nishanth Menon <nm@ti.com>
---
drivers/firmware/ti_sci.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 91aaa0ca9bde..26a37f47f4ca 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -1976,8 +1976,6 @@ static int ti_sci_free_irq(const struct ti_sci_handle *handle, u32 valid_params,
* @src_index: IRQ source index within the source device
* @dst_id: Device ID of the IRQ destination
* @dst_host_irq: IRQ number of the destination device
- * @vint_irq: Boolean specifying if this interrupt belongs to
- * Interrupt Aggregator.
*
* Return: 0 if all went fine, else return appropriate error.
*/
@@ -2024,8 +2022,6 @@ static int ti_sci_cmd_set_event_map(const struct ti_sci_handle *handle,
* @src_index: IRQ source index within the source device
* @dst_id: Device ID of the IRQ destination
* @dst_host_irq: IRQ number of the destination device
- * @vint_irq: Boolean specifying if this interrupt belongs to
- * Interrupt Aggregator.
*
* Return: 0 if all went fine, else return appropriate error.
*/
@@ -2618,6 +2614,7 @@ static int ti_sci_cmd_proc_handover(const struct ti_sci_handle *handle,
* configuration flags
* @handle: Pointer to TI SCI handle
* @proc_id: Processor ID this request is for
+ * @bootvector: Processor Boot vector (start address)
* @config_flags_set: Configuration flags to be set
* @config_flags_clear: Configuration flags to be cleared.
*
@@ -2734,9 +2731,13 @@ static int ti_sci_cmd_proc_set_control(const struct ti_sci_handle *handle,
}
/**
- * ti_sci_cmd_get_boot_status() - Command to get the processor boot status
+ * ti_sci_cmd_proc_get_status() - Command to get the processor boot status
* @handle: Pointer to TI SCI handle
* @proc_id: Processor ID this request is for
+ * @bv: Processor Boot vector (start address)
+ * @cfg_flags: Processor specific configuration flags
+ * @ctrl_flags: Processor specific control flags
+ * @sts_flags: Processor specific status flags
*
* Return: 0 if all went well, else returns appropriate error value.
*/
@@ -3254,7 +3255,7 @@ EXPORT_SYMBOL_GPL(devm_ti_sci_get_of_resource);
* @handle: TISCI handle
* @dev: Device pointer to which the resource is assigned
* @dev_id: TISCI device id to which the resource is assigned
- * @suub_type: TISCI resource subytpe representing the resource.
+ * @sub_type: TISCI resource subytpe representing the resource.
*
* Return: Pointer to ti_sci_resource if all went well else appropriate
* error pointer.
--
2.40.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] firmware: ti_sci: Fixup documentation errors
2023-06-21 2:16 [PATCH] firmware: ti_sci: Fixup documentation errors Nishanth Menon
@ 2023-07-12 14:31 ` Nishanth Menon
0 siblings, 0 replies; 2+ messages in thread
From: Nishanth Menon @ 2023-07-12 14:31 UTC (permalink / raw)
To: Santosh Shilimkar, Tero Kristo, Nishanth Menon
Cc: vigneshr, praneeth, u-kumar1, linux-kernel, linux-arm-kernel
Hi Nishanth Menon,
On Tue, 20 Jun 2023 21:16:19 -0500, Nishanth Menon wrote:
> Fix up documentation errors, squashes the following warnings:
> drivers/firmware/ti_sci.c:1986: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_set_irq'
> drivers/firmware/ti_sci.c:2034: warning: Excess function parameter 'vint_irq' description in 'ti_sci_cmd_free_irq'
> drivers/firmware/ti_sci.c:2630: warning: Function parameter or member 'bootvector' not described in 'ti_sci_cmd_proc_set_config'
> drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'bv' not described in 'ti_sci_cmd_proc_get_status'
> drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'cfg_flags' not described in 'ti_sci_cmd_proc_get_status'
> drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'ctrl_flags' not described in 'ti_sci_cmd_proc_get_status'
> drivers/firmware/ti_sci.c:2746: warning: Function parameter or member 'sts_flags' not described in 'ti_sci_cmd_proc_get_status'
> drivers/firmware/ti_sci.c:2746: warning: expecting prototype for ti_sci_cmd_get_boot_status(). Prototype was for ti_sci_cmd_proc_get_status() instead
> drivers/firmware/ti_sci.c:3265: warning: Function parameter or member 'sub_type' not described in 'devm_ti_sci_get_resource'
> drivers/firmware/ti_sci.c:3265: warning: Excess function parameter 'suub_type' description in 'devm_ti_sci_get_resource'
>
> [...]
I have applied the following to branch ti-drivers-soc-next on [1].
Thank you!
[1/1] firmware: ti_sci: Fixup documentation errors
commit: 3e67fd8dd2711a63adfe0fa087de38d86a6eb8d5
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-07-12 14:31 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-21 2:16 [PATCH] firmware: ti_sci: Fixup documentation errors Nishanth Menon
2023-07-12 14:31 ` Nishanth Menon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®