* [PATCH] watchdog: core: stop watchdog when executing poweroff command
@ 2023-06-30 5:39 Meng Li
2023-06-30 5:44 ` Guenter Roeck
0 siblings, 1 reply; 2+ messages in thread
From: Meng Li @ 2023-06-30 5:39 UTC (permalink / raw)
To: wim, linux, linux-watchdog; +Cc: linux-kernel, meng.li
From: Meng Li <meng.li@windriver.com>
On some platforms, for example, Intel SoC FPGA platform, the watchdog is
started in from u-boot, and so kernel will create a timer and work to
keep watchdog alive. .But when user executes commands "poweroff" or
"shutdown -h", the system is reset when watchdog triggers timeout even
if WDOG_STOP_ON_REBOOT is set in watchdog driver. The root cause is
that the watchdog not stopped properly because the SYS_POWER_OFF case
is not supported in nofify callback function. So, add this case to stop
watchdog when executing poweroff command.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
---
drivers/watchdog/watchdog_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
index d4c5a736fdcb..5b55ccae06d4 100644
--- a/drivers/watchdog/watchdog_core.c
+++ b/drivers/watchdog/watchdog_core.c
@@ -161,7 +161,7 @@ static int watchdog_reboot_notifier(struct notifier_block *nb,
struct watchdog_device *wdd;
wdd = container_of(nb, struct watchdog_device, reboot_nb);
- if (code == SYS_DOWN || code == SYS_HALT) {
+ if (code == SYS_DOWN || code == SYS_HALT || code == SYS_POWER_OFF) {
if (watchdog_hw_running(wdd)) {
int ret;
--
2.17.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] watchdog: core: stop watchdog when executing poweroff command
2023-06-30 5:39 [PATCH] watchdog: core: stop watchdog when executing poweroff command Meng Li
@ 2023-06-30 5:44 ` Guenter Roeck
0 siblings, 0 replies; 2+ messages in thread
From: Guenter Roeck @ 2023-06-30 5:44 UTC (permalink / raw)
To: Meng Li, wim, linux-watchdog; +Cc: linux-kernel
On 6/29/23 22:39, Meng Li wrote:
> From: Meng Li <meng.li@windriver.com>
>
> On some platforms, for example, Intel SoC FPGA platform, the watchdog is
> started in from u-boot, and so kernel will create a timer and work to
> keep watchdog alive. .But when user executes commands "poweroff" or
> "shutdown -h", the system is reset when watchdog triggers timeout even
> if WDOG_STOP_ON_REBOOT is set in watchdog driver. The root cause is
> that the watchdog not stopped properly because the SYS_POWER_OFF case
> is not supported in nofify callback function. So, add this case to stop
> watchdog when executing poweroff command.
>
> Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/watchdog/watchdog_core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
> index d4c5a736fdcb..5b55ccae06d4 100644
> --- a/drivers/watchdog/watchdog_core.c
> +++ b/drivers/watchdog/watchdog_core.c
> @@ -161,7 +161,7 @@ static int watchdog_reboot_notifier(struct notifier_block *nb,
> struct watchdog_device *wdd;
>
> wdd = container_of(nb, struct watchdog_device, reboot_nb);
> - if (code == SYS_DOWN || code == SYS_HALT) {
> + if (code == SYS_DOWN || code == SYS_HALT || code == SYS_POWER_OFF) {
> if (watchdog_hw_running(wdd)) {
> int ret;
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-06-30 5:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-30 5:39 [PATCH] watchdog: core: stop watchdog when executing poweroff command Meng Li
2023-06-30 5:44 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®