Re: [PATCH] arm64: zynqmp: Fix dwc3 usb interrupt description

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Michal,

Thank you for the patch.

On Mon, Jun 19, 2023 at 09:37:54AM +0200, Michal Simek wrote:
> Based on DT binding dwc_usb3 is single entry without anything else. That's
> why combination dwc3_usb3, otg is not allowed. That's why split it to host
> and peripheral pair which both points to the same IRQ.
> DWC3 code is reading these two properties first before generic dwc_usb3.
> 
> Signed-off-by: Michal Simek <michal.simek@amd.com>
> ---
> 
>  arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> index 02cfcc716936..e8104ffc6663 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
> @@ -888,8 +888,8 @@ dwc3_0: usb@fe200000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0xfe200000 0x0 0x40000>;
>  				interrupt-parent = <&gic>;
> -				interrupt-names = "dwc_usb3", "otg";
> -				interrupts = <0 65 4>, <0 69 4>;
> +				interrupt-names = "host", "peripheral", "otg";
> +				interrupts = <0 65 4>, <0 65 4>, <0 69 4>;

This should read

				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;

The issue isn't introduced by this patch, so it should probably be fixed
by a separate patch on top, to convert the whole zynqmp.dtsi file. Do
you have any plan to do so, or should I ?

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>  				clock-names = "bus_early", "ref";
>  				iommus = <&smmu 0x860>;
>  				snps,quirk-frame-length-adjustment = <0x20>;
> @@ -915,8 +915,8 @@ dwc3_1: usb@fe300000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0xfe300000 0x0 0x40000>;
>  				interrupt-parent = <&gic>;
> -				interrupt-names = "dwc_usb3", "otg";
> -				interrupts = <0 70 4>, <0 74 4>;
> +				interrupt-names = "host", "peripheral", "otg";
> +				interrupts = <0 70 4>, <0 70 4>, <0 74 4>;
>  				clock-names = "bus_early", "ref";
>  				iommus = <&smmu 0x861>;
>  				snps,quirk-frame-length-adjustment = <0x20>;

-- 
Regards,

Laurent Pinchart